|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: Is there a solution to the "No response to MPS or EOP" problem?
I have the same problem with my 3Com US Robotics 56K Voice Faxmodem. I tried
every configuration I found on the list, and none of them were a solution. My
server is working with only an old Rockwell card working at 28.800. The worst
problem is that I can't buy any of the recomended modems in the list
"www.hylafax.org/modems.html".
If the 3Com modem is not working, perhaps it shouldn't be in the list.
Good luck, Joaquin.
"Swoboda, Stefan (S.P.)" wrote:
> Hi there,
>
> I cannot offer a solution but I share the frustration of Phil since I can
> reproduce this
> exact problem with my setup:
>
> Hylafax 4.0pl2 binary distribution included in SuSE Linux 6.0 (Kernel
> 2.0.36)
> 3Com US Robotics 56K Voice Faxmodem
>
> This problem occurs reproducibly on certain analog fax machines. Even more
> frustrating
> is the fact that I did a cross check with the efax package. That worked ok
> !!!
>
> So either this is a Hylafax bug or a driver problem. In either case it is
> sure that it can be
> done since efax can do it. My config.ttyS0 is basically based on the USR20
> template from
> the config dirctory of the distribution with a small modification to get
> across my PBX.
>
> Any help or comment is greatly appreciated.
>
> ****************************************************************************
> ************
> Two examples of affected fax machines:
>
> Siemens FAX 940
> T Fax 382L
>
> ****************************************************************************
> *************
> Transcript of failing fax transmissions:
>
> Facsimile transmitted since 04/29/99 23:25:
>
> Sender Pages Time Pg/min Errs TypRate TypData
> stefan.swoboda@iteam.de 9 10:06 0.9 5 14400 1-D MR
> ---------------------------------------------------------------------
> Total 9 10:06 0.9 5
>
> Facsimile transmitted since last week:
>
> Sender Pages Time Pg/min Errs TypRate TypData
> root@silverwolf.iteam.de 8 2:54 2.8 0 9600 1-D MR
> stefan.swoboda@iteam.de 12 10:53 1.1 5 14400 1-D MR
> ----------------------------------------------------------------------
> Total 20 13:47 1.5 5
>
> Facsimile received since 04/29/99 23:25:
>
> Sender Pages Time Pg/min Errs TypRate TypData
> +49 2236 604 820 3 1:04 2.8 0 14400 1-D MR
> -----------------------------------------------------------
> Total 3 1:04 2.8 0
>
> Facsimile received since last week:
>
> Sender Pages Time Pg/min Errs TypRate TypData
> +49 211 43 50 653 6 1:37 3.7 0 14400 1-D MR
> +49 2236 604 820 3 1:04 2.8 0 14400 1-D MR
> ------------------------------------------------------------
> Total 9 2:41 3.4 0
>
> Report failed calls and associated session logs:
