|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: Received Fax Not Readable
On Fri, 25 Jun 1999, Chua Choon Hian wrote:
> Hi,
>
> I have just added a Multi-tech MT3334ZDX modem, all faxes received on this
> modem are not readable. I have attched a sample in this mail.
>
> Does anyone have similar encounter before?
Multitech defaults to xon/xoff flow control on faxes regardless
to the flow control set on the modem.
Try
ModemAnswerFaxBeginCmd: "<xon>" # switch flow control
or try adding these
Class2NFLOCmd: AT+FLO=0 # Class 2: no flow control
Class2SFLOCmd: AT+FLO=1 # Class 2: software flow control
Class2HFLOCmd: AT+FLO=2 # Class 2: hardware flow control
The latter may break sending faxes.
On MT2834ZDX I get
....
Feb 21 13:02:26.88: [ 9472]: --> [7:CONNECT]
Feb 21 13:02:26.88: [ 9472]: SEND wait for XON
Feb 21 13:02:32.23: [ 9472]: --> [1:^X]
Feb 21 13:02:36.89: [ 9472]: MODEM TIMEOUT: waiting for XON before sending page
data
....
>
> Regards,
> Choon Hian
>
--
Tim Rice Multitalents (707) 887-1469 (voice)
tim@trr.metro.net
