|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
[hylafax-users] No response to MPS or EOP ??
Hi fellows I have searched the mailing list archive about this
problem and I found one message with a posible solution ; the answer :is
to use the "-1" option in my sendfax command
line, forcing 1-D MR compression , my problem is that I use the WHFC ,
how can I send this command with this client ???
Jul 06 14:45:06.60: [ 1767]: SESSION BEGIN 00001195 1114670166
Jul 06 14:45:06.60: [ 1767]: SEND FAX: JOB 219 DEST 4670166 COMMID
00001195
Jul 06 14:45:06.60: [ 1767]: DELAY 2600 ms
Jul 06 14:45:09.20: [ 1767]: <-- [15:ATE0V1Q0S0=0H0\r]
Jul 06 14:45:09.22: [ 1767]: --> [2:OK]
Jul 06 14:45:09.22: [ 1767]: <-- [12:ATS8=2S7=60\r]
Jul 06 14:45:09.24: [ 1767]: --> [2:OK]
Jul 06 14:45:09.24: [ 1767]: <-- [12:AT+FCLASS=1\r]
Jul 06 14:45:09.26: [ 1767]: --> [2:OK]
Jul 06 14:45:09.26: [ 1767]: <-- [5:ATM0\r]
Jul 06 14:45:09.27: [ 1767]: --> [2:OK]
Jul 06 14:45:09.27: [ 1767]: <-- [12:AT+FCLASS=1\r]
Jul 06 14:45:09.39: [ 1767]: --> [2:OK]
Jul 06 14:45:09.39: [ 1767]: DIAL 4670166
Jul 06 14:45:09.39: [ 1767]: <-- [12:ATDT4670166\r]
Jul 06 14:45:25.42: [ 1767]: --> [7:CONNECT]
Jul 06 14:45:27.17: [ 1767]: --> [2:OK]
Jul 06 14:45:27.17: [ 1767]: <-- [9:AT+FRH=3\r]
Jul 06 14:45:27.19: [ 1767]: --> [7:CONNECT]
Jul 06 14:45:27.86: [ 1767]: --> [2:OK]
Jul 06 14:45:27.86: [ 1767]: REMOTE CSI "4670166"
Jul 06 14:45:27.86: [ 1767]: <-- [9:AT+FRH=3\r]
Jul 06 14:45:27.88: [ 1767]: --> [7:CONNECT]
Jul 06 14:45:28.13: [ 1767]: --> [2:OK]
Jul 06 14:45:28.13: [ 1767]: REMOTE best rate 9600 bit/s
Jul 06 14:45:28.13: [ 1767]: REMOTE max page width 1728 pixels in 215 mm
Jul 06 14:45:28.13: [ 1767]: REMOTE max unlimited page length
Jul 06 14:45:28.13: [ 1767]: REMOTE best vres 7.7 line/mm
Jul 06 14:45:28.13: [ 1767]: REMOTE best format 2-D MMR
Jul 06 14:45:28.13: [ 1767]: REMOTE supports T.30 Annex A, ECM
Jul 06 14:45:28.13: [ 1767]: REMOTE best 10 ms, 5 ms/scanline
Jul 06 14:45:28.13: [ 1767]: USE 9600 bit/s
Jul 06 14:45:28.13: [ 1767]: USE 10 ms, 5 ms/scanline
Jul 06 14:45:28.13: [ 1767]: SEND file "docq/doc216.ps;40"
Jul 06 14:45:28.13: [ 1767]: USE page width 1728 pixels in 215 mm
Jul 06 14:45:28.13: [ 1767]: USE unlimited page length
Jul 06 14:45:28.13: [ 1767]: USE 3.85 line/mm
Jul 06 14:45:28.13: [ 1767]: USE 2-D MR
Jul 06 14:45:28.13: [ 1767]: SEND training at v.29 9600 bit/s
Jul 06 14:45:28.13: [ 1767]: USE 2-D MR
Jul 06 14:45:28.13: [ 1767]: SEND training at v.29 9600 bit/s
