Re: flexfax: Any idea what this error is?

[Karl Denninger <karl@Denninger.Net>]

So that's a real no answer, not a "I answered the phone but didn't get what
I liked back".

Ok.

(The real question is, did I pay for that call.  If the line wasn't answered,
the answer to the question is no ;-)

The reason this becomes important is that I am attempting to flag error
conditions and prevent calling a "bad" machine again and again in a
fruitless attempt to deliver subsequent messages.  This is an automated
system and sends a LOT of faxes so being diagnostic about *why* something 
didn't work is important.

--
-- 
Karl Denninger (karl@denninger.net)  Web: http://childrens-justice.org
Isn't it time we started putting KIDS first?  See the above URL for
a plan to do exactly that!


On Wed, Feb 02, 2000 at 09:52:42PM +0000, Mark Wilson (P. Kay Associates Ltd.) wrote:
> Hi,
> 
> Like it says, No Answer after several attempts. Often happens when
> destination fax out of paper.
> 
> Best Regards,
> 
> Mark Wilson
> 
> P. Kay Associates Ltd.
> 
> 
> On Wed, 2 Feb 2000, Karl Denninger wrote:
> 
> > 
> > Any idea what this particular error means?
> > 
> > --
> > -- 
> > Karl Denninger (karl@denninger.net)  Web: http://childrens-justice.org
> > Isn't it time we started putting KIDS first?  See the above URL for
> > a plan to do exactly that!
> > 
> > 
> > 
> > Date: Wed, 2 Feb 2000 08:40:28 -0600 (CST)
> > From: Facsimile Agent <fax>
> > To: karl@denninger.net
> > Subject: facsimile job 1676 to xxx-xxx-xxxx failed
> > 
> > Your facsimile job to xxx-xxx-xxxx failed because:
> >     No answer (T.30 T1 timeout); too many attempts to dial
> > 
> >     ---- Transcript of session follows ----
> > 
> > Feb 02 08:38:43.68: [18037]: SESSION BEGIN 00002611 xxxxxxxxxx
> > Feb 02 08:38:43.68: [18037]: SEND FAX: JOB 1676 DEST xxx-xxx-xxxx COMMID 00002611
> > Feb 02 08:38:43.68: [18037]: DELAY 2600 ms
> > Feb 02 08:38:49.82: [18037]: DIAL ..............................
> > Feb 02 08:40:26.98: [18037]: REMOTE HANGUP: No answer (T.30 T1 timeout) (code 11)
> > Feb 02 08:40:26.98: [18037]: SEND FAILED: No answer (T.30 T1 timeout)
> > Feb 02 08:40:26.98: [18037]: SEND FAILED: No answer (T.30 T1 timeout); too many attempts to dial
> > Feb 02 08:40:28.12: [18037]: SESSION END
> > 
> >     ---- Unsent job status ----
> > 
> >    Destination: xxx-xxx-xxxx
> >          JobID: 1676
> >        GroupID: 1676
> >         Sender: karl
> >       Mailaddr: karl@denninger.net
> >         CommID: 00002611
> >          Modem: outbound
> > Submitted From: localhost.Denninger.Net
> >     Page Width: 215 (mm)
> >    Page Length: 279 (mm)
> >     Resolution: 98 (lpi)
> >         Status: No answer (T.30 T1 timeout); too many attempts to dial
> >        Dialogs: 0 (exchanges with remote device)
> >          Dials: 5 (consecutive failed calls to destination)
> >          Calls: 5 (total phone calls placed)
> >          Pages: 0 (pages transmitted)
> >       TotPages: 4 (total pages to transmit)
> >       Attempts: 0 (attempts to send current page)
> >         Dirnum: 0 (directory of next page to send)
> > 
> >     ---- Documents submitted for transmission ----
> > 
> > The following documents were submitted for transmission and are
> > available on the server for reuse until they are automatically
> > purged when this job is removed.  Documents may also be manually
> > removed using the faxrm command; consult faxrm(1) for information.
> > 
> > Filename                 Size Type
> > docq/doc3270.ps         52371 PostScript
> > docq/doc3271.ps          6223 PostScript
> > docq/doc3272.ps          8450 PostScript
> > 
> > ----- End forwarded message -----
> > 
>