|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: received fax contains only first page
What are you using to view the received fax?
Chris Long
menominee@skyenet.net
----- Original Message -----
From: Feher Sandor <fehers@freemail.c3.hu>
To: <flexfax@sgi.com>
Sent: Thursday, February 17, 2000 10:00 AM
Subject: flexfax: received fax contains only first page
> Hi!
>
> The problem is the subject 8-). When such fax is coming that has many
> pages (more than one) after successfully receiving the stored .tif only
> contains the first page of the fax. The log says OK, 2 or more pages was
> received but doesn't store it anyway. Sorry for the long log but I don't
> know which part can be important.
>
>
> -------------- cut ---------------
>
> Feb 17 10:15:42.45: [ 485]: SESSION BEGIN 00000044 3694513644
> Feb 17 10:15:42.45: [ 485]: <-- [4:ATA\r]
> Feb 17 10:15:47.61: [ 485]: --> [7:CONNECT]
> Feb 17 10:15:47.61: [ 485]: ANSWER: FAX CONNECTION
> Feb 17 10:15:47.61: [ 485]: MODEM input buffering enabled
> Feb 17 10:15:47.61: [ 485]: RECV FAX: begin
> Feb 17 10:15:47.61: [ 485]: MODEM input buffering disabled
> Feb 17 10:15:47.61: [ 485]: <-- HDLC<23:FF C0 02 2C 2C 6C B4 CC 8C AC
> F4 2C 9C 04 6C CC D4 04 04 04 04 04 04>
> Feb 17 10:15:47.61: [ 485]: <-- data [23]
> Feb 17 10:15:47.61: [ 485]: <-- data [2]
> Feb 17 10:15:48.75: [ 485]: --> [7:CONNECT]
> Feb 17 10:15:48.75: [ 485]: <-- HDLC<10:FF C8 01 00 77 5F 01 79 03 C0>
> Feb 17 10:15:48.75: [ 485]: <-- data [10]
> Feb 17 10:15:48.75: [ 485]: <-- data [2]
> Feb 17 10:15:49.20: [ 485]: --> [2:OK]
> Feb 17 10:15:49.20: [ 485]: <-- [9:AT+FRH=3\r]
> Feb 17 10:15:52.30: [ 485]: --> [0:]
> Feb 17 10:15:52.30: [ 485]: MODEM <Empty line>
> Feb 17 10:15:52.30: [ 485]: MODEM TIMEOUT: waiting for v.21 carrier
> Feb 17 10:15:52.30: [ 485]: <-- data [1]
> Feb 17 10:15:52.31: [ 485]: --> [2:OK]
> Feb 17 10:15:52.31: [ 485]: DELAY 1500 ms
> Feb 17 10:15:53.81: [ 485]: <-- [9:AT+FTH=3\r]
> Feb 17 10:15:53.95: [ 485]: --> [7:CONNECT]
> Feb 17 10:15:53.95: [ 485]: <-- HDLC<23:FF C0 02 2C 2C 6C B4 CC 8C AC
> F4 2C 9C 04 6C CC D4 04 04 04 04 04 04>
> Feb 17 10:15:53.95: [ 485]: <-- data [23]
> Feb 17 10:15:53.95: [ 485]: <-- data [2]
> Feb 17 10:15:55.19: [ 485]: --> [7:CONNECT]
> Feb 17 10:15:55.19: [ 485]: <-- HDLC<10:FF C8 01 00 77 5F 01 79 03 C0>
> Feb 17 10:15:55.19: [ 485]: <-- data [10]
> Feb 17 10:15:55.19: [ 485]: <-- data [2]
> Feb 17 10:15:55.64: [ 485]: --> [2:OK]
> Feb 17 10:15:55.64: [ 485]: <-- [9:AT+FRH=3\r]
> Feb 17 10:15:56.14: [ 485]: --> [7:CONNECT]
> Feb 17 10:15:57.94: [ 485]: --> HDLC<25:FF C0 C2 0C AC 1C 0C 8C AC 04
> 2C 9C 04 6C CC 04 04 04 04 04 04 04 04 4D 09>
> Feb 17 10:15:57.95: [ 485]: --> [2:OK]
> Feb 17 10:15:57.95: [ 485]: REMOTE TSI "36 94 510850"
> Feb 17 10:15:57.95: [ 485]: <-- [9:AT+FRH=3\r]
> Feb 17 10:15:57.98: [ 485]: --> [7:CONNECT]
