flexfax: incom. problem.Do anyone have Diamond SupraExpress 56e?

[marco <info@tucsoft.com>]

hylafax-4_0pl2-3rh5_i386.rpm, mandrake 6.1,  Diamond SupraExpress56e Pro

I allways can not receive fax. From one sender I get two different log
errors (why?):

Nov 15 01:42:45.75: [  552]: --> [3:ATA]
Nov 15 01:42:45.75: [  552]: -->
[10:NO CARRIER]
Nov 15 01:42:45.75: [  552]: ANSWER: Ring detected without
successful handshake


Nov 15 01:44:24.48: [  552]: RECV FAX: begin
Nov 15 01:47:24.48: [  552]:
REMOTE HANGUP: Unspecified Receive Phase B error (code 70)
Nov 15
01:47:24.48: [  552]: RECV FAX: Unspecified Receive Phase B error

Does anybody have the same modem and could send me his config.ttyS1 file?
If not can someone suggest me what I could try to make work mine which is
as follows?

thank you
marco

...
ModemType:		Class2		# use class 2 interface
ModemRate:
38400
ModemFlowControl:	rtscts		# default
#
ModemResetCmds:	AT&F2		# what
you want for a Supra
ModemNoFlowCmd:		AT&K		# disable flow control
cmd
ModemHardFlowCmd:	AT&K3		# hardware flow control cmd
ModemSoftFlowCmd:
AT&K4		# software flow control cmd
ModemSetupDTRCmd:	AT&D3		# DTR off
causes modem to reset
#ModemSetupDTRCmd:	AT&D2S25=1S38=0	# Dynalink 1414VE
needs this
ModemSetupDCDCmd:	AT&C1		# DCD follows carrier
ModemSetupAACmd:
AT+FAA=1+FCLASS=0 # enable in current class
#
ModemSendFillOrder:	LSB2MSB
# as expected
ModemRecvFillOrder:	MSB2LSB		# opposite of what makes
sense
#
ModemAnswerFaxBeginCmd:	"<19200><xon>"	# modem switches on fax
receive
#
# Caller ID configuration setup for Supra.
#
#QualifyCID:
etc/cid		# CID access control list file
#CIDNumber:		"NMBR = "	# pattern
string for phone number info
#CIDName:		"NAME = "	# pattern string for
identity info