|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: WHFC and Windows client questions
You have to set up the viewer program in the WHFC system settings.
NT comes with a program to view tiff (fax) files. (wangimg.exe)
You also have to share you faxin ("/var/spool/fax/recvq") directory on your
Linux machine (using SAMBA).
The "Program and argument for..." in the WHFC system setting would be
something like this:
C:\Program Files\Windows NT\Accessories\ImageVue\wangimg.exe
"//your_hostname/your_sharename_recvq/%s"
Make sure the SAMBA share works.
Hope this helps.
-----Oorspronkelijk bericht-----
Van: Chua Choon Hian <choonhian@hotmail.com>
Aan: dave@nic.com <dave@nic.com>; flexfax@sgi.com <flexfax@sgi.com>
Datum: maandag 31 mei 1999 7:32
Onderwerp: Re: flexfax: WHFC and Windows client questions
>Hi All,
>
>I am also facing the same problem with WHFC. In addition, WHFC cannot have
>each intended reciepient's address place in the cover page when a fax
>broadcast is done using the phonebook. Does anyone know of any workaround
>to this?
>
>Thanks!
>
>>From: Dave Wreski <dave@nic.com>
>>To: HylaFAX <flexfax@sgi.com>
>>Subject: flexfax: WHFC and Windows client questions
>>Date: Fri, 28 May 1999 21:30:20 -0400 (EDT)
>>
>>
>>Hi all. I managed to get hylafax to work with Linux and my USR sportster
>>finally, and now I've set up WHFC on my NT 4.0 workstation, and I can
>>successfully view the rec'd queue, but cannot view faxes.
>>
>>I understand there's a faxview program, but apparently it's X based?
>>
>>Basically, I'm setting up hylafax for a small office of NT machines, where
>>they really has no concept of anything except who the fax is from, when it
>>was received, and who it's for. Is there a simple program that can
>>provide this information, as well as view it?
>>
>>I saw a reference to a perl cgi script that wrapped the faxes into html.
>>Does anyone know where that is?
>>
>>Does WHFC support the hfaxd protocol to copy the fax to the local machine?
>>
>>Reading the FAQ, I see there's a RECVFMT string that can be set to
>>configure the format of the output on the recvq directory. The man page
>>makes no such reference. Can someone explain how this works?
>>
>>Thanks much,
>>Dave Wreski
>>
>>
>>
>
>
>______________________________________________________
>Get Your Private, Free Email at http://www.hotmail.com
>