>
> To: stefan.swoboda@i Date: 04/30/99 20:25
> Error: Communication failure during Phase B/C
>
> ---- Transcript of session follows ----
>
> Apr 30 20:25:09.51: [ 1392]: SESSION BEGIN 00000021 492236604820
> Apr 30 20:25:09.52: [ 1392]: SEND FAX: JOB 15 DEST 02236604820 COMMID
> 00000021
> Apr 30 20:25:09.52: [ 1392]: MODEM set DTR OFF
> Apr 30 20:25:09.52: [ 1392]: DELAY 2600 ms
> Apr 30 20:25:12.12: [ 1392]: MODEM set DTR ON
> Apr 30 20:25:12.12: [ 1392]: MODEM set baud rate: 19200 baud, input flow
> RTS/CTS, output flow RTS/CTS
> Apr 30 20:25:12.12: [ 1392]: MODEM flush i/o
> Apr 30 20:25:12.12: [ 1392]: <-- [17:ATE0V1Q0X3S0=0H0\r]
> Apr 30 20:25:12.27: [ 1392]: --> [2:OK]
> Apr 30 20:25:12.27: [ 1392]: <-- [32:ATS8=2S7=60&H1&I0&R2S13=0&D2&C1\r]
> Apr 30 20:25:12.42: [ 1392]: --> [2:OK]
> Apr 30 20:25:12.42: [ 1392]: <-- [14:AT+FCLASS=2.0\r]
> Apr 30 20:25:12.56: [ 1392]: --> [2:OK]
> Apr 30 20:25:12.56: [ 1392]: <-- [9:AT+FLO=2\r]
> Apr 30 20:25:12.70: [ 1392]: --> [2:OK]
> Apr 30 20:25:12.70: [ 1392]: <-- [9:AT+FPP=0\r]
> Apr 30 20:25:12.84: [ 1392]: --> [2:OK]
> Apr 30 20:25:12.84: [ 1392]: <-- [9:AT+FBO=0\r]
> Apr 30 20:25:12.98: [ 1392]: --> [2:OK]
> Apr 30 20:25:12.98: [ 1392]: <-- [10:AT+FCT=30\r]
> Apr 30 20:25:13.12: [ 1392]: --> [2:OK]
> Apr 30 20:25:13.12: [ 1392]: <-- [15:AT+FNR=1,1,1,1\r]
> Apr 30 20:25:13.26: [ 1392]: --> [2:OK]
> Apr 30 20:25:13.26: [ 1392]: <-- [9:AT+FIE=0\r]
> Apr 30 20:25:13.40: [ 1392]: --> [2:OK]
> Apr 30 20:25:13.40: [ 1392]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
> Apr 30 20:25:13.55: [ 1392]: --> [2:OK]
> Apr 30 20:25:13.55: [ 1392]: <-- [5:ATM0\r]
> Apr 30 20:25:13.69: [ 1392]: --> [2:OK]
> Apr 30 20:25:13.69: [ 1392]: MODEM input buffering enabled
> Apr 30 20:25:13.69: [ 1392]: <-- [14:AT+FCLASS=2.0\r]
> Apr 30 20:25:13.93: [ 1392]: --> [2:OK]
> Apr 30 20:25:13.93: [ 1392]: <-- [9:AT+FLO=2\r]
> Apr 30 20:25:14.17: [ 1392]: --> [2:OK]
> Apr 30 20:25:14.17: [ 1392]: <-- [9:AT+FPP=0\r]
> Apr 30 20:25:14.41: [ 1392]: --> [2:OK]
> Apr 30 20:25:14.41: [ 1392]: <-- [9:AT+FBO=0\r]
> Apr 30 20:25:14.65: [ 1392]: --> [2:OK]
> Apr 30 20:25:14.65: [ 1392]: <-- [10:AT+FCT=30\r]
> Apr 30 20:25:14.89: [ 1392]: --> [2:OK]
> Apr 30 20:25:14.89: [ 1392]: <-- [15:AT+FNR=1,1,1,1\r]
> Apr 30 20:25:15.13: [ 1392]: --> [2:OK]
> Apr 30 20:25:15.13: [ 1392]: <-- [9:AT+FIE=0\r]
> Apr 30 20:25:15.37: [ 1392]: --> [2:OK]
> Apr 30 20:25:15.37: [ 1392]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
> Apr 30 20:25:15.62: [ 1392]: --> [2:OK]
> Apr 30 20:25:15.62: [ 1392]: <-- [28:AT+FLI="HylaFax@silverwolf"\r]
> Apr 30 20:25:15.87: [ 1392]: --> [2:OK]
> Apr 30 20:25:15.87: [ 1392]: DIAL 02236604820
> Apr 30 20:25:15.87: [ 1392]: <-- [17:ATDT002236604820\r]
