|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
[hylafax-users] Not even Tiff/F format gets sent ok, log file looks ok
Hello!
Even if I have pure Tiff/F format already or the fax server creates it
in the
process, when i give it a text file, the result is the same (i only get
upper
halfs of the letters in first line of text, as i mentioned).
>From the WHFC client I even get nothing, although the document gets to
the
server side converted from eig.: MS WORD to postscript correctly.
I checked all the documents after the conversion in the './docq'
directory.
Everything looks just fine.
I tried hw and sw flow control and results are the same.
Thanks
Borut
Jun 08 08:55:18.89: [17066]: SESSION BEGIN 00000059 10137
Jun 08 08:55:18.89: [17066]: SEND FAX: JOB 98 DEST 37 COMMID 00000059
Jun 08 08:55:18.89: [17066]: DELAY 2600 ms
Jun 08 08:55:21.49: [17066]: <-- [15:ATE0V1Q0S0=0H0\r]
Jun 08 08:55:21.63: [17066]: --> [2:OK]
Jun 08 08:55:21.63: [17066]: <-- [12:ATS8=2S7=60\r]
Jun 08 08:55:21.77: [17066]: --> [2:OK]
Jun 08 08:55:21.77: [17066]: <-- [12:AT+FCLASS=1\r]
Jun 08 08:55:21.91: [17066]: --> [2:OK]
Jun 08 08:55:21.91: [17066]: <-- [5:ATM0\r]
Jun 08 08:55:22.05: [17066]: --> [2:OK]
Jun 08 08:55:22.05: [17066]: <-- [12:AT+FCLASS=1\r]
Jun 08 08:55:22.29: [17066]: --> [2:OK]
Jun 08 08:55:22.29: [17066]: DIAL 37
Jun 08 08:55:22.29: [17066]: <-- [7:ATDT37\r]
Jun 08 08:55:38.14: [17066]: --> [7:CONNECT]
Jun 08 08:55:39.89: [17066]: --> [2:OK]
Jun 08 08:55:39.89: [17066]: <-- [9:AT+FRH=3\r]
Jun 08 08:55:39.91: [17066]: --> [7:CONNECT]
Jun 08 08:55:40.59: [17066]: --> [2:OK]
Jun 08 08:55:40.59: [17066]: REMOTE CSI "+386 61 1790037"
Jun 08 08:55:40.59: [17066]: <-- [9:AT+FRH=3\r]
Jun 08 08:55:40.61: [17066]: --> [7:CONNECT]
Jun 08 08:55:40.88: [17066]: --> [2:OK]
Jun 08 08:55:40.88: [17066]: REMOTE best rate 14400 bit/s
Jun 08 08:55:40.88: [17066]: REMOTE max page width 1728 pixels in 215 mm
Jun 08 08:55:40.88: [17066]: REMOTE max unlimited page length
Jun 08 08:55:40.88: [17066]: REMOTE best vres 7.7 line/mm
Jun 08 08:55:40.88: [17066]: REMOTE best format 2-D MMR
Jun 08 08:55:40.88: [17066]: REMOTE supports T.30 Annex A, ECM
Jun 08 08:55:40.88: [17066]: REMOTE best 10 ms/scanline
Jun 08 08:55:40.88: [17066]: USE 14400 bit/s
Jun 08 08:55:40.88: [17066]: USE 10 ms/scanline
Jun 08 08:55:40.88: [17066]: SEND file "docq/doc100.ps;00"
Jun 08 08:55:40.88: [17066]: USE page width 1728 pixels in 215 mm
Jun 08 08:55:40.88: [17066]: USE unlimited page length
Jun 08 08:55:40.88: [17066]: USE 3.85 line/mm
Jun 08 08:55:40.88: [17066]: USE 1-D MR
Jun 08 08:55:40.88: [17066]: SEND training at v.17 14400 bit/s