Jul 06 14:45:28.13: [ 1767]: <-- [9:AT+FTH=3\r]
Jul 06 14:45:28.19: [ 1767]: --> [7:CONNECT]
Jul 06 14:45:28.19: [ 1767]: <-- data [23]
Jul 06 14:45:28.19: [ 1767]: <-- data [2]
Jul 06 14:45:29.97: [ 1767]: --> [7:CONNECT]
Jul 06 14:45:29.97: [ 1767]: <-- data [6]
Jul 06 14:45:29.97: [ 1767]: <-- data [2]
Jul 06 14:45:30.41: [ 1767]: --> [2:OK]
Jul 06 14:45:30.41: [ 1767]: DELAY 75 ms
Jul 06 14:45:30.49: [ 1767]: <-- [10:AT+FTM=96\r]
Jul 06 14:45:30.55: [ 1767]: --> [7:CONNECT]
Jul 06 14:45:30.55: [ 1767]: <-- data [1024]
Jul 06 14:45:30.55: [ 1767]: <-- data [776]
Jul 06 14:45:30.55: [ 1767]: <-- data [2]
Jul 06 14:45:32.50: [ 1767]: --> [2:OK]
Jul 06 14:45:32.50: [ 1767]: <-- [9:AT+FRH=3\r]
Jul 06 14:45:32.89: [ 1767]: --> [7:CONNECT]
Jul 06 14:45:33.75: [ 1767]: --> [2:OK]
Jul 06 14:45:33.75: [ 1767]: TRAINING succeeded
Jul 06 14:45:33.75: [ 1767]: <-- [10:AT+FTM=96\r]
Jul 06 14:45:33.81: [ 1767]: --> [7:CONNECT]
Jul 06 14:45:33.81: [ 1767]: SEND begin page
Jul 06 14:45:33.82: [ 1767]: <-- data [1029]
Jul 06 14:45:33.82: [ 1767]: <-- data [1024]
Jul 06 14:45:33.82: [ 1767]: <-- data [1027]
Jul 06 14:45:33.82: [ 1767]: <-- data [1029]
Jul 06 14:45:33.82: [ 1767]: <-- data [1026]
Jul 06 14:45:35.81: [ 1767]: <-- data [1030]
Jul 06 14:45:35.81: [ 1767]: <-- data [1027]
Jul 06 14:45:35.81: [ 1767]: <-- data [1031]
Jul 06 14:45:37.81: [ 1767]: <-- data [1032]
Jul 06 14:46:10.43: [ 1767]: MODEM <Empty line>
Jul 06 14:46:10.43: [ 1767]: <-- data [1]
Jul 06 14:46:10.48: [ 1767]: --> [2:OK]
Jul 06 14:46:10.48: [ 1767]: SEND send MPS (more pages, same document)
Jul 06 14:46:10.48: [ 1767]: <-- [9:AT+FTH=3\r]
Jul 06 14:46:10.54: [ 1767]: --> [7:CONNECT]
Jul 06 14:46:10.54: [ 1767]: <-- data [3]
Jul 06 14:46:10.54: [ 1767]: <-- data [2]
Jul 06 14:46:11.85: [ 1767]: --> [2:OK]
Jul 06 14:46:11.85: [ 1767]: <-- [9:AT+FRH=3\r]
Jul 06 14:46:14.95: [ 1767]: --> [0:]
Jul 06 14:46:14.95: [ 1767]: MODEM <Empty line>
Jul 06 14:46:14.95: [ 1767]: <-- data [1]
Jul 06 14:46:15.00: [ 1767]: --> [2:OK]
Jul 06 14:46:15.00: [ 1767]: <-- [9:AT+FTH=3\r]
Jul 06 14:46:15.05: [ 1767]: --> [7:CONNECT]
Jul 06 14:46:15.05: [ 1767]: <-- data [3]
Jul 06 14:46:15.05: [ 1767]: <-- data [2]
Jul 06 14:46:16.36: [ 1767]: --> [2:OK]
Jul 06 14:46:16.36: [ 1767]: <-- [5:ATH0\r]
Jul 06 14:46:17.90: [ 1767]: --> [2:OK]
Jul 06 14:46:17.90: [ 1767]: SESSION END
____________________ HylaFAX(tm) Users Mailing List _______________________
To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