> Apr 30 20:25:27.82: [ 1392]: --> [4:+FCO]
> Apr 30 20:25:30.52: [ 1392]: --> [19:+FNF:y^V^¿ ^S^P^E^V^ÍÀÐø^À^A]
> Apr 30 20:25:30.52: [ 1392]: REMOTE NSF "y^V^¿ ^S^P^E^V^ÍÀÐø^À^A"
> Apr 30 20:25:30.52: [ 1392]: --> [27:+FCI:" +49 2236 604 820"]
> Apr 30 20:25:30.52: [ 1392]: REMOTE CSI "+49 2236 604 820"
> Apr 30 20:25:30.52: [ 1392]: --> [20:+FIS:1,5,0,2,1,0,0,4]
> Apr 30 20:25:30.52: [ 1392]: --> [2:OK]
> Apr 30 20:25:30.52: [ 1392]: REMOTE best rate 14400 bit/s
> Apr 30 20:25:30.52: [ 1392]: REMOTE max page width 1728 pixels in 215 mm
> Apr 30 20:25:30.52: [ 1392]: REMOTE max unlimited page length
> Apr 30 20:25:30.52: [ 1392]: REMOTE best vres 7.7 line/mm
> Apr 30 20:25:30.52: [ 1392]: REMOTE best format 2-D MR
> Apr 30 20:25:30.52: [ 1392]: REMOTE best 20 ms, 10 ms/scanline
> Apr 30 20:25:30.52: [ 1392]: USE 14400 bit/s
> Apr 30 20:25:30.52: [ 1392]: USE 20 ms, 10 ms/scanline
> Apr 30 20:25:30.52: [ 1392]: SEND file "docq/doc25.ps;00"
> Apr 30 20:25:30.52: [ 1392]: USE page width 1728 pixels in 215 mm
> Apr 30 20:25:30.52: [ 1392]: USE unlimited page length
> Apr 30 20:25:30.52: [ 1392]: USE 3.85 line/mm
> Apr 30 20:25:30.52: [ 1392]: USE 1-D MR
> Apr 30 20:25:30.52: [ 1392]: <-- [23:AT+FIS=0,5,0,2,0,0,0,4\r]
> Apr 30 20:25:30.77: [ 1392]: --> [2:OK]
> Apr 30 20:25:30.77: [ 1392]: <-- [7:AT+FDT\r]
> Apr 30 20:25:31.05: [ 1392]: --> [20:+FCS:0,5,0,2,0,0,0,4]
> Apr 30 20:25:38.02: [ 1392]: --> [7:CONNECT]
> Apr 30 20:25:38.02: [ 1392]: SEND begin page
> Apr 30 20:25:57.96: [ 1392]: SENT 24433 bytes of data
> D 1D RTC
> Apr 30 20:25:57.96: [ 1392]: SEND end page
> Apr 30 20:25:57.96: [ 1392]: SEND send MPS (more pages, same document)
> Apr 30 20:26:14.11: [ 1392]: --> [5:ERROR]
> Apr 30 20:26:14.11: [ 1392]: SEND recv RTN (retrain negative)
> Apr 30 20:26:14.11: [ 1392]: <-- [7:AT+FDT\r]
> Apr 30 20:26:14.24: [ 1392]: --> [2:OK]
> Apr 30 20:29:14.24: [ 1392]: MODEM TIMEOUT: reading line from modem
> Apr 30 20:29:14.24: [ 1392]: MODEM <Timeout>
> Apr 30 20:29:14.24: [ 1392]: <-- [7:AT+FKS\r]
> Apr 30 20:29:14.48: [ 1392]: --> [2:OK]
> Apr 30 20:29:14.48: [ 1392]: <-- [5:ATH0\r]
> Apr 30 20:29:14.72: [ 1392]: --> [2:OK]
> Apr 30 20:29:14.72: [ 1392]: MODEM set DTR OFF
> Apr 30 20:29:14.72: [ 1392]: SESSION END
>
> To: stefan.swoboda@i Date: 04/30/99 21:17
> Error: No response to MPS repeated 3 times
>
> ---- Transcript of session follows ----
>
> Apr 30 21:17:11.24: [ 1921]: SESSION BEGIN 00000029 492236604820
> Apr 30 21:17:11.24: [ 1921]: SEND FAX: JOB 21 DEST 02236604820 COMMID
> 00000029
> Apr 30 21:17:11.24: [ 1921]: MODEM set DTR OFF
> Apr 30 21:17:11.24: [ 1921]: DELAY 2600 ms
> Apr 30 21:17:13.84: [ 1921]: MODEM set DTR ON
> Apr 30 21:17:13.84: [ 1921]: MODEM set baud rate: 19200 baud, input flow
