flexfax: COMREC code 72

[Matthew McCowan <MatthewM@motherwell.com.au>]

Ladies and Gents,

I'm wondering if anyone can help me with this one ...

Hylafax-4.1beta1-1rh6(.rpm) running on a RedHat 6.0 (i386) box with an
internal Dynalink VoiceCard56 Pro ISA (Rockwell based) modem.

It receives from most senders without a hitch, but receiving faxes from one
particular sender generates a COMREC error every time.

The resulting log file:
--------------------------------------------------------------
May 09 08:30:20.02: [ 4612]: SESSION BEGIN 00000909 61555555555
May 09 08:30:20.02: [ 4612]: <-- [4:ATA\r]
May 09 08:30:22.02: [ 4612]: --> [3:FAX]
May 09 08:30:22.02: [ 4612]: ANSWER: FAX CONNECTION
May 09 08:30:22.02: [ 4612]: RECV FAX: begin
May 09 08:30:32.88: [ 4612]: --> [5:+FCON]
May 09 08:30:33.33: [ 4612]: --> [22:+FDCS: 1,3,0,2,0,0,0,0]
May 09 08:30:33.33: [ 4612]: REMOTE wants 9600 bit/s
May 09 08:30:33.33: [ 4612]: REMOTE wants page width 1728 pixels in 215 mm
May 09 08:30:33.33: [ 4612]: REMOTE wants unlimited page length 
May 09 08:30:33.33: [ 4612]: REMOTE wants 7.7 line/mm
May 09 08:30:33.33: [ 4612]: REMOTE wants 1-D MR
May 09 08:30:33.33: [ 4612]: --> [2:OK]
May 09 08:30:33.33: [ 4612]: <-- [7:AT+FDR\r]
May 09 08:31:02.20: [ 4612]: --> [9:+FHNG: 72]
May 09 08:31:02.20: [ 4612]: REMOTE HANGUP: COMREC error (code 72)
May 09 08:31:02.20: [ 4612]: RECV FAX (00000909): recvq/fax00884.tif from ,
route to <unspecified>, 0 pages in 0:40
May 09 08:31:02.23: [ 4612]: RECV FAX: COMREC error
May 09 08:31:02.23: [ 4612]: RECV FAX (00000909): session with  terminated
abnormally: COMREC error
May 09 08:31:02.23: [ 4612]: RECV FAX: bin/faxrcvd "recvq/fax00884.tif"
"ttyS1" "00000909" "COMREC error"
May 09 08:31:02.78: [ 4612]: RECV FAX: end
May 09 08:31:02.78: [ 4612]: SESSION END
-----------------------------------------------------------

The config.ttyS1 (relevant modem stuff):
----------------------------------------------------------
ModemType:		Class2		# use class 2 interface
ModemRate:		38400
ModemFlowControl:	rtscts		# default
#
#ModemResetCmds:	AT&F2		# what you want for a Supra
ModemNoFlowCmd:		AT&K		# disable flow control cmd
ModemHardFlowCmd:	AT&K3		# hardware flow control cmd
ModemSoftFlowCmd:	AT&K4		# software flow control cmd
ModemSetupDTRCmd:	AT&D3		# DTR off causes modem to reset
#ModemSetupDTRCmd:	AT&D2S25=1S38=0	# Dynalink 1414VE needs this
ModemSetupDCDCmd:	AT&C1		# DCD follows carrier
ModemSetupAACmd:	AT+FAA=1+FCLASS=0 # enable in current class
#
ModemSendFillOrder:	LSB2MSB		# as expected
ModemRecvFillOrder:	MSB2LSB		# opposite of what makes sense
#
ModemAnswerFaxBeginCmd:	"<38400><rtscts>"	# modem switches on fax
receive
#
# Caller ID configuration setup for Supra.
#
#QualifyCID:		etc/cid		# CID access control list file
#CIDNumber:		"NMBR = "	# pattern string for phone number
info
#CIDName:		"NAME = "	# pattern string for identity info
Class2RecvDataTrigger:	"\022"
------------------------------------------------

So far it's just the 1 sender that is having any trouble. I'd like to reduce
this to 0 ;)

TIA

Matt McCowan

PS If anyone is interested I've made some _very_ basic changes to faxrcvd to
print and archive inbound faxes ...


**********************************************************************
This email and any files transmitted with it from Motherwell 
Information Systems may contain information which is 
privileged, confidential and protected from disclosure.
If it is not addressed to you, please immediately contact 
postmaster@motherwell.co.nz and do not use, disclose, 
copy, distribute or retain any of it without our authority.

**********************************************************************