Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] The first page is missing



At 02:17 PM 8/17/00 +0200, you wrote:
>Hi,
>
>I've installed Hylafax 4.1b2(patched) on a Suse 6.4 and libtiff 3.5.4,
>tiff 3.5.4 with 2 modems (Elsa 28.8 and TKR 33.6). I took the original
>Elsa-config (elsa.de).
>Also, my tiff2ps doesn't work fine (bottom) orientated, the patch and
>new compiling didn't do any change

Wasn't this bottom-oriented thing fixed in libtiff 3.5.5 ?  Anyway, 3.5.4
was known to be buggy, so an upgrade wouldn't be a bad idea anyway.

>and sometimes, a page is missing

No idea about the missing page... except to suspect that it's getting lost
in the conversion somewhere (tiff2ps again?).  If you submit postscript
files for faxing do you ever lose a page?  If not, then it's probably in
the conversion process to ps.

>var/spool/fax/log:
>
... snip ...
>Aug 17 14:03:46.69: [ 4851]: --> [6:+FET:0]
>Aug 17 14:03:46.69: [ 4851]: RECV recv MPS (more pages, same document)
>Aug 17 14:03:46.69: [ 4851]: --> [5:ERROR]
>Aug 17 14:03:46.69: [ 4851]: MODEM Command error

Here's a problem.  Fixing these is usually done by correcting the config
file.  Interesting, however, that this error does not reaccur on the next
page in the same place.

>Aug 17 14:03:46.69: [ 4851]: RECV send RTN (retrain negative)
... snip ...
>Aug 17 14:04:40.70: [ 4851]: --> [16:+FPS:1,8D9,0,0,0]
>Aug 17 14:04:41.87: [ 4851]: --> [6:+FET:0]
>Aug 17 14:04:41.87: [ 4851]: RECV recv MPS (more pages, same document)
>Aug 17 14:04:41.87: [ 4851]: --> [2:OK]
>Aug 17 14:04:41.87: [ 4851]: RECV send MCF (message confirmation)



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services