|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
I: facsimile job 60 to 0734683224 requeued WHY THIS ERROR ???? before worked
- To: <flexfax@sgi.com>
- Subject: flexfax: I: facsimile job 60 to 0734683224 requeued WHY THIS ERROR ???? before worked
- From: "Luca Domenella" <luca@satori.it>
- Reply-To: "Luca Domenella" <luca@satori.it>
- Date: Wed, 22 Sep 1999 10:20:05 +0200
Hello all,
i got this kind of error since 2 days, and i can not understand why !!! i
do not changed nothing in
my configuration. whasup ????
this is my error log file
i desperatly need help !!!
TIA,
*-------------------------------------------------------------*--------*
| Luca Domenella Email: luca@satori.it | even |
| Responsabile RETI (Network Manager) Office: +39 735 782409 | little |
| Satori Network Solutions Fax: +39 735 786360 | get |
| http: // www.satori.it Mobile: +39 348 3516239 | Mads |
*-------------------------------------------------------------*--------*
----- Original Message -----
From: Facsimile Agent <fax@server.satori.it>
To: <luca@satori.it>
Sent: Wednesday, September 22, 1999 10:15 AM
Subject: facsimile job 60 to 0734683224 requeued
> Your facsimile job to 0734683224 was not sent because:
> No response to MPS or EOP repeated 3 tries
>
> The job will be retried at 10:20.
>
> ---- Transcript of session follows ----
>
> Sep 22 10:13:33.00: [ 991]: SESSION BEGIN 00000145 397350734683224
> Sep 22 10:13:33.00: [ 991]: SEND FAX: JOB 60 DEST 0734683224 COMMID
00000145
> Sep 22 10:13:33.00: [ 991]: DELAY 2600 ms
> Sep 22 10:13:35.60: [ 991]: <-- [15:ATE0V1Q0S0=0H0\r]
> Sep 22 10:13:35.62: [ 991]: --> [2:OK]
> Sep 22 10:13:35.62: [ 991]: <-- [12:ATS8=2S7=60\r]
> Sep 22 10:13:35.64: [ 991]: --> [2:OK]
> Sep 22 10:13:35.64: [ 991]: <-- [12:AT+FCLASS=1\r]
> Sep 22 10:13:35.66: [ 991]: --> [2:OK]
> Sep 22 10:13:35.66: [ 991]: <-- [5:ATM0\r]
> Sep 22 10:13:35.67: [ 991]: --> [2:OK]
> Sep 22 10:13:35.67: [ 991]: <-- [12:AT+FCLASS=1\r]
> Sep 22 10:13:35.79: [ 991]: --> [2:OK]
> Sep 22 10:13:35.79: [ 991]: DIAL 0734683224
> Sep 22 10:13:35.79: [ 991]: <-- [17:ATX3DT0734683224\r]
> Sep 22 10:13:56.19: [ 991]: --> [7:CONNECT]
> Sep 22 10:13:57.44: [ 991]: --> [2:OK]
> Sep 22 10:13:57.44: [ 991]: <-- [9:AT+FRH=3\r]
> Sep 22 10:13:57.46: [ 991]: --> [7:CONNECT]
> Sep 22 10:13:58.16: [ 991]: --> [2:OK]
> Sep 22 10:13:58.16: [ 991]: REMOTE CSI "0734 683224"
> Sep 22 10:13:58.16: [ 991]: <-- [9:AT+FRH=3\r]
> Sep 22 10:13:58.18: [ 991]: --> [7:CONNECT]
> Sep 22 10:13:58.42: [ 991]: --> [2:OK]
> Sep 22 10:13:58.42: [ 991]: REMOTE best rate 9600 bit/s
> Sep 22 10:13:58.42: [ 991]: REMOTE max page width 1728 pixels in 215 mm
> Sep 22 10:13:58.42: [ 991]: REMOTE max unlimited page length
> Sep 22 10:13:58.42: [ 991]: REMOTE best vres 7.7 line/mm
> Sep 22 10:13:58.42: [ 991]: REMOTE best format 2-D MR
> Sep 22 10:13:58.42: [ 991]: REMOTE supports T.30 Annex A, ECM
> Sep 22 10:13:58.42: [ 991]: REMOTE best 20 ms, 10 ms/scanline
> Sep 22 10:13:58.42: [ 991]: USE 9600 bit/s
