Re: FW: Will 4.1b3 or 4.1 solve "no response to MPS"?

To: kcornet@kimball.com (Kenneth Cornetet)
Subject: Re: FW: flexfax: Will 4.1b3 or 4.1 solve "no response to MPS"?
From: David Woolley <david@djwhome.demon.co.uk>
Cc: flexfax@sgi.com
Reply-To: flexfax@sgi.com
Date: Tue, 26 Oct 1999 08:02:10 +0100 (BST)

> Hylafax sends the "End of page, no more pages" command to the remote fax

It's End of procedure.

But this is not the problem in this thread, which was with more
pages same document.  It is possible to ignore missing EOP errors, 
providing you don't care whether the final page was received, but
you can only ignore MPS ones if you make a separate call for each
such page and don't care whether any page at all gets through.

Follow-Ups:
- Re: FW: Will 4.1b3 or 4.1 solve "no response to MPS"?
  - From: Giulio Orsero <giulioo@tiscalinet.it>

References:
- FW: Will 4.1b3 or 4.1 solve "no response to MPS"?
  - From: Kenneth Cornetet <kcornet@kimball.com>

Prev by Date: Permission Problem?
Next by Date: Re: Will 4.1b3 or 4.1 solve "no response to MPS"?
Prev by thread: FW: Will 4.1b3 or 4.1 solve "no response to MPS"?
Next by thread: Re: FW: Will 4.1b3 or 4.1 solve "no response to MPS"?
Index(es):
- Main
- Thread

Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services