> RTS/CTS, output flow RTS/CTS
> Apr 30 21:17:13.84: [ 1921]: MODEM flush i/o
> Apr 30 21:17:13.84: [ 1921]: <-- [17:ATE0V1Q0X3S0=0H0\r]
> Apr 30 21:17:13.99: [ 1921]: --> [2:OK]
> Apr 30 21:17:13.99: [ 1921]: <-- [32:ATS8=2S7=60&H1&I0&R2S13=0&D2&C1\r]
> Apr 30 21:17:14.14: [ 1921]: --> [2:OK]
> Apr 30 21:17:14.14: [ 1921]: <-- [14:AT+FCLASS=2.0\r]
> Apr 30 21:17:14.28: [ 1921]: --> [2:OK]
> Apr 30 21:17:14.28: [ 1921]: <-- [9:AT+FLO=2\r]
> Apr 30 21:17:14.42: [ 1921]: --> [2:OK]
> Apr 30 21:17:14.42: [ 1921]: <-- [9:AT+FPP=0\r]
> Apr 30 21:17:14.56: [ 1921]: --> [2:OK]
> Apr 30 21:17:14.56: [ 1921]: <-- [9:AT+FBO=0\r]
> Apr 30 21:17:14.70: [ 1921]: --> [2:OK]
> Apr 30 21:17:14.70: [ 1921]: <-- [10:AT+FCT=30\r]
> Apr 30 21:17:14.84: [ 1921]: --> [2:OK]
> Apr 30 21:17:14.84: [ 1921]: <-- [15:AT+FNR=1,1,1,1\r]
> Apr 30 21:17:14.98: [ 1921]: --> [2:OK]
> Apr 30 21:17:14.98: [ 1921]: <-- [9:AT+FIE=0\r]
> Apr 30 21:17:15.12: [ 1921]: --> [2:OK]
> Apr 30 21:17:15.12: [ 1921]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
> Apr 30 21:17:15.27: [ 1921]: --> [2:OK]
> Apr 30 21:17:15.27: [ 1921]: <-- [5:ATM0\r]
> Apr 30 21:17:15.41: [ 1921]: --> [2:OK]
> Apr 30 21:17:15.41: [ 1921]: MODEM input buffering enabled
> Apr 30 21:17:15.41: [ 1921]: <-- [14:AT+FCLASS=2.0\r]
> Apr 30 21:17:15.65: [ 1921]: --> [2:OK]
> Apr 30 21:17:15.65: [ 1921]: <-- [9:AT+FLO=2\r]
> Apr 30 21:17:15.89: [ 1921]: --> [2:OK]
> Apr 30 21:17:15.89: [ 1921]: <-- [9:AT+FPP=0\r]
> Apr 30 21:17:16.13: [ 1921]: --> [2:OK]
> Apr 30 21:17:16.13: [ 1921]: <-- [9:AT+FBO=0\r]
> Apr 30 21:17:16.37: [ 1921]: --> [2:OK]
> Apr 30 21:17:16.37: [ 1921]: <-- [10:AT+FCT=30\r]
> Apr 30 21:17:16.61: [ 1921]: --> [2:OK]
> Apr 30 21:17:16.61: [ 1921]: <-- [15:AT+FNR=1,1,1,1\r]
> Apr 30 21:17:16.85: [ 1921]: --> [2:OK]
> Apr 30 21:17:16.85: [ 1921]: <-- [9:AT+FIE=0\r]
> Apr 30 21:17:17.09: [ 1921]: --> [2:OK]
> Apr 30 21:17:17.09: [ 1921]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
> Apr 30 21:17:17.34: [ 1921]: --> [2:OK]
> Apr 30 21:17:17.34: [ 1921]: <-- [28:AT+FLI="HylaFax@silverwolf"\r]
> Apr 30 21:17:17.59: [ 1921]: --> [2:OK]
> Apr 30 21:17:17.59: [ 1921]: DIAL 02236604820
> Apr 30 21:17:17.59: [ 1921]: <-- [17:ATDT002236604820\r]
> Apr 30 21:17:29.59: [ 1921]: --> [4:+FCO]
> Apr 30 21:17:32.28: [ 1921]: --> [19:+FNF:y^V^¿ ^S^P^E^V^ÍÀÐø^À^A]
> Apr 30 21:17:32.28: [ 1921]: REMOTE NSF "y^V^¿ ^S^P^E^V^ÍÀÐø^À^A"
> Apr 30 21:17:32.28: [ 1921]: --> [27:+FCI:" +49 2236 604 820"]
> Apr 30 21:17:32.28: [ 1921]: REMOTE CSI "+49 2236 604 820"
> Apr 30 21:17:32.28: [ 1921]: --> [20:+FIS:1,5,0,2,1,0,0,4]
> Apr 30 21:17:32.28: [ 1921]: --> [2:OK]
> Apr 30 21:17:32.28: [ 1921]: REMOTE best rate 14400 bit/s
