Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: faxaddmodem problem on Solaris 2.6
I have solved my problem!
The port monitor ttymon was running for /dev/cua/b port. I disabled the port,
and was able to
run faxaddmodem.
This is already documented in Solaris Guidance section in Server Setup and Basic
Configuration
Information posted on Hylafax website. Only I failed to notice this section
before.
Sudhir
Sudhir_Koka@tivoli.com on 12/07/99 05:52:53 PM
To: flexfax@sgi.com
cc: (bcc: Sudhir Koka/Tivoli Systems)
Subject: flexfax: faxaddmodem problem on Solaris 2.6
The faxaddmodem script fails during the hylafax installation with the
following error:
Probing for best speed to talk to modem:
38400/opt/local/fax/lib/faxaddmodem[808]: /tmp/addmodem6212: cannot open
19200/opt/local/fax/lib/faxaddmodem[808]: /tmp/addmodem6212: cannot open
9600/opt/local/fax/lib/faxaddmodem[808]: /tmp/addmodem6212: cannot open
4800/opt/local/fax/lib/faxaddmodem[808]: /tmp/addmodem6212: cannot open
2400/opt/local/fax/lib/faxaddmodem[808]: /tmp/addmodem6212: cannot open
1200/opt/local/fax/lib/faxaddmodem[808]: /tmp/addmodem6212: cannot open
Unable to deduce DTE-DCE speed; check that you are using the
correct device and/or that your modem is setup properly. If
all else fails, try the -s option to lock the speed.
I am using hylafax-v4.0p12 version under Solaris 2.6 platform with gcc 2.7.2 and
US Robotics V. Everything modem. I have configured /dev/cua/b serial
port . I am able to get the cu and tip commands working with /dev/cua/b device.
cu -l /dev/cua/b <phone no.> works fine. I am able to dial out.
I have run the faxsetup script. It has started hfaxd and faxq processes. But it
fails
in the faxaddmodem script with the above mentioned error. I tried to debug the
faxaddmodem script, and it seems like /dev/cua/b device is busy, and in
SendToModem function ondelay doesn;t create the temporary file
/tmp/addmodem6212. Any idea why /dev/cua/b device is busy?
The non-default server configuration parameters are:
CountryCode: 1
AreaCode: 408
FAXNumber: +14085011993
LongDistancePrefix: 1
InternationalPrefix: 011
DialStringRules: "etc/dialrules"
SessionTracing: 11
RingsBeforeAnswer: 1
SpeakerVolume: off
GettyArgs: "-h %l dx_%s"
LocalIdentifier:
ClocalAsRoot: yes
TagLineFont: etc/lutRS18.pcf
TagLineFormat: "From %%l|%c|Page %%p of %%t"
MaxRecvPages: 25