Jun 08 08:55:40.88: [17066]: <-- [9:AT+FTH=3\r]
Jun 08 08:55:41.08: [17066]: --> [7:CONNECT]
Jun 08 08:55:41.08: [17066]: <-- data [23]
Jun 08 08:55:41.08: [17066]: <-- data [2]
Jun 08 08:55:41.11: [17066]: --> [7:CONNECT]
Jun 08 08:55:41.11: [17066]: <-- data [6]
Jun 08 08:55:41.11: [17066]: <-- data [2]
Jun 08 08:55:43.06: [17066]: --> [2:OK]
Jun 08 08:55:43.06: [17066]: DELAY 75 ms
Jun 08 08:55:43.14: [17066]: <-- [11:AT+FTM=145\r]
Jun 08 08:55:44.62: [17066]: --> [7:CONNECT]
Jun 08 08:55:44.62: [17066]: <-- data [1024]
Jun 08 08:55:44.62: [17066]: <-- data [1024]
Jun 08 08:55:44.62: [17066]: <-- data [652]
Jun 08 08:55:44.62: [17066]: <-- data [2]
Jun 08 08:55:46.15: [17066]: --> [2:OK]
Jun 08 08:55:46.15: [17066]: <-- [9:AT+FRH=3\r]
Jun 08 08:55:46.40: [17066]: --> [7:CONNECT]
Jun 08 08:55:47.42: [17066]: --> [2:OK]
Jun 08 08:55:47.42: [17066]: TRAINING succeeded
Jun 08 08:55:47.42: [17066]: <-- [11:AT+FTM=146\r]
Jun 08 08:55:47.68: [17066]: --> [7:CONNECT]
Jun 08 08:55:47.68: [17066]: SEND begin page
Jun 08 08:55:47.68: [17066]: <-- data [1028]
Jun 08 08:55:47.68: [17066]: <-- data [1024]
Jun 08 08:55:47.68: [17066]: <-- data [216]
Jun 08 08:55:47.68: [17066]: SENT 2264 bytes of data
Jun 08 08:55:47.68: [17066]: SEND 1D RTC
Jun 08 08:55:47.68: [17066]: <-- data [29]
Jun 08 08:55:47.68: [17066]: <-- data [2]
Jun 08 08:55:47.68: [17066]: SEND end page
Jun 08 08:55:48.98: [17066]: --> [2:OK]
Jun 08 08:55:48.98: [17066]: DELAY 95 ms
Jun 08 08:55:49.08: [17066]: SEND send EOP (no more pages or documents)
Jun 08 08:55:49.08: [17066]: <-- [9:AT+FTH=3\r]
Jun 08 08:55:49.24: [17066]: --> [7:CONNECT]
Jun 08 08:55:49.24: [17066]: <-- data [3]
Jun 08 08:55:49.24: [17066]: <-- data [2]
Jun 08 08:55:50.42: [17066]: --> [2:OK]
Jun 08 08:55:50.42: [17066]: <-- [9:AT+FRH=3\r]
Jun 08 08:55:50.84: [17066]: --> [7:CONNECT]
Jun 08 08:55:51.67: [17066]: --> [2:OK]
Jun 08 08:55:51.67: [17066]: SEND recv MCF (message confirmation)
Jun 08 08:55:51.67: [17066]: SEND FAX (00000059): FROM borut.kurnik@add.si TO 37 (page 1 of 1 sent in 0:11)
Jun 08 08:55:51.67: [17066]: SEND FAX (00000059): FROM borut.kurnik@add.si TO 37 (docq/doc100.ps;00 sent in 0:11)
Jun 08 08:55:51.67: [17066]: <-- [9:AT+FTH=3\r]
Jun 08 08:55:51.87: [17066]: --> [7:CONNECT]
Jun 08 08:55:51.87: [17066]: <-- data [3]
Jun 08 08:55:51.87: [17066]: <-- data [2]
Jun 08 08:55:53.05: [17066]: --> [2:OK]
Jun 08 08:55:53.05: [17066]: <-- [5:ATH0\r]
Jun 08 08:55:53.29: [17066]: --> [2:OK]
Jun 08 08:55:53.29: [17066]: SESSION END
begin:vcard
n:Kurnik;Borut
x-mozilla-html:FALSE
org:ADD, d.o.o.
adr:;;;;;;
version:2.1
email;internet:borut.kurnik@add.si
x-mozilla-cpt:;0
fn:Borut Kurnik
end:vcard