> Apr 30 21:17:32.28: [ 1921]: REMOTE max page width 1728 pixels in 215 mm
> Apr 30 21:17:32.28: [ 1921]: REMOTE max unlimited page length
> Apr 30 21:17:32.28: [ 1921]: REMOTE best vres 7.7 line/mm
> Apr 30 21:17:32.28: [ 1921]: REMOTE best format 2-D MR
> Apr 30 21:17:32.28: [ 1921]: REMOTE best 20 ms, 10 ms/scanline
> Apr 30 21:17:32.28: [ 1921]: USE 14400 bit/s
> Apr 30 21:17:32.28: [ 1921]: USE 20 ms, 10 ms/scanline
> Apr 30 21:17:32.28: [ 1921]: SEND file "docq/doc37.ps;00"
> Apr 30 21:17:32.28: [ 1921]: USE page width 1728 pixels in 215 mm
> Apr 30 21:17:32.28: [ 1921]: USE unlimited page length
> Apr 30 21:17:32.28: [ 1921]: USE 3.85 line/mm
> Apr 30 21:17:32.28: [ 1921]: USE 1-D MR
> Apr 30 21:17:32.28: [ 1921]: <-- [23:AT+FIS=0,5,0,2,0,0,0,4\r]
> Apr 30 21:17:32.53: [ 1921]: --> [2:OK]
> Apr 30 21:17:32.53: [ 1921]: <-- [7:AT+FDT\r]
> Apr 30 21:17:32.81: [ 1921]: --> [20:+FCS:0,5,0,2,0,0,0,4]
> Apr 30 21:17:39.78: [ 1921]: --> [7:CONNECT]
> Apr 30 21:17:39.78: [ 1921]: SEND begin page
> Apr 30 21:17:59.72: [ 1921]: SENT 24431 bytes of data
> D RTC
> Apr 30 21:17:59.72: [ 1921]: SEND end page
> Apr 30 21:17:59.72: [ 1921]: SEND send MPS (more pages, same document)
> Apr 30 21:18:21.10: [ 1921]: --> [7:+FHS:52]
> Apr 30 21:18:21.10: [ 1921]: REMOTE HANGUP: No response to MPS repeated 3
> times (code 52)
> Apr 30 21:18:21.10: [ 1921]: <-- [5:ATH0\r]
> Apr 30 21:18:21.22: [ 1921]: --> [2:OK]
> Apr 30 21:18:21.22: [ 1921]: MODEM set DTR OFF
> Apr 30 21:18:21.22: [ 1921]: SESSION END
>
> To: stefan.swoboda@i Date: 04/30/99 21:22
> Error: No response to MPS repeated 3 times
>
> ---- Transcript of session follows ----
>
> Apr 30 21:22:08.97: [ 2007]: SESSION BEGIN 00000031 49211452776
> Apr 30 21:22:08.98: [ 2007]: SEND FAX: JOB 23 DEST 452776 COMMID 00000031
> Apr 30 21:22:08.98: [ 2007]: MODEM set DTR OFF
> Apr 30 21:22:08.98: [ 2007]: DELAY 2600 ms
> Apr 30 21:22:11.58: [ 2007]: MODEM set DTR ON
> Apr 30 21:22:11.58: [ 2007]: MODEM set baud rate: 19200 baud, input flow
> RTS/CTS, output flow RTS/CTS
> Apr 30 21:22:11.58: [ 2007]: MODEM flush i/o
> Apr 30 21:22:11.58: [ 2007]: <-- [17:ATE0V1Q0X3S0=0H0\r]
> Apr 30 21:22:11.73: [ 2007]: --> [2:OK]
> Apr 30 21:22:11.73: [ 2007]: <-- [32:ATS8=2S7=60&H1&I0&R2S13=0&D2&C1\r]
> Apr 30 21:22:11.88: [ 2007]: --> [2:OK]
> Apr 30 21:22:11.88: [ 2007]: <-- [14:AT+FCLASS=2.0\r]
> Apr 30 21:22:12.02: [ 2007]: --> [2:OK]
> Apr 30 21:22:12.02: [ 2007]: <-- [9:AT+FLO=2\r]
> Apr 30 21:22:12.16: [ 2007]: --> [2:OK]
> Apr 30 21:22:12.16: [ 2007]: <-- [9:AT+FPP=0\r]
> Apr 30 21:22:12.30: [ 2007]: --> [2:OK]
> Apr 30 21:22:12.30: [ 2007]: <-- [9:AT+FBO=0\r]
> Apr 30 21:22:12.44: [ 2007]: --> [2:OK]
> Apr 30 21:22:12.44: [ 2007]: <-- [10:AT+FCT=30\r]
