[hylafax-users] puzzle

[kees <kees@schoen.nl>]

Hi Friends,

I'm running the beta with the protocol patches and it looks well.
However sometimes I receive the following mail:

=======================================

To: FaxMaster@schoen3.schoen.nl
From: The HylaFAX Receive Agent <fax@schoen.nl>
Subject: facsimile not received

An attempt to receive facsimile on ttyS1 failed because:

    

    ---- Transcript of session follows ----

Jun 05 15:59:50.15: [  255]: SESSION BEGIN 00000380 31104208681
Jun 05 15:59:50.15: [  255]: <-- [4:ATA\r]
Jun 05 15:59:59.40: [  255]: --> [5:+FCON]
Jun 05 15:59:59.40: [  255]: ANSWER: FAX CONNECTION
Jun 05 15:59:59.40: [  255]: RECV FAX: begin
Jun 05 16:00:01.33: [  255]: --> [29:+FTSI: "      +31 10 412XXXX"]
Jun 05 16:00:01.33: [  255]: REMOTE TSI "+31 10 412XXXX"
Jun 05 16:00:01.44: [  255]: --> [22:+FDCS: 0,3,0,2,1,0,0,0]
Jun 05 16:00:01.44: [  255]: REMOTE wants 9600 bit/s
Jun 05 16:00:01.44: [  255]: REMOTE wants page width 1728 pixels in 215 mm
Jun 05 16:00:01.44: [  255]: REMOTE wants unlimited page length 
Jun 05 16:00:01.44: [  255]: REMOTE wants 3.85 line/mm
Jun 05 16:00:01.44: [  255]: REMOTE wants 2-D MR
Jun 05 16:00:03.41: [  255]: --> [2:OK]
Jun 05 16:00:03.41: [  255]: <-- [7:AT+FDR\r]
Jun 05 16:00:05.07: [  255]: --> [5:+FCFR]
Jun 05 16:00:05.07: [  255]: --> [22:+FDCS: 0,3,0,2,1,0,0,0]
Jun 05 16:00:05.07: [  255]: REMOTE wants 9600 bit/s
Jun 05 16:00:05.07: [  255]: REMOTE wants page width 1728 pixels in 215 mm
Jun 05 16:00:05.07: [  255]: REMOTE wants unlimited page length 
Jun 05 16:00:05.07: [  255]: REMOTE wants 3.85 line/mm
Jun 05 16:00:05.07: [  255]: REMOTE wants 2-D MR
Jun 05 16:00:05.77: [  255]: --> [7:CONNECT]
Jun 05 16:00:05.77: [  255]: RECV: begin page
Jun 05 16:00:05.77: [  255]: RECV: send trigger 022
Jun 05 16:00:32.15: [  255]: RECV: 31421 bytes of data, 1168 total lines
Jun 05 16:00:32.15: [  255]: --> [8:+FPTS: 1]
Jun 05 16:00:33.37: [  255]: --> [7:+FET: 2]
Jun 05 16:00:33.37: [  255]: RECV recv EOP (no more pages or documents)
Jun 05 16:00:33.37: [  255]: --> [2:OK]
Jun 05 16:00:33.37: [  255]: RECV send MCF (message confirmation)
Jun 05 16:00:33.37: [  255]: RECV FAX (00000380): from +31 10 412XXXX,
page 1 in 0:30, INF, 3.85 line/mm, 2-D MR
Jun 05 16:00:33.37: [  255]: RECV FAX (00000380): recvq/fax00067.tif from +31 10 4124139, route to <unspecified>, 1 pages in 0:34
Jun 05 16:00:33.41: [  255]: <-- [7:AT+FDR\r]
Jun 05 16:00:37.28: [  255]: --> [8:+FHNG: 0]
Jun 05 16:00:37.28: [  255]: REMOTE HANGUP: Normal and proper end of connection (code 0)
Jun 05 16:00:37.28: [  255]: RECV FAX: bin/faxrcvd "recvq/fax00067.tif" "ttyS1" "00000380" ""

==================================================================

The resulting tif file is 8 bytes long:

0000	49 49 2a 00 00 00 00 00                            II*.....
0008

So there is no error but also no resulting file. I've seen that in the
past with version v4.0pl2 as well.

Regards

Kees




____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null