> Feb 17 10:15:58.28: [ 485]: --> HDLC<9:FF C8 C1 00 61 1F 00 3E CD>
> Feb 17 10:15:58.28: [ 485]: --> [2:OK]
> Feb 17 10:15:58.28: [ 485]: REMOTE wants 9600 bit/s
> Feb 17 10:15:58.28: [ 485]: REMOTE wants page width 1728 pixels in 215
> mm
> Feb 17 10:15:58.28: [ 485]: REMOTE wants unlimited page length
> Feb 17 10:15:58.28: [ 485]: REMOTE wants 3.85 line/mm
> Feb 17 10:15:58.28: [ 485]: REMOTE wants 2-D MR
> Feb 17 10:15:58.28: [ 485]: RECV training at v.29 9600 bit/s
> Feb 17 10:15:58.28: [ 485]: <-- [10:AT+FRM=96\r]
> Feb 17 10:15:58.86: [ 485]: --> [7:CONNECT]
> Feb 17 10:16:00.39: [ 485]: RECV: TCF 1824 bytes, 22% non-zero, 1179
> zero-run
> Feb 17 10:16:00.39: [ 485]: RECV: reject TCF (too many non-zero, max
> 10%)
> Feb 17 10:16:00.39: [ 485]: RECV: reject TCF (zero run too short, min
> 1200)
> Feb 17 10:16:00.40: [ 485]: --> [10:NO CARRIER]
> Feb 17 10:16:00.40: [ 485]: DELAY 75 ms
> Feb 17 10:16:00.48: [ 485]: <-- [9:AT+FTH=3\r]
> Feb 17 10:16:00.62: [ 485]: --> [7:CONNECT]
> Feb 17 10:16:00.62: [ 485]: <-- HDLC<3:FF C8 22>
> Feb 17 10:16:00.62: [ 485]: <-- data [3]
> Feb 17 10:16:00.62: [ 485]: <-- data [2]
> Feb 17 10:16:01.36: [ 485]: --> [2:OK]
> Feb 17 10:16:01.36: [ 485]: TRAINING failed
> Feb 17 10:16:01.36: [ 485]: <-- [9:AT+FRH=3\r]
> Feb 17 10:16:01.88: [ 485]: --> [7:CONNECT]
> Feb 17 10:16:03.68: [ 485]: --> HDLC<25:FF C0 C2 0C AC 1C 0C 8C AC 04
> 2C 9C 04 6C CC 04 04 04 04 04 04 04 04 4D 09>
> Feb 17 10:16:03.68: [ 485]: --> [2:OK]
> Feb 17 10:16:03.68: [ 485]: REMOTE TSI "36 94 510850"
> Feb 17 10:16:03.68: [ 485]: <-- [9:AT+FRH=3\r]
> Feb 17 10:16:03.71: [ 485]: --> [7:CONNECT]
> Feb 17 10:16:04.01: [ 485]: --> HDLC<9:FF C8 C1 00 71 1F 00 7D AE>
> Feb 17 10:16:04.01: [ 485]: --> [2:OK]
> Feb 17 10:16:04.01: [ 485]: REMOTE wants 7200 bit/s
> Feb 17 10:16:04.01: [ 485]: REMOTE wants page width 1728 pixels in 215
> mm
> Feb 17 10:16:04.01: [ 485]: REMOTE wants unlimited page length
> Feb 17 10:16:04.01: [ 485]: REMOTE wants 3.85 line/mm
> Feb 17 10:16:04.01: [ 485]: REMOTE wants 2-D MR
> Feb 17 10:16:04.01: [ 485]: RECV training at v.29 7200 bit/s
> Feb 17 10:16:04.01: [ 485]: <-- [10:AT+FRM=72\r]
> Feb 17 10:16:04.59: [ 485]: --> [7:CONNECT]
> Feb 17 10:16:06.12: [ 485]: RECV: TCF 1376 bytes, 0% non-zero, 1364
> zero-run
> Feb 17 10:16:06.12: [ 485]: --> [10:NO CARRIER]
> Feb 17 10:16:06.12: [ 485]: DELAY 75 ms
> Feb 17 10:16:06.20: [ 485]: <-- [9:AT+FTH=3\r]
> Feb 17 10:16:06.34: [ 485]: --> [7:CONNECT]
> Feb 17 10:16:06.34: [ 485]: <-- HDLC<3:FF C8 21>
> Feb 17 10:16:06.34: [ 485]: <-- data [3]
> Feb 17 10:16:06.34: [ 485]: <-- data [2]
> Feb 17 10:16:07.08: [ 485]: --> [2:OK]
> Feb 17 10:16:07.08: [ 485]: TRAINING succeeded
> Feb 17 10:16:07.08: [ 485]: MODEM input buffering enabled
> Feb 17 10:16:07.08: [ 485]: <-- [10:AT+FRM=72\r]
> Feb 17 10:16:07.91: [ 485]: --> [7:CONNECT]
> Feb 17 10:16:07.91: [ 485]: RECV: begin page