> Apr 30 21:22:12.58: [ 2007]: --> [2:OK]
> Apr 30 21:22:12.58: [ 2007]: <-- [15:AT+FNR=1,1,1,1\r]
> Apr 30 21:22:12.72: [ 2007]: --> [2:OK]
> Apr 30 21:22:12.72: [ 2007]: <-- [9:AT+FIE=0\r]
> Apr 30 21:22:12.86: [ 2007]: --> [2:OK]
> Apr 30 21:22:12.86: [ 2007]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
> Apr 30 21:22:13.01: [ 2007]: --> [2:OK]
> Apr 30 21:22:13.01: [ 2007]: <-- [5:ATM0\r]
> Apr 30 21:22:13.15: [ 2007]: --> [2:OK]
> Apr 30 21:22:13.15: [ 2007]: MODEM input buffering enabled
> Apr 30 21:22:13.15: [ 2007]: <-- [14:AT+FCLASS=2.0\r]
> Apr 30 21:22:13.39: [ 2007]: --> [2:OK]
> Apr 30 21:22:13.39: [ 2007]: <-- [9:AT+FLO=2\r]
> Apr 30 21:22:13.63: [ 2007]: --> [2:OK]
> Apr 30 21:22:13.63: [ 2007]: <-- [9:AT+FPP=0\r]
> Apr 30 21:22:13.87: [ 2007]: --> [2:OK]
> Apr 30 21:22:13.87: [ 2007]: <-- [9:AT+FBO=0\r]
> Apr 30 21:22:14.11: [ 2007]: --> [2:OK]
> Apr 30 21:22:14.11: [ 2007]: <-- [10:AT+FCT=30\r]
> Apr 30 21:22:14.35: [ 2007]: --> [2:OK]
> Apr 30 21:22:14.35: [ 2007]: <-- [15:AT+FNR=1,1,1,1\r]
> Apr 30 21:22:14.59: [ 2007]: --> [2:OK]
> Apr 30 21:22:14.59: [ 2007]: <-- [9:AT+FIE=0\r]
> Apr 30 21:22:14.83: [ 2007]: --> [2:OK]
> Apr 30 21:22:14.83: [ 2007]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
> Apr 30 21:22:15.08: [ 2007]: --> [2:OK]
> Apr 30 21:22:15.08: [ 2007]: <-- [28:AT+FLI="HylaFax@silverwolf"\r]
> Apr 30 21:22:15.33: [ 2007]: --> [2:OK]
> Apr 30 21:22:15.33: [ 2007]: DIAL 452776
> Apr 30 21:22:15.33: [ 2007]: <-- [12:ATDT0452776\r]
> Apr 30 21:22:27.68: [ 2007]: --> [4:+FCO]
> Apr 30 21:22:30.65: [ 2007]: --> [24:+FNF:
> ^B^H^DI!^TRwo^?^?^?^?^?^?^B^B^P]
> Apr 30 21:22:30.65: [ 2007]: REMOTE NSF "
> ^B^H^DI!^TRwo^?^?^?^?^?^?^B^B^P"
> Apr 30 21:22:30.65: [ 2007]: --> [27:+FCI:" +49 211 452776"]
> Apr 30 21:22:30.65: [ 2007]: REMOTE CSI "+49 211 452776"
> Apr 30 21:22:30.65: [ 2007]: --> [20:+FIS:1,3,0,2,0,0,0,4]
> Apr 30 21:22:30.65: [ 2007]: --> [2:OK]
> Apr 30 21:22:30.65: [ 2007]: REMOTE best rate 9600 bit/s
> Apr 30 21:22:30.65: [ 2007]: REMOTE max page width 1728 pixels in 215 mm
> Apr 30 21:22:30.65: [ 2007]: REMOTE max unlimited page length
> Apr 30 21:22:30.65: [ 2007]: REMOTE best vres 7.7 line/mm
> Apr 30 21:22:30.65: [ 2007]: REMOTE best format 1-D MR
> Apr 30 21:22:30.65: [ 2007]: REMOTE best 20 ms, 10 ms/scanline
> Apr 30 21:22:30.65: [ 2007]: USE 9600 bit/s
> Apr 30 21:22:30.65: [ 2007]: USE 20 ms, 10 ms/scanline
> Apr 30 21:22:30.65: [ 2007]: SEND file "docq/doc41.ps;00"
> Apr 30 21:22:30.65: [ 2007]: USE page width 1728 pixels in 215 mm
> Apr 30 21:22:30.65: [ 2007]: USE unlimited page length
> Apr 30 21:22:30.65: [ 2007]: USE 3.85 line/mm
> Apr 30 21:22:30.65: [ 2007]: USE 1-D MR
> Apr 30 21:22:30.65: [ 2007]: <-- [23:AT+FIS=0,3,0,2,0,0,0,4\r]
