|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
[hylafax-users] AW: ModemDialCmd (was accidentaly Re: last ditch effort)
ATX3 is not the problem, I would get "NO DIALTONE" if X3 wasn't set, and
it's taken care of in followin config setting:
ModemResetCmds: AT&FX3
Christian
> -----Ursprüngliche Nachricht-----
> Von: Bernd Proissl [SMTP:news@proissl.de]
> Gesendet am: Montag, 17. Juli 2000 00:54
> An: Christian Pluym; hylafax-users@hylafax.org
> Betreff: [hylafax-users] Re: last ditch effort
>
> > Hello!
> > Our hylafax-4.1beta2-5rh6 on RedHat 6.2 & Digi Acceleport RAS 8 boards,
> > newest libtiff etc. runs fine, but when we uncomment the config line:
> >
> > ModemDialCmd: ATDT0,%s@
> >
> > so our users don't have to dial 0 to get through our PBX, the logs show
> if you uncomment "atdt0" then you users do not have to dial 0?
>
> maybe your problem is that your modem does not recognize the dialtone
> of your pbx (in contrast to the dialtone of you phone company)
> and reports BUSY in this situation.
>
> have a look at your modem manual
> try to add X3 to your dial command
>
> Bernd
>
> > "BUSY SIGNAL DETECTED" after ATDT0... The same problem when we
> > simply leave
> >
> > ModemDialCmd: ATDT%s@
> >
> > Trace looks like this.
> > [...]
> > Jul 14 14:20:02.19: [ 1376]: DIAL 1309
> > Jul 14 14:20:02.19: [ 1376]: <-- [10:ATDT1309@\r]
> > Jul 14 14:21:12.42: [ 1376]: --> [4:BUSY]
> > Jul 14 14:21:12.42: [ 1376]: SEND FAILED: Busy signal detected
> > [...]
> >
> > It only works when we leave this config line commented out, and then the
> > trace looks like:
> >
> > [...]
> > Jul 14 14:54:56.88: [ 861]: DIAL 1309
> > Jul 14 14:54:56.88: [ 861]: <-- [13:ATDT1309\r]
> > Jul 14 14:55:11.44: [ 861]: --> [4:+FCO]
> > [...]
> >
> > And of course, the fax we're trying to connect is NOT busy.
> >
> > Thanks in advance for your help.
> > Christian
> >
> >
> >
> > ____________________ HylaFAX(tm) Users Mailing List
> > _______________________
> > To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org
> > < /dev/null
> >
>
>
> ____________________ HylaFAX(tm) Users Mailing List
> _______________________
> To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org <
> /dev/null
____________________ HylaFAX(tm) Users Mailing List _______________________
To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
