|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
RE: MT3334ZDX Partial Success
I hate to bomb the list with log files but on Tim's recommendation...
Here's a log of a receive with many errors. I'm pretty sure the problem is
in the config file for the modem since I also have a second modem on the
same machine that's working perfectly.
Any ideas?
Thanks,
Kirk Bocek
May 05 06:15:21.25: [ 7250]: SESSION BEGIN 00000054 <<removed - KNB>>
May 05 06:15:21.25: [ 7250]: <-- [4:ATA\r]
May 05 06:15:38.63: [ 7250]: --> [5:+FCON]
May 05 06:15:38.63: [ 7250]: ANSWER: FAX CONNECTION
May 05 06:15:38.63: [ 7250]: RECV FAX: begin
May 05 06:15:38.63: [ 7250]: --> [28:+FTSI:" <<removed - KNB>>"]
May 05 06:15:38.63: [ 7250]: REMOTE TSI "<<removed - KNB>>"
May 05 06:15:38.91: [ 7250]: --> [21:+FDCS:0,5,0,2,0,0,0,1]
May 05 06:15:38.91: [ 7250]: REMOTE wants 14400 bit/s
May 05 06:15:38.91: [ 7250]: REMOTE wants page width 1728 pixels in 215 mm
May 05 06:15:38.91: [ 7250]: REMOTE wants unlimited page length
May 05 06:15:38.91: [ 7250]: REMOTE wants 3.85 line/mm
May 05 06:15:38.91: [ 7250]: REMOTE wants 1-D MR
May 05 06:15:38.91: [ 7250]: --> [2:OK]
May 05 06:15:38.91: [ 7250]: <-- [7:AT+FDR\r]
May 05 06:15:43.01: [ 7250]: --> [5:+FCFR]
May 05 06:15:43.91: [ 7250]: --> [7:CONNECT]
May 05 06:15:43.91: [ 7250]: RECV: begin page
May 05 06:15:43.91: [ 7250]: RECV: send trigger 022
May 05 06:15:43.91: [ 7250]: <-- data [1]
May 05 06:15:59.33: [ 7250]: RECV: 21517 bytes of data, 1087 total lines
May 05 06:15:59.33: [ 7250]: --> [12:+FPTS:1,1086]
May 05 06:16:00.58: [ 7250]: --> [6:+FET:0]
May 05 06:16:00.58: [ 7250]: RECV recv MPS (more pages, same document)
May 05 06:16:00.58: [ 7250]: --> [2:OK]
May 05 06:16:00.58: [ 7250]: RECV send MCF (message confirmation)
May 05 06:16:00.58: [ 7250]: RECV FAX (00000054): from <<removed - KNB>>,
page 1 in 0:22, INF, 3.85 line/mm, 1-D MR
May 05 06:16:00.58: [ 7250]: <-- [7:AT+FDR\r]
May 05 06:16:02.46: [ 7250]: --> [7:CONNECT]
May 05 06:16:02.46: [ 7250]: RECV: begin page
May 05 06:16:02.46: [ 7250]: RECV: send trigger 022
May 05 06:16:02.46: [ 7250]: <-- data [1]
May 05 06:16:18.18: [ 7250]: RECV: 21997 bytes of data, 1075 total lines
May 05 06:16:18.18: [ 7250]: --> [12:+FPTS:1,1073]
May 05 06:16:19.43: [ 7250]: --> [6:+FET:0]
May 05 06:16:19.43: [ 7250]: RECV recv MPS (more pages, same document)
May 05 06:16:19.43: [ 7250]: --> [2:OK]
May 05 06:16:19.44: [ 7250]: RECV send MCF (message confirmation)
May 05 06:16:19.44: [ 7250]: RECV FAX (00000054): from <<removed - KNB>>,
page 2 in 0:19, INF, 3.85 line/mm, 1-D MR
May 05 06:16:19.44: [ 7250]: <-- [7:AT+FDR\r]
May 05 06:16:21.30: [ 7250]: --> [7:CONNECT]
May 05 06:16:21.30: [ 7250]: RECV: begin page
May 05 06:16:21.30: [ 7250]: RECV: send trigger 022
May 05 06:16:21.30: [ 7250]: <-- data [1]
May 05 06:16:32.13: [ 7250]: RECV: 10645 bytes of data, 1086 total lines
May 05 06:16:32.14: [ 7250]: --> [12:+FPTS:1,1084]
May 05 06:16:33.38: [ 7250]: --> [6:+FET:0]
May 05 06:16:33.38: [ 7250]: RECV recv MPS (more pages, same document)
May 05 06:16:33.39: [ 7250]: --> [2:OK]
May 05 06:16:33.39: [ 7250]: RECV send MCF (message confirmation)
May 05 06:16:33.39: [ 7250]: RECV FAX (00000054): from <<removed - KNB>>,
page 3 in 0:14, INF, 3.85 line/mm, 1-D MR
May 05 06:16:33.39: [ 7250]: <-- [7:AT+FDR\r]
May 05 06:16:35.25: [ 7250]: --> [7:CONNECT]
May 05 06:16:35.26: [ 7250]: RECV: begin page
May 05 06:16:35.26: [ 7250]: RECV: send trigger 022
May 05 06:16:35.26: [ 7250]: <-- data [1]
May 05 06:16:52.21: [ 7250]: RECV: 24478 bytes of data, 1079 total lines
