|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: facsimile not received (fwd)
On Mon, 24 Jan 2000, Louis Bertrand wrote:
> Noisy line? Your modem appears to be retraining (changing parameters for
> better communication), and failing. Try a lower bit rate than 14400 or
Sorry... How do I do that...
> consult your modem manual to see if you can program safe defaults into the
> EEPROM. Also, try with a local modem (same building or neighbour).
The fax is in the next room... I can transmit to it, but I cant receive
anything...
So, it isn't a noisy line...
May you help me out on this... I'm getting crazy with the
configurations...
JP
>
> Regards
> --Louis <louis@bertrandtech.on.ca>
>
> Louis Bertrand http://www.bertrandtech.on.ca/
> Bertrand Technical Services, Bowmanville, ON, Canada
>
> OpenBSD: Secure by default. http://www.openbsd.org/
>
> On Mon, 24 Jan 2000, Jose Pedro Pereira wrote:
>
> >
> > I just get this message when I try to receive a Fax... May you help me
> > out...
> >
> > I have mandrake 6.1, hylafax-v4.0pl2 and a Zoom 14.4 VFX External modem...
> > My config.fax file looks as follows:
> >
> > CountryCode: 351
> > AreaCode: 21
> > FAXNumber: "+351 21 *******"
> > LongDistancePrefix: ""
> > InternationalPrefix: 00
> > DialStringRules: etc/dialrules
> > ServerTracing: 1
> > SessionTracing: 11
> > RecvFileMode: 0644
> > LogFileMode: 0644
> > DeviceMode: 0600
> > RingsBeforeAnswer: 3
> > SpeakerVolume: low
> > GettyArgs: "-h %l dx_%s"
> > LocalIdentifier: "SITAF S.A. from the Network Fax Server"
> > TagLineFont: etc/lutRS18.pcf
> > TagLineFormat: "From %%l|%c|Page %%p of %%t"
> > MaxRecvPages: 25
> > #
> > #
> > # Modem-related stuff: should reflect modem command interface
> > # and hardware connection/cabling (e.g. flow control).
> > #
> > ModemType: Class1 # use class 1 interface
> > ModemRate: 19200
> > ModemFlowControl: xonxoff
> > #
> > ModemNoFlowCmd: AT&K # disable flow control cmd
> > ModemHardFlowCmd: AT&K3 # hardware flow control cmd
> > ModemSoftFlowCmd: AT&K4 # software flow control cmd
> > ModemSetupDTRCmd: AT&D3 # setup so DTR drop resets modem
> > ModemSetupDCDCmd: AT&C1 # setup so DCD reflects carrier (or not)r1: AT&C1 # setup so DCD reflects carrier (or not)c1
> > AdaptiveAnswer: yes
> > AnswerRotary: "fax data"
> > ModemAnswerCmd: AT+FCLASS=1;A
> > ModemAnswerDataCmd: ATH+FCLASS=0;A
> > Class1RecvIdentTimer: 10000
> > ModemSetupAACmd: AT+FAA=0 # in case modem supports Class 2 also
> > #
> > ModemMfrQueryCmd: !Rockwell # no way to query modem
> > ModemModelQueryCmd: !RC32ACL # not always right
> > ModemRevQueryCmd: ATI3
> > #
> > ModemSendFillOrder: LSB2MSB
> > ModemRecvFillOrder: MSB2LSB
> >
> >
> >
> >
> >
> > ---------- Forwarded message ----------
> > Date: 24 Jan 2000 14:16:31 -0000
> > From: The HylaFAX Receive Agent <fax@mail.net.sitaf.pt>
> > To: FaxMaster@mail.net.sitaf.pt
> > Subject: facsimile not received
> >
> > An attempt to receive facsimile on fax failed because:
> >
> > COMREC received DCN
> >
> > ---- Transcript of session follows ----
> >
> > Jan 24 14:15:50.10: [ 759]: SESSION BEGIN 00000007 351218420031
