Re: [hylafax-users] Remote fax not getting falure message

["Bernd Proissl" <news@proissl.de>]

> -----Original Message-----
> From: hylafax-users-bounce@hylafax.org
> [mailto:hylafax-users-bounce@hylafax.org]On Behalf Of Jason Bachman
> Sent: Thursday, July 20, 2000 9:49 PM
> To: hylafax-users@hylafax.org
> Subject: [hylafax-users] Remote fax not getting falure message
>
>
> Hello list,
>
> I am running Hylafax 4.0pl2 on Linux-Mandrake 6.1
>
> I am having intermittent trouble with sending machines not receiving a
> reject/error message when there is a problem with a fax transmission.  It
> seems like if the LAST PAGE of a received fax fails, the server
> notices the
> failure but either doesn't report the failure to the sender, or the sender
> does not receive the failure message.  Attached is a segment of a log that
> shows the problem.  This was supposed to be an 8 page fax.  We received 7
> pages and the sender said that his report said that the fax was sent OK. I
> have had other such complaints. Is this the infamous RTN bug??   Thanks in
no, i do not think so,
the RTN bug is related to outgoing faxes only.
Mabe you have to check you flow control? The receiving data seems to be of
poor
quality. (AFAIK)

Bernd
> advance for any advice.
>
> Jason
>
> ----------------
>
> Jul 17 09:30:11.10: [ 4873]: RECV recv MPS (more pages, same document)
> Jul 17 09:30:11.10: [ 4873]: <-- [9:AT+FTH=3\r]
> Jul 17 09:30:11.24: [ 4873]: --> [7:CONNECT]
> Jul 17 09:30:12.50: [ 4873]: --> [2:OK]
> Jul 17 09:30:12.50: [ 4873]: RECV send MCF (message confirmation)
> Jul 17 09:30:12.50: [ 4873]: RECV FAX (00004041): from 717 464
> 9046, page 7
> in 0:24, INF, 3.85 line/mm, 2-D MR
> Jul 17 09:30:12.50: [ 4873]: <-- [11:AT+FRM=146\r]
> Jul 17 09:30:13.92: [ 4873]: --> [7:CONNECT]
> Jul 17 09:30:13.92: [ 4873]: RECV: begin page
> Jul 17 09:30:17.99: [ 4873]: RECV: 12 total lines, 7 bad lines, 2
> consecutive bad lines
> Jul 17 09:30:17.99: [ 4873]: RECV: REJECT page quality, 41% good
> lines (95%
> required)
> Jul 17 09:30:17.99: [ 4873]: RECV: end page
> Jul 17 09:30:17.99: [ 4873]: --> [10:NO CARRIER]
> Jul 17 09:30:17.99: [ 4873]: <-- [9:AT+FRH=3\r]
> Jul 17 09:30:18.20: [ 4873]: --> [7:CONNECT]
> Jul 17 09:30:19.02: [ 4873]: --> [2:OK]
> Jul 17 09:30:19.02: [ 4873]: RECV recv EOP (no more pages or documents)
> Jul 17 09:30:19.02: [ 4873]: <-- [9:AT+FTH=3\r]
> Jul 17 09:30:19.19: [ 4873]: --> [7:CONNECT]
> Jul 17 09:30:20.44: [ 4873]: --> [2:OK]
> Jul 17 09:30:20.44: [ 4873]: RECV send RTN (retrain negative)
> Jul 17 09:30:20.44: [ 4873]: <-- [9:AT+FRH=3\r]
> Jul 17 09:30:20.71: [ 4873]: --> [7:CONNECT]
> Jul 17 09:30:21.76: [ 4873]: --> [2:OK]
> Jul 17 09:30:21.76: [ 4873]: RECV recv DCN
> Jul 17 09:30:21.76: [ 4873]: RECV FAX (00004041): recvq/fax03526.tif from
> 717 464 9046, route to <unspecified>, 7 pages in 3:11
> Jul 17 09:30:21.79: [ 4873]: RECV FAX: COMREC received DCN
> Jul 17 09:30:21.79: [ 4873]: <-- [9:AT+FTH=3\r]
> Jul 17 09:30:21.90: [ 4873]: --> [7:CONNECT]
> Jul 17 09:30:23.15: [ 4873]: --> [2:OK]
> Jul 17 09:30:23.15: [ 4873]: RECV FAX (00004041): session with
> 717 464 9046
> terminated abnormally: COMREC received DCN
> Jul 17 09:30:23.18: [ 4873]: RECV FAX: bin/faxrcvd "recvq/fax03526.tif"
> "ttyS1" "00004041" "COMREC received DCN"
>
>
>
> ____________________ HylaFAX(tm) Users Mailing List
> _______________________
>  To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org
> < /dev/null
>



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null