May 05 06:16:52.21: [ 7250]: --> [12:+FPTS:1,1077]
May 05 06:16:53.47: [ 7250]: --> [6:+FET:0]
May 05 06:16:53.47: [ 7250]: RECV recv MPS (more pages, same document)
May 05 06:16:53.47: [ 7250]: --> [2:OK]
May 05 06:16:53.47: [ 7250]: RECV send MCF (message confirmation)
May 05 06:16:53.47: [ 7250]: RECV FAX (00000054): from <<removed - KNB>>,
page 4 in 0:20, INF, 3.85 line/mm, 1-D MR
May 05 06:16:53.47: [ 7250]: <-- [7:AT+FDR\r]
May 05 06:16:55.34: [ 7250]: --> [7:CONNECT]
May 05 06:16:55.34: [ 7250]: RECV: begin page
May 05 06:16:55.34: [ 7250]: RECV: send trigger 022
May 05 06:16:55.34: [ 7250]: <-- data [1]
May 05 06:17:10.94: [ 7250]: RECV: 22560 bytes of data, 1081 total lines
May 05 06:17:10.94: [ 7250]: --> [12:+FPTS:1,1079]
May 05 06:17:12.20: [ 7250]: --> [6:+FET:2]
May 05 06:17:12.20: [ 7250]: RECV recv EOP (no more pages or documents)
May 05 06:17:12.20: [ 7250]: --> [2:OK]
May 05 06:17:12.20: [ 7250]: RECV send MCF (message confirmation)
May 05 06:17:12.20: [ 7250]: RECV FAX (00000054): from <<removed - KNB>>,
page 5 in 0:19, INF, 3.85 line/mm, 1-D MR
May 05 06:17:12.20: [ 7250]: RECV FAX (00000054): recvq/fax00052.tif from
<<removed - KNB>>, route to <unspecified>, 5 pages in 1:34
May 05 06:17:12.20: [ 7250]: <-- [7:AT+FDR\r]
May 05 06:17:14.81: [ 7250]: --> [7:+FHNG:0]
May 05 06:17:14.81: [ 7250]: REMOTE HANGUP: Normal and proper end of
connection (code 0)
May 05 06:17:14.81: [ 7250]: RECV FAX: bin/faxrcvd "recvq/fax00052.tif"
"ttyS1" "00000054" ""
May 05 06:17:15.85: [ 7250]: RECV FAX: end
May 05 06:17:15.85: [ 7250]: SESSION END
-----Original Message-----
From: Tim Rice [mailto:tim@trr.metro.net]
Sent: Friday, May 05, 2000 9:16 AM
To: Kirk Bocek
Subject: RE: flexfax: MT3334ZDX Partial Success
On Fri, 5 May 2000, Kirk Bocek wrote:
> Thanks for the help Tim, but it didn't help. At random times, errors
> (sometimes many) will creep into received pages. I've tried setting for
both
> hardware and software handshaking.
>
> Any other ideas?
The settings I gave you were for hardware handshking.
Send your logs to the list and see if anyone can spot the trouble.
>
>
>
> -----Original Message-----
> From: owner-flexfax@celestial.com [mailto:owner-flexfax@celestial.com]On
> Behalf Of Tim Rice
> Sent: Thursday, May 04, 2000 6:59 PM
> To: Kirk Bocek
> Cc: flexfax@sgi.com
> Subject: Re: flexfax: MT3334ZDX Partial Success
>
>
> On Thu, 4 May 2000, Kirk Bocek wrote:
>
> > Well, I mostly got a MultiTech MT3334ZDX modem to work with a
> > hylafax-4.1beta1-1rh6.i386 install. I added the following lines from the
> > rockwell-k56.config patch to the config file generated by faxaddmodem:
> >
> > ModemSendFillOrder: LSB2MSB # as expected
> > ModemRecvFillOrder: MSB2LSB # opposite of what makes sense
> > Class2RecvDataTrigger: "\022" # a la 2388-B
> >
> > And it _seemed_ to work. However...
> >
> If you are running in Class2 mode you might find these helpfull.
>
> Class2XmitWaitForXON: no
> #
> Class2APQueryCmd: "" # AT+FAP=? not supported on this
> modem
> Class2NFLOCmd: AT+FLO=0 # Class 2: no flow control
> Class2SFLOCmd: AT+FLO=1 # Class 2: software flow control
> Class2HFLOCmd: AT+FLO=2 # Class 2: hardware flow control
>
> > Multi-page faxes have many errors in them.
> >
> > Is there something else I could add to the config file or is this part
of
> > the transmission error patches I see posted?
> >
> > Kirk Bocek
> >
>
> --
> Tim Rice Multitalents (707) 874-1130
> tim@trr.metro.net
>
>
--
Tim Rice Multitalents (707) 874-1130
tim@trr.metro.net