> Sep 22 10:13:58.42: [ 991]: USE 20 ms, 10 ms/scanline
> Sep 22 10:13:58.42: [ 991]: SEND file "docq/doc77.ps;41"
> Sep 22 10:13:58.42: [ 991]: USE page width 1728 pixels in 215 mm
> Sep 22 10:13:58.42: [ 991]: USE unlimited page length
> Sep 22 10:13:58.42: [ 991]: USE 7.7 line/mm
> Sep 22 10:13:58.42: [ 991]: USE 2-D MR
> Sep 22 10:13:58.42: [ 991]: SEND training at v.29 9600 bit/s
> Sep 22 10:13:58.42: [ 991]: <-- [9:AT+FTH=3\r]
> Sep 22 10:13:58.47: [ 991]: --> [7:CONNECT]
> Sep 22 10:14:00.26: [ 991]: --> [7:CONNECT]
> Sep 22 10:14:00.69: [ 991]: --> [2:OK]
> Sep 22 10:14:00.69: [ 991]: DELAY 75 ms
> Sep 22 10:14:00.77: [ 991]: <-- [10:AT+FTM=96\r]
> Sep 22 10:14:00.83: [ 991]: --> [7:CONNECT]
> Sep 22 10:14:02.78: [ 991]: --> [2:OK]
> Sep 22 10:14:02.78: [ 991]: <-- [9:AT+FRH=3\r]
> Sep 22 10:14:03.68: [ 991]: --> [7:CONNECT]
> Sep 22 10:14:04.59: [ 991]: --> [2:OK]
> Sep 22 10:14:04.59: [ 991]: TRAINING succeeded
> Sep 22 10:14:04.59: [ 991]: <-- [10:AT+FTM=96\r]
> Sep 22 10:14:04.65: [ 991]: --> [7:CONNECT]
> Sep 22 10:14:04.65: [ 991]: SEND begin page
> Sep 22 10:14:18.63: [ 991]: SENT 27499 bytes of data
> Sep 22 10:14:32.61: [ 991]: SENT 27388 bytes of data
> Sep 22 10:14:46.58: [ 991]: SENT 27361 bytes of data
> Sep 22 10:15:00.56: [ 991]: SENT 27409 bytes of data
> Sep 22 10:15:14.53: [ 991]: SENT 23593 bytes of data
> Sep 22 10:15:14.53: [ 991]: SEND 2D RTC
> Sep 22 10:15:14.53: [ 991]: SEND end page
> Sep 22 10:15:25.06: [ 991]: --> [2:]
> Sep 22 10:15:25.06: [ 991]: --> [2:OK]
> Sep 22 10:15:25.06: [ 991]: DELAY 95 ms
> Sep 22 10:15:25.16: [ 991]: SEND send EOP (no more pages or documents)
> Sep 22 10:15:25.16: [ 991]: <-- [9:AT+FTH=3\r]
> Sep 22 10:15:25.21: [ 991]: --> [7:CONNECT]
> Sep 22 10:15:26.53: [ 991]: --> [2:OK]
> Sep 22 10:15:26.53: [ 991]: <-- [9:AT+FRH=3\r]
> Sep 22 10:15:29.63: [ 991]: --> [0:]
> Sep 22 10:15:29.63: [ 991]: MODEM <Empty line>
> Sep 22 10:15:29.68: [ 991]: --> [2:OK]
> Sep 22 10:15:29.68: [ 991]: SEND send EOP (no more pages or documents)
> Sep 22 10:15:29.68: [ 991]: <-- [9:AT+FTH=3\r]
> Sep 22 10:15:29.73: [ 991]: --> [7:CONNECT]
> Sep 22 10:15:31.05: [ 991]: --> [2:OK]
> Sep 22 10:15:31.05: [ 991]: <-- [9:AT+FRH=3\r]
> Sep 22 10:15:34.15: [ 991]: --> [0:]
> Sep 22 10:15:34.15: [ 991]: MODEM <Empty line>
> Sep 22 10:15:34.20: [ 991]: --> [2:OK]
> Sep 22 10:15:34.20: [ 991]: SEND send EOP (no more pages or documents)
> Sep 22 10:15:34.20: [ 991]: <-- [9:AT+FTH=3\r]
> Sep 22 10:15:34.25: [ 991]: --> [7:CONNECT]
> Sep 22 10:15:35.57: [ 991]: --> [2:OK]
> Sep 22 10:15:35.57: [ 991]: <-- [9:AT+FRH=3\r]
> Sep 22 10:15:38.67: [ 991]: --> [0:]
> Sep 22 10:15:38.67: [ 991]: MODEM <Empty line>
> Sep 22 10:15:38.72: [ 991]: --> [2:OK]
> Sep 22 10:15:38.72: [ 991]: <-- [9:AT+FTH=3\r]
> Sep 22 10:15:38.77: [ 991]: --> [7:CONNECT]
> Sep 22 10:15:40.08: [ 991]: --> [2:OK]
> Sep 22 10:15:40.08: [ 991]: <-- [5:ATH0\r]
> Sep 22 10:15:42.01: [ 991]: --> [2:OK]
> Sep 22 10:15:42.01: [ 991]: SESSION END