> Apr 30 21:22:30.90: [ 2007]: --> [2:OK]
> Apr 30 21:22:30.90: [ 2007]: <-- [7:AT+FDT\r]
> Apr 30 21:22:31.18: [ 2007]: --> [20:+FCS:0,3,0,2,0,0,0,4]
> Apr 30 21:22:37.07: [ 2007]: --> [7:CONNECT]
> Apr 30 21:22:37.07: [ 2007]: SEND begin page
> Apr 30 21:23:01.19: [ 2007]: SENT 24432 bytes of data
> Apr 30 21:23:01.19: [ 2007]: SEND 1D RTC
> 30 21:23:01.19: [ 2007]: SEND end page
> Apr 30 21:23:01.19: [ 2007]: SEND send MPS (more pages, same document)
> Apr 30 21:23:23.42: [ 2007]: --> [7:+FHS:52]
> Apr 30 21:23:23.42: [ 2007]: REMOTE HANGUP: No response to MPS repeated 3
> times (code 52)
> Apr 30 21:23:23.42: [ 2007]: <-- [5:ATH0\r]
> Apr 30 21:23:23.55: [ 2007]: --> [2:OK]
> Apr 30 21:23:23.55: [ 2007]: MODEM set DTR OFF
> Apr 30 21:23:23.55: [ 2007]: SESSION END
>
> To: stefan.swoboda@i Date: 04/30/99 23:05
> Error: No response to MPS repeated 3 times
>
> ---- Transcript of session follows ----
>
> Apr 30 23:05:07.99: [ 2269]: SESSION BEGIN 00000033 49211452776
> Apr 30 23:05:08.00: [ 2269]: SEND FAX: JOB 24 DEST 452776 COMMID 00000033
> Apr 30 23:05:08.00: [ 2269]: MODEM set DTR OFF
> Apr 30 23:05:08.00: [ 2269]: DELAY 2600 ms
> Apr 30 23:05:10.60: [ 2269]: MODEM set DTR ON
> Apr 30 23:05:10.60: [ 2269]: MODEM set baud rate: 19200 baud, input flow
> RTS/CTS, output flow RTS/CTS
> Apr 30 23:05:10.60: [ 2269]: MODEM flush i/o
> Apr 30 23:05:10.60: [ 2269]: <-- [17:ATE0V1Q0X3S0=0H0\r]
> Apr 30 23:05:10.75: [ 2269]: --> [2:OK]
> Apr 30 23:05:10.75: [ 2269]: <-- [32:ATS8=2S7=60&H1&I0&R2S13=0&D2&C1\r]
> Apr 30 23:05:10.90: [ 2269]: --> [2:OK]
> Apr 30 23:05:10.90: [ 2269]: <-- [14:AT+FCLASS=2.0\r]
> Apr 30 23:05:11.04: [ 2269]: --> [2:OK]
> Apr 30 23:05:11.04: [ 2269]: <-- [9:AT+FLO=2\r]
> Apr 30 23:05:11.18: [ 2269]: --> [2:OK]
> Apr 30 23:05:11.18: [ 2269]: <-- [9:AT+FPP=0\r]
> Apr 30 23:05:11.32: [ 2269]: --> [2:OK]
> Apr 30 23:05:11.32: [ 2269]: <-- [9:AT+FBO=0\r]
> Apr 30 23:05:11.46: [ 2269]: --> [2:OK]
> Apr 30 23:05:11.46: [ 2269]: <-- [10:AT+FCT=30\r]
> Apr 30 23:05:11.60: [ 2269]: --> [2:OK]
> Apr 30 23:05:11.60: [ 2269]: <-- [15:AT+FNR=1,1,1,1\r]
> Apr 30 23:05:11.74: [ 2269]: --> [2:OK]
> Apr 30 23:05:11.74: [ 2269]: <-- [9:AT+FIE=0\r]
> Apr 30 23:05:11.88: [ 2269]: --> [2:OK]
> Apr 30 23:05:11.88: [ 2269]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
> Apr 30 23:05:12.03: [ 2269]: --> [2:OK]
> Apr 30 23:05:12.03: [ 2269]: <-- [5:ATM0\r]
> Apr 30 23:05:12.17: [ 2269]: --> [2:OK]
> Apr 30 23:05:12.17: [ 2269]: MODEM input buffering enabled
> Apr 30 23:05:12.17: [ 2269]: <-- [14:AT+FCLASS=2.0\r]
> Apr 30 23:05:12.41: [ 2269]: --> [2:OK]
> Apr 30 23:05:12.41: [ 2269]: <-- [9:AT+FLO=2\r]
> Apr 30 23:05:12.65: [ 2269]: --> [2:OK]
> Apr 30 23:05:12.65: [ 2269]: <-- [9:AT+FPP=0\r]
