flexfax: USRobotics RPI modem

[Doug <bbuster@autobahn.mb.ca>]

When my modem answers the call  my OH led comes on and my RD led flashes
2 times then nothing happens.  The following is the logs for an incoming
fax (in.log) and an outbound fax... obviously none were successfull

[root@localhost log]# cat in.log
Jun 07 13:32:30.65: [  315]: SESSION BEGIN 00000002 12042046638098
Jun 07 13:32:30.65: [  315]: <-- [4:ATA\r]
Jun 07 13:35:30.65: [  315]: ANSWER: Ring detected without successful
handshake
Jun 07 13:35:30.65: [  315]: SESSION END
[root@localhost log]# cat out.log
Jun 07 13:43:03.33: [  532]: SESSION BEGIN 00000005 12046943015
Jun 07 13:43:03.33: [  532]: SEND FAX: JOB 1 DEST 6943015 COMMID
00000005
Jun 07 13:43:03.33: [  532]: DELAY 2600 ms
Jun 07 13:43:05.94: [  532]: <-- [15:ATE0V1Q0S0=0H0\r]
Jun 07 13:43:05.95: [  532]: --> [2:OK]
Jun 07 13:43:05.95: [  532]: <-- [21:ATS8=2S7=60&K3&D3&C1\r]
Jun 07 13:43:05.97: [  532]: --> [2:OK]
Jun 07 13:43:05.97: [  532]: <-- [12:AT+FCLASS=1\r]
Jun 07 13:43:05.98: [  532]: --> [2:OK]
Jun 07 13:43:05.98: [  532]: <-- [9:AT+FAA=0\r]
Jun 07 13:43:05.99: [  532]: --> [2:OK]
Jun 07 13:43:05.99: [  532]: <-- [5:ATM0\r]
Jun 07 13:43:06.00: [  532]: --> [2:OK]
Jun 07 13:43:06.00: [  532]: <-- [12:AT+FCLASS=1\r]
Jun 07 13:43:06.20: [  532]: --> [2:OK]
Jun 07 13:43:06.21: [  532]: DIAL 6943015
Jun 07 13:43:06.21: [  532]: <-- [12:ATDT6943015\r]
Jun 07 13:46:06.21: [  532]: SEND FAILED: Unknown problem (check modem
power)
Jun 07 13:46:06.21: [  532]: <-- [5:ATH0\r]
Jun 07 13:46:07.40: [  532]: --> [2:OK]
Jun 07 13:46:07.40: [  532]: SESSION END
[root@localhost log]#

Using USR Sportster SI (this is a RPI modem, I am almost certain?) on
ttyS0 can't get HylaFAX to work.  I am using faxgetty to handle incoming
calls but am not concerned about disconnecting none fax calls (all the
calls on that line are fax - if not who cares, shouldn't be calling) The
only reason for faxgetty is because I think that is the only way to rec
faxes w/ HylaFAX. <- is this true?

Is this a work around?
Use HylaFAX to send faxes and efax to recieve?  Efax works great on this
modem but the GUI front end (Gfax) is not set up for sending with
Efax.   The only reason I want to use HylaFAX is becuse it interfaces
and does file conversions better.