> Feb 17 10:16:34.41: [ 485]: RECV: 1149 total lines, 0 bad lines, 0
> consecutive bad lines
> Feb 17 10:16:34.41: [ 485]: RECV: end page
> Feb 17 10:16:34.41: [ 485]: --> [10:NO CARRIER]
> Feb 17 10:16:34.41: [ 485]: MODEM input buffering disabled
> Feb 17 10:16:34.41: [ 485]: <-- [9:AT+FRH=3\r]
> Feb 17 10:16:34.46: [ 485]: --> [7:CONNECT]
> Feb 17 10:16:35.65: [ 485]: --> HDLC<5:FF C8 F2 AC A0>
> Feb 17 10:16:35.65: [ 485]: --> [2:OK]
> Feb 17 10:16:35.65: [ 485]: RECV recv MPS (more pages, same document)
> Feb 17 10:16:35.65: [ 485]: <-- [9:AT+FTH=3\r]
> Feb 17 10:16:35.79: [ 485]: --> [7:CONNECT]
> Feb 17 10:16:35.79: [ 485]: <-- HDLC<3:FF C8 31>
> Feb 17 10:16:35.79: [ 485]: <-- data [3]
> Feb 17 10:16:35.79: [ 485]: <-- data [2]
> Feb 17 10:16:36.53: [ 485]: --> [2:OK]
> Feb 17 10:16:36.53: [ 485]: RECV send MCF (message confirmation)
> Feb 17 10:16:36.53: [ 485]: RECV FAX (00000044): from 36 94 510850,
> page 1 in 0:29, INF, 3.85 line/mm, 2-D MR
> Feb 17 10:16:36.53: [ 485]: MODEM input buffering enabled
> Feb 17 10:16:36.53: [ 485]: <-- [10:AT+FRM=72\r]
> Feb 17 10:16:42.53: [ 485]: --> [7:CONNECT]
> Feb 17 10:16:42.53: [ 485]: RECV: begin page
> Feb 17 10:17:10.16: [ 485]: RECV: 1144 total lines, 0 bad lines, 0
> consecutive bad lines
> Feb 17 10:17:10.16: [ 485]: RECV: end page
> Feb 17 10:17:10.16: [ 485]: --> [10:NO CARRIER]
> Feb 17 10:17:10.16: [ 485]: MODEM input buffering disabled
> Feb 17 10:17:10.16: [ 485]: <-- [9:AT+FRH=3\r]
> Feb 17 10:17:10.21: [ 485]: --> [7:CONNECT]
> Feb 17 10:17:11.40: [ 485]: --> HDLC<5:FF C8 F4 CC 66>
> Feb 17 10:17:11.40: [ 485]: --> [2:OK]
> Feb 17 10:17:11.40: [ 485]: RECV recv EOP (no more pages or documents)
> Feb 17 10:17:11.40: [ 485]: <-- [9:AT+FTH=3\r]
> Feb 17 10:17:11.55: [ 485]: --> [7:CONNECT]
> Feb 17 10:17:11.55: [ 485]: <-- HDLC<3:FF C8 31>
> Feb 17 10:17:11.55: [ 485]: <-- data [3]
> Feb 17 10:17:11.55: [ 485]: <-- data [2]
> Feb 17 10:17:12.29: [ 485]: --> [2:OK]
> Feb 17 10:17:12.29: [ 485]: RECV send MCF (message confirmation)
> Feb 17 10:17:12.29: [ 485]: RECV FAX (00000044): from 36 94 510850,
> page 2 in 0:36, INF, 3.85 line/mm, 2-D MR
> Feb 17 10:17:12.29: [ 485]: RECV FAX (00000044): recvq/fax00050.tif
> from 36 94 510850, route to <unspecified>, 2 pages in 1:25
> Feb 17 10:17:12.29: [ 485]: <-- [9:AT+FRH=3\r]
> Feb 17 10:17:12.80: [ 485]: --> [7:CONNECT]
> Feb 17 10:17:14.06: [ 485]: --> HDLC<5:FF C8 DF 59 6F>
> Feb 17 10:17:14.07: [ 485]: --> [2:OK]
> Feb 17 10:17:14.07: [ 485]: MODEM input buffering enabled
> Feb 17 10:17:14.07: [ 485]: RECV FAX: bin/faxrcvd "recvq/fax00050.tif"
> "modem" "00000044" ""
> Feb 17 10:17:14.73: [ 485]: RECV FAX: end
> Feb 17 10:17:14.73: [ 485]: SESSION END
> -------------- cut ---------------
>
> TIA and by., Sanya
>
>
> ps: please cc to my private box too.
>
>
> --
> ...Feher Sandor... mailto:fehers@freemail.hu http://w3.swi.hu/sfeher
>
