flexfax: can not receive fax

[marco <mfoglia@vtx.ch>]

hylafax 4.xx (hylafax-4_0pl2-3rh5_i386.rpm), mandrake 6.1, 
Diamond SupraExpress56e Pro


Installing rpm I got the error "ghostscript font std is missing" 
in spite of the fact that I installed 
"ghostscript-5_50-2_i386.rpm" and 
"ghostscript-fonts-5_50-1_noarch.rpm".

I added this line (or similar) in /etc/initab: 
	2:2345 /usr/bin/faxgetty ttyS1
and when I reboot i find faxgetty in ktop 
(I think not in top nor ps x, why?)

 

I can send but not receive fax (tested with 3 distinct senders).

During faxaddmodem i got this errors:

1)...Hmm there does not appear to a fuser command on machine...
2)..probing for best speed..:38400 ok
  /bin/stty : standard input: unable to perform all requested 
  operations ...
 sleep 10; echo "hmm, something seem to be hung, check your 
 modem eh "; done

3)..Hmm this look like class2 modem 
   /bin/stty : standard input: unable to perform 
   all requested operations ...


Below is the last part of config.ttyS1 that I tried to modify 
only on line 4 (took off  "#")  and 1 line of 2 log files:

ModemType:		Class2		# use class 2 interface
ModemRate:		38400
ModemFlowControl:	rtscts		# default
ModemResetCmds:	AT&F2		# what you want for a Supra
ModemNoFlowCmd:		AT&K		# disable flow control cmd
ModemHardFlowCmd:	AT&K3		# hardware flow control cmd
ModemSoftFlowCmd:	AT&K4		# software flow control cmd
ModemSetupDTRCmd:	AT&D3		# DTR off causes modem to reset
#ModemSetupDTRCmd:AT&D2S25=1S38=0	# Dynalink 1414VE needs this
ModemSetupDCDCmd:	AT&C1		# DCD follows carrier
ModemSetupAACmd:	AT+FAA=1+FCLASS=0 # enable in current class
#
ModemSendFillOrder:	LSB2MSB	# as expected
ModemRecvFillOrder:	MSB2LSB	# opposite of what makes sense
#
ModemAnswerFaxBeginCmd:	"<19200><xon># modem switches on fax receive
#
# Caller ID configuration setup for Supra.
#
#QualifyCID:		etc/cid # CID access control list file
#CIDNumber:		"NMBR = "	# pattern string for phone number info
#CIDName:		"NAME = "	# pattern string for identity info


;;;;;;;;;;;;;;;;;;;; a line of log;;;;;;;;;;

Nov 05 14:14:02.85: [  597]: REMOTE HANGUP: Unspecified Receive Phase B
error (code 70)
;;;;;;;;;;;;;;;;,another log ;;;;;;;;;;;;;;;

Nov 05 14:09:42.32: [  597]: --> [10:NO CARRIER]
Nov 05 14:09:42.32: [  597]: ANSWER: Ring detected without successful
handshake


(