|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: Unspecified Phrase error (code 20)
Alan Sparks wrote:
> You should tell us what type of modem your using, on what type of system.
> -Alan
>
>
U.S. Robotics 33.6K external on Red Hat Linux 5.2
> -----Original Message-----
> From: Glen Batchelor <webmaster@allspec.com>
> To: flexfax@sgi.com <flexfax@sgi.com>
> Date: Tuesday, February 08, 2000 4:57 PM
> Subject: flexfax: Unspecified Phrase error (code 20)
>
> >Can anyone tell me why the remote is killing the transmission?
> >Also, after every fax, the modem hangs. I have to rerun "faxmodem cua1"
> >to wake it back up.
> >Any suggestions?
> >
> > Thanks,
> >
> > Ryengoth
> >
> >Feb 08 23:35:06.77: [25104]: <-- [15:ATE0V1Q0S0=0H0\r]
> >Feb 08 23:35:06.91: [25104]: --> [2:OK]
> >Feb 08 23:35:06.91: [25104]: <-- [21:ATS8=2S7=30&K3&D2&C1\r]
> >Feb 08 23:35:07.06: [25104]: --> [2:OK]
> >Feb 08 23:35:07.06: [25104]: <-- [14:AT+FCLASS=2.0\r]
> >Feb 08 23:35:07.20: [25104]: --> [2:OK]
> >Feb 08 23:35:07.20: [25104]: <-- [9:AT+FLO=2\r]
> >Feb 08 23:35:07.34: [25104]: --> [2:OK]
> >Feb 08 23:35:07.34: [25104]: <-- [9:AT+FPP=0\r]
> >Feb 08 23:35:07.48: [25104]: --> [2:OK]
> >Feb 08 23:35:07.48: [25104]: <-- [9:AT+FBO=0\r]
> >Feb 08 23:35:07.62: [25104]: --> [2:OK]
> >Feb 08 23:35:07.62: [25104]: <-- [10:AT+FCT=30\r]
> >Feb 08 23:35:07.76: [25104]: --> [2:OK]
> >Feb 08 23:35:07.76: [25104]: <-- [15:AT+FNR=1,1,1,1\r]
> >Feb 08 23:35:07.90: [25104]: --> [2:OK]
> >Feb 08 23:35:07.90: [25104]: <-- [9:AT+FIE=0\r]
> >Feb 08 23:35:08.04: [25104]: --> [2:OK]
> >Feb 08 23:35:08.04: [25104]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
> >Feb 08 23:35:08.19: [25104]: --> [2:OK]
> >Feb 08 23:35:08.19: [25104]: <-- [5:ATM0\r]
> >Feb 08 23:35:08.33: [25104]: --> [2:OK]
> >Feb 08 23:35:08.33: [25104]: <-- [14:AT+FCLASS=2.0\r]
> >Feb 08 23:35:08.57: [25104]: --> [2:OK]
> >Feb 08 23:35:08.57: [25104]: <-- [9:AT+FLO=2\r]
> >Feb 08 23:35:08.81: [25104]: --> [2:OK]
> >Feb 08 23:35:08.81: [25104]: <-- [9:AT+FPP=0\r]
> >Feb 08 23:35:09.05: [25104]: --> [2:OK]
> >Feb 08 23:35:09.05: [25104]: <-- [9:AT+FBO=0\r]
> >Feb 08 23:35:09.29: [25104]: --> [2:OK]
> >Feb 08 23:35:09.29: [25104]: <-- [10:AT+FCT=30\r]
> >Feb 08 23:35:09.53: [25104]: --> [2:OK]
> >Feb 08 23:35:09.53: [25104]: <-- [15:AT+FNR=1,1,1,1\r]
> >Feb 08 23:35:09.77: [25104]: --> [2:OK]
> >Feb 08 23:35:09.77: [25104]: <-- [9:AT+FIE=0\r]
> >Feb 08 23:35:10.01: [25104]: --> [2:OK]
> >Feb 08 23:35:10.01: [25104]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
> >Feb 08 23:35:10.26: [25104]: --> [2:OK]
> >Feb 08 23:35:10.26: [25104]: <-- [22:AT+FLI="NothingSetup"\r]
> >Feb 08 23:35:10.51: [25104]: --> [2:OK]
> >[chop alot of stuff]
> >Feb 08 23:35:41.19: [25104]: --> [2:OK]
> >Feb 08 23:35:41.19: [25104]: REMOTE HANGUP: Unspecified Transmit Phase B
> >error (code 20)
> >Feb 08 23:35:41.19: [25104]: SEND FAILED: Unspecified Transmit Phase B
> >error
> >Feb 08 23:35:41.19: [25104]: <-- [5:ATH0\r]
> >Feb 08 23:35:41.19: [25104]: --> [10:NO CARRIER]
> >Feb 08 23:35:41.19: [25104]: MODEM No carrier
> >Feb 08 23:35:41.22: [25104]: SESSION END
> >
