Re: flexfax: ZyXEL 2864 ID

[col.lugo@t-online.de (Christian Otto-Lange)]

Christoph Scheeder wrote:
> 
> I would suggest the folowing ( works fine for us, same modem, other
> linux)
> take minicom and initialise the modem with the the commands give in
> config.ttyS1
> and write that to eeprom of the modem, then change the
> soft-reset-command in
> config.ttyS1 to load that configuration.
> 
> and second there is an error in your /etc/inittab:
> 
> Christian Otto-Lange schrieb:
> ........
> 
> > # getty-programs for the normal runlevels
> > # <id>:<runlevels>:<action>:<process>
> > # The "id" field  MUST be the same as the last characters of the device (after "tty").
> 
> 
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> This is not a joke....
> 
> > # modem getty.
> > # mo:23:respawn:/usr/sbin/mgetty -s 38400 modem
> >
> > # fax getty (hylafax)
> > mo:23:respawn:/usr/lib/fax/faxgetty /dev/ttyS1
>   ^^
> this has to be "S1"
> 

Hello Christoph,

Thanks for this.
Using the AT commands from config.ttyS1
did'nt work. It seems, that 2864 I <>
2864 ID. Unfortunatealy i have no manual
or SW for it. The tools (for the wrong
OS) from ftp:zyxel.com replies ' no
ZyXEL TA found' :-(

Gruss 

Chris