> > Jan 24 14:15:50.10: [ 759]: <-- [14:AT+FCLASS=1;A\r]
> > Jan 24 14:15:55.55: [ 759]: --> [7:CONNECT]
> > Jan 24 14:15:55.55: [ 759]: ANSWER: FAX CONNECTION
> > Jan 24 14:15:55.55: [ 759]: RECV FAX: begin
> > Jan 24 14:15:57.15: [ 759]: --> [7:CONNECT]
> > Jan 24 14:15:57.63: [ 759]: --> [2:OK]
> > Jan 24 14:15:57.63: [ 759]: <-- [9:AT+FRH=3\r]
> > Jan 24 14:15:58.01: [ 759]: --> [7:CONNECT]
> > Jan 24 14:15:59.38: [ 759]: --> [2:OK]
> > Jan 24 14:15:59.38: [ 759]: REMOTE TSI "351218461211"
> > Jan 24 14:15:59.38: [ 759]: <-- [9:AT+FRH=3\r]
> > Jan 24 14:15:59.40: [ 759]: --> [7:CONNECT]
> > Jan 24 14:15:59.70: [ 759]: --> [2:OK]
> > Jan 24 14:15:59.70: [ 759]: REMOTE wants 14400 bit/s
> > Jan 24 14:15:59.70: [ 759]: REMOTE wants page width 1728 pixels in 215 mm
> > Jan 24 14:15:59.70: [ 759]: REMOTE wants unlimited page length
> > Jan 24 14:15:59.70: [ 759]: REMOTE wants 3.85 line/mm
> > Jan 24 14:15:59.70: [ 759]: REMOTE wants 2-D MR
> > Jan 24 14:15:59.70: [ 759]: RECV training at v.17 14400 bit/s
> > Jan 24 14:15:59.70: [ 759]: <-- [11:AT+FRM=145\r]
> > Jan 24 14:16:01.40: [ 759]: --> [7:CONNECT]
> > Jan 24 14:16:02.97: [ 759]: RECV: TCF 2785 bytes, 2% non-zero, 2702 zero-run
> > Jan 24 14:16:02.97: [ 759]: --> [10:NO CARRIER]
> > Jan 24 14:16:02.97: [ 759]: DELAY 75 ms
> > Jan 24 14:16:03.05: [ 759]: <-- [9:AT+FTH=3\r]
> > Jan 24 14:16:03.09: [ 759]: --> [7:CONNECT]
> > Jan 24 14:16:04.37: [ 759]: --> [2:OK]
> > Jan 24 14:16:04.37: [ 759]: TRAINING succeeded
> > Jan 24 14:16:04.37: [ 759]: <-- [11:AT+FRM=146\r]
> > Jan 24 14:16:05.04: [ 759]: --> [7:CONNECT]
> > Jan 24 14:16:05.04: [ 759]: RECV: begin page
> > Jan 24 14:16:26.50: [ 759]: RECV: 1463 total lines, 1346 bad lines, 124 consecutive bad lines
> > Jan 24 14:16:26.50: [ 759]: RECV: REJECT page quality, 7% good lines (95% required)
> > Jan 24 14:16:26.50: [ 759]: RECV: end page
> > Jan 24 14:16:26.50: [ 759]: --> [10:NO CARRIER]
> > Jan 24 14:16:26.50: [ 759]: <-- [9:AT+FRH=3\r]
> > Jan 24 14:16:26.85: [ 759]: --> [7:CONNECT]
> > Jan 24 14:16:27.65: [ 759]: --> [2:OK]
> > Jan 24 14:16:27.65: [ 759]: RECV recv EOP (no more pages or documents)
> > Jan 24 14:16:27.65: [ 759]: <-- [9:AT+FTH=3\r]
> > Jan 24 14:16:27.71: [ 759]: --> [7:CONNECT]
> > Jan 24 14:16:28.99: [ 759]: --> [2:OK]
> > Jan 24 14:16:28.99: [ 759]: RECV send RTN (retrain negative)
> > Jan 24 14:16:28.99: [ 759]: <-- [9:AT+FRH=3\r]
> > Jan 24 14:16:29.35: [ 759]: --> [7:CONNECT]
> > Jan 24 14:16:30.27: [ 759]: --> [2:OK]
> > Jan 24 14:16:30.27: [ 759]: RECV recv DCN
> > Jan 24 14:16:30.27: [ 759]: RECV FAX (00000007): recvq/fax00003.tif from 351218461211, route to <unspecified>, 0 pages in 0:35
> > Jan 24 14:16:30.27: [ 759]: RECV FAX: COMREC received DCN
> > Jan 24 14:16:30.27: [ 759]: <-- [9:AT+FTH=3\r]
> > Jan 24 14:16:30.33: [ 759]: --> [7:CONNECT]
> > Jan 24 14:16:31.61: [ 759]: --> [2:OK]
> > Jan 24 14:16:31.61: [ 759]: RECV FAX (00000007): session with 351218461211 terminated abnormally: COMREC received DCN
> > Jan 24 14:16:31.61: [ 759]: RECV FAX: bin/faxrcvd "recvq/fax00003.tif" "fax" "00000007" "COMREC received DCN"
> >
> >
> >
>
>
>
