Re: flexfax: faxes are sent only after running faxsetup

[Alexandre Nuernberg <berg@telesc.net.br>]

hi gary,

thanks for your help,

i've changed to the script rc that you sent, and its working now, but i 
have to make some modifications, and i would like of some explanations, 
because  i couldn't understand some parts.
what are the meaning of the two following lines?
ZYXEL='(0,1),(0-5),(0-2),(0-2),(0,1),(0),(0),(0-7)'
MULTI='(0-1),(0-5),(0-4),(0-2),(0),(0),(0),(0-7)'

         if $IS_ON fax && test -x $FAXQ; then
             killall -15 faxq
             killall -15 hfaxd
             $ECHO "HylaFAX:\c"
             $FAXQ; $ECHO " faxq\c"
             $HFAXD -i $FAXPORT -o 4557 -s $SNPPPORT
                 $ECHO " hfaxd (w/ compatibility & SNPP)\c"
             $FAXMODEM -c "$MULTI" ttyS1; $ECHO "faxmodem\c"
#            $FAXMODEM -c "$MULTI" cua/b; $ECHO " faxmodem\c"
             $ECHO "."

i've commented these lines:
#            if test $FAXQ_SERVER -eq 1 ; then
#               $FAXQ; $ECHO " faxq\c"
#            fi
#            if test $HFAXD_SERVER -eq 1 ; then
#               $HFAXD -i $FAXPORT
#            fi
#            $ECHO " hfaxd (without old protocol or SNPP support)\c"
#           $ECHO "."
         fi
         ;;

and i changed:
             $FAXMODEM -c "$MULTI" ttyS1; $ECHO "faxmodem\c"
#            $FAXMODEM -c "$MULTI" cua/b; $ECHO " faxmodem\c"
because i use ttySx devices.
in this case, i specified a modem on ttyS1, but if i have more than one 
modem, how can i do to the sript send the comands for all devices on ttySx?

thanks,



At 14:13 14/10/99 -0500, Gary Mills wrote:
> >after running faxsetup, all the faxes that were in the queue  were sent,
> >and the new faxes are sent imediatelly.
> >then if i reboot the server or if i turn the modem off, the problem begins
> >again.
>
>If you have a send-only configuration, that is not running faxgetty,
>you need to run faxmodem each time you start hfaxd.  I've modified
>the hylafax rc script to do this...
>
>IS_ON=/etc/chkconfig            # NB: chkconfig is IRIX-specific
>FAXQ=$SBIN/faxq
>HFAXD=$LIBEXEC/hfaxd
>FAXQUIT=$SBIN/faxquit
>FAXMODEM=$SBIN/faxmodem
>KILLALL=/sbin/killall
>FAXPORT=hylafax                 # designated port for new protocol
>SNPPPORT=444                    # official port for SNPP
>ZYXEL='(0,1),(0-5),(0-2),(0-2),(0,1),(0),(0),(0-7)'
>MULTI='(0-1),(0-5),(0-4),(0-2),(0),(0),(0),(0-7)'
>
>...
>
>         if $IS_ON fax && test -x $FAXQ; then
>             killall -15 faxq
>             killall -15 hfaxd
>             $ECHO "HylaFAX:\c"
>             $FAXQ; $ECHO " faxq\c"
>             $HFAXD -i $FAXPORT -o 4557 -s $SNPPPORT
>                 $ECHO " hfaxd (w/ compatibility & SNPP)\c"
>             $FAXMODEM -c "$MULTI" cua/b; $ECHO " faxmodem\c"
>             $ECHO "."
>         fi
>
>
>--
>-Gary Mills-    -Unix Support-    -U of M Academic Computing and Networking-

--
Alexandre Nuernberg
Gerencia de Servicos TELESC-Net
TELESC - TELE CENTRO SUL SA
(01448)231-2706
berg@telesc.net.br
aberg@altavista.net