|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: problem with faxsetup on HP-UX 10.20
Hi,
At 09:29 PM 8/25/99 +0200, Carlo Meme' wrote:
>Hello,
>
>I'm trying to install HylaFax 4.0pl2 on an HP 9000 D370 system using the
>binary
>distribution. The modem I would like to use is a MT1432BA previously
>connected
>to a Linux box where HylaFax is running since early 1998.
>
>When I run faxsetup everythings seems to work until the faxaddmodem tryes to
>detect my
>MT1432BA, actually connected on /dev/cul1p0 (built-in serial port): at this
>point
>( "Probing for best speed to talk to modem: 38400" ) faxsetup hangs.
>The modem is cabled to the port and is turned on , since I can connect to
>the modem with
>kermit without any problem.
>
>Can anybody give me any suggestions ?
>Thank you very much !
Run faxaddmodem with the '-s' parameter.
Perhaps also try temporarily putting a getty on the line to keep the line
parameters set to sensible values.
- Robert
