Re: flexfax: Phase B Error (Code 20)

[Matthias Reich <rei@hagos.de>]

DAVID ARNOLD wrote:
>=20
> And it's not a Sportster.
>=20
> Linux 2.2.9, HylaFAX-v4.0pl2, Netcomm Roadster II connected to the /dev=
/ttyE[0-4] interfaces.  The
> problem is printing from a windows application (such as IE) to the fax =
machine (Canon Fax 410).
>=20
> Always get the Phase B Error (code 20) .. I use the HP Laserjet 4/4M Pl=
us PS, the other PS printers
> we've tried all get a busy signal when dialling the office fax machine =
(or is that the problem??)
I=B4ve experienced here that some fax machines just do not like to work
with some modems

>=20
> The job actually reports success, but has 0 pages sent.  We can send a =
postscript job from linux to
> the fax no probs at all.
Are use using WHFC on the Windows side ?? ftp.sqi.com/fax/contrib or
like that
Get the WHFC and check again=20

hope it helps
/matthias

>=20
> Here's a log -
>=20
> Jul 28 16:47:46.24: [11716]: SESSION BEGIN 00000102 6103094822793
> Jul 28 16:47:46.24: [11716]: SEND FAX: JOB 57 DEST 0,94822793 COMMID 00=
000102
> Jul 28 16:47:46.24: [11716]: DELAY 2600 ms
> Jul 28 16:47:48.84: [11716]: <-- [15:ATE0V1Q0S0=3D0H0\r]
> Jul 28 16:47:48.86: [11716]: --> [2:OK]
> Jul 28 16:47:48.86: [11716]: <-- [21:ATS8=3D2S7=3D60&K3&D3&C1\r]
> Jul 28 16:47:48.89: [11716]: --> [2:OK]
> Jul 28 16:47:48.89: [11716]: <-- [12:AT+FCLASS=3D2\r]
> Jul 28 16:47:48.91: [11716]: --> [2:OK]
> Jul 28 16:47:48.91: [11716]: <-- [10:AT+FTBC=3D0\r]
> Jul 28 16:47:48.93: [11716]: --> [2:OK]
> Jul 28 16:47:48.93: [11716]: <-- [10:AT+FBOR=3D0\r]
> Jul 28 16:47:48.95: [11716]: --> [2:OK]
> Jul 28 16:47:48.95: [11716]: <-- [13:AT+FPHCTO=3D30\r]
> Jul 28 16:47:48.97: [11716]: --> [2:OK]
> Jul 28 16:47:48.97: [11716]: <-- [24:AT+FDCC=3D1,5,2,2,0,0,0,0\r]
> Jul 28 16:47:48.99: [11716]: --> [2:OK]
> Jul 28 16:47:48.99: [11716]: <-- [7:ATL2M1\r]
> Jul 28 16:47:49.01: [11716]: --> [2:OK]
> Jul 28 16:47:49.01: [11716]: <-- [12:AT+FCLASS=3D2\r]
> Jul 28 16:47:49.13: [11716]: --> [2:OK]
> Jul 28 16:47:49.13: [11716]: <-- [10:AT+FTBC=3D0\r]
> Jul 28 16:47:49.25: [11716]: --> [2:OK]
> Jul 28 16:47:49.25: [11716]: <-- [10:AT+FBOR=3D0\r]
> Jul 28 16:47:49.37: [11716]: --> [2:OK]
> Jul 28 16:47:49.37: [11716]: <-- [13:AT+FPHCTO=3D30\r]
> Jul 28 16:47:49.49: [11716]: --> [2:OK]
> Jul 28 16:47:49.49: [11716]: <-- [24:AT+FDCC=3D1,5,2,2,0,0,0,0\r]
> Jul 28 16:47:49.61: [11716]: --> [2:OK]
> Jul 28 16:47:49.61: [11716]: <-- [25:AT+FLID=3D"+6103094822793"\r]
> Jul 28 16:47:49.74: [11716]: --> [2:OK]
> Jul 28 16:47:49.74: [11716]: DIAL 0,94822793
> Jul 28 16:47:49.74: [11716]: <-- [15:ATDT0,94822793\r]
> Jul 28 16:48:10.70: [11716]: --> [5:+FCON]
> Jul 28 16:48:13.37: [11716]: --> [29:+FCSI: "       613 9482 2793"]
> Jul 28 16:48:13.37: [11716]: REMOTE CSI "613 9482 2793"
> Jul 28 16:48:13.63: [11716]: --> [22:+FDIS: 1,3,0,2,1,0,0,2]
> Jul 28 16:48:13.74: [11716]: --> [2:OK]
> Jul 28 16:48:13.74: [11716]: REMOTE best rate 9600 bit/s
> Jul 28 16:48:13.74: [11716]: REMOTE max page width 1728 pixels in 215 m=
m
> Jul 28 16:48:13.74: [11716]: REMOTE max unlimited page length
> Jul 28 16:48:13.74: [11716]: REMOTE best vres 7.7 line/mm
> Jul 28 16:48:13.74: [11716]: REMOTE best format 2-D MR
> Jul 28 16:48:13.74: [11716]: REMOTE best 10 ms, 5 ms/scanline
> Jul 28 16:48:13.74: [11716]: USE 9600 bit/s
> Jul 28 16:48:13.74: [11716]: USE 10 ms, 5 ms/scanline
> Jul 28 16:48:13.74: [11716]: <-- [5:ATH0\r]
> Jul 28 16:48:14.00: [11716]: --> [9:+FHNG: 20]
> Jul 28 16:48:14.00: [11716]: REMOTE HANGUP: Unspecified Transmit Phase =
B error (code 20)
> Jul 28 16:48:14.59: [11716]: --> [2:OK]
> Jul 28 16:48:14.59: [11716]: SESSION END
>=20
> Cheers,
>=20
> dga
--=20
HAGOS eG                 phone: +49 711 7880592
Matthias Reich             fax: +49 711 7880599
Industriestr. 62           web: http://www.hagos.de
D-70565 Stuttgart         mail: rei@hagos.de
Germany