Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: ModemSetVolumeCmd: "ATM2L3" doesn´twork



>From my experience, Hayes compatible usually means "mostly compatible". I
too have M2 and M3 available for my Hayes compatible modem, but they don't
do anything.

I would be suprised if Hylafax is doing anything to your strings other than
passing them to the modem. You really need to try a terminal program (or
even a chat script) to talk to the modem and see what works.


Ari


on 29/12/99 5:14 am, Ekkard Gerlach at SPS_Gerlach@online.de wrote:

> Nico Kadel-Garcia wrote:
>> 
>>> my config.ttyS1:
>>> 
>>> [...]
>>> #ModemSetVolumeCmd:     "ATM0 ATL0M1 ATL1M1 ATL2M1 ATL3M1"
>>> ModemSetVolumeCmd:
>>> "ATM2L3"
>>> #ModemEchoOffCmd:       ATE0            # disable command echo
>>> [...]
>>> 
>>> 1. ATM2L3 does not work ! Why ?
>> 
>> The M register is a binary: 0 for off, 1 for on. M2L3 will generate
>> an error code, as you can see if you use kermit or minicomm to
>> talk to the modem directly and try the command.
>> 
> My docu for hayes-compatible (like mine) modems says:
> M0 : Speaker always off
> M1 : Speaker on until connection established
> M2 : Speaker always on
> M3 : Speaker on until connection established but off during
> dialing
> 
> Does Hylafax not recognize M2 to M3 ? Wich command do I have to
> execute
> to reach modem behaviour like M2 ?
> 
> BTW: With minicom all M2 , M3 is recognized
> 
> 
> Ekkard
> 
> 



-------------------------->
ish group pty ltd
7 Darghan St Glebe 2037 Australia
phone +61 2 9660 1400   fax +61 2 9660 7400
email info@ish.com.au
PGP fingerprint 08 57 20 4B 80 69 59 E2  A9 BF 2D 48 C2 20 0C C8



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services