> Apr 30 23:05:12.89: [ 2269]: --> [2:OK]
> Apr 30 23:05:12.89: [ 2269]: <-- [9:AT+FBO=0\r]
> Apr 30 23:05:13.13: [ 2269]: --> [2:OK]
> Apr 30 23:05:13.13: [ 2269]: <-- [10:AT+FCT=30\r]
> Apr 30 23:05:13.37: [ 2269]: --> [2:OK]
> Apr 30 23:05:13.37: [ 2269]: <-- [15:AT+FNR=1,1,1,1\r]
> Apr 30 23:05:13.61: [ 2269]: --> [2:OK]
> Apr 30 23:05:13.61: [ 2269]: <-- [9:AT+FIE=0\r]
> Apr 30 23:05:13.85: [ 2269]: --> [2:OK]
> Apr 30 23:05:13.85: [ 2269]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
> Apr 30 23:05:14.10: [ 2269]: --> [2:OK]
> Apr 30 23:05:14.10: [ 2269]: <-- [28:AT+FLI="HylaFax@silverwolf"\r]
> Apr 30 23:05:14.35: [ 2269]: --> [2:OK]
> Apr 30 23:05:14.35: [ 2269]: DIAL 452776
> Apr 30 23:05:14.35: [ 2269]: <-- [12:ATDT0452776\r]
> Apr 30 23:05:26.67: [ 2269]: --> [4:+FCO]
> Apr 30 23:05:29.63: [ 2269]: --> [24:+FNF:
> ^B^H^DI!^TRwo^?^?^?^?^?^?^B^B^P]
> Apr 30 23:05:29.63: [ 2269]: REMOTE NSF "
> ^B^H^DI!^TRwo^?^?^?^?^?^?^B^B^P"
> Apr 30 23:05:29.63: [ 2269]: --> [27:+FCI:" +49 211 452776"]
> Apr 30 23:05:29.63: [ 2269]: REMOTE CSI "+49 211 452776"
> Apr 30 23:05:29.63: [ 2269]: --> [20:+FIS:1,3,0,2,0,0,0,4]
> Apr 30 23:05:29.63: [ 2269]: --> [2:OK]
> Apr 30 23:05:29.63: [ 2269]: REMOTE best rate 9600 bit/s
> Apr 30 23:05:29.63: [ 2269]: REMOTE max page width 1728 pixels in 215 mm
> Apr 30 23:05:29.63: [ 2269]: REMOTE max unlimited page length
> Apr 30 23:05:29.63: [ 2269]: REMOTE best vres 7.7 line/mm
> Apr 30 23:05:29.63: [ 2269]: REMOTE best format 1-D MR
> Apr 30 23:05:29.63: [ 2269]: REMOTE best 20 ms, 10 ms/scanline
> Apr 30 23:05:29.63: [ 2269]: USE 9600 bit/s
> Apr 30 23:05:29.63: [ 2269]: USE 20 ms, 10 ms/scanline
> Apr 30 23:05:29.63: [ 2269]: SEND file "docq/doc43.ps;00"
> Apr 30 23:05:29.63: [ 2269]: USE page width 1728 pixels in 215 mm
> Apr 30 23:05:29.63: [ 2269]: USE unlimited page length
> Apr 30 23:05:29.63: [ 2269]: USE 3.85 line/mm
> Apr 30 23:05:29.63: [ 2269]: USE 1-D MR
> Apr 30 23:05:29.63: [ 2269]: <-- [23:AT+FIS=0,3,0,2,0,0,0,4\r]
> Apr 30 23:05:29.88: [ 2269]: --> [2:OK]
> Apr 30 23:05:29.88: [ 2269]: <-- [7:AT+FDT\r]
> Apr 30 23:05:30.16: [ 2269]: --> [20:+FCS:0,3,0,2,0,0,0,4]
> Apr 30 23:05:35.73: [ 2269]: --> [20:+FCS:0,2,0,2,0,0,0,4]
> Apr 30 23:05:41.64: [ 2269]: --> [7:CONNECT]
> Apr 30 23:05:41.64: [ 2269]: SEND begin page
> bytes of data
> Apr 30 23:06:10.15: [ 2269]: SEND 1D RTC
> Apr 30 23:06:10.15: [ 2269]: SEND end page
> Apr 30 23:06:10.15: [ 2269]: SEND send MPS (more pages, same document)
> Apr 30 23:06:33.43: [ 2269]: --> [7:+FHS:52]
> Apr 30 23:06:33.43: [ 2269]: REMOTE HANGUP: No response to MPS repeated 3
> times (code 52)
> Apr 30 23:06:33.43: [ 2269]: <-- [5:ATH0\r]
> Apr 30 23:06:33.55: [ 2269]: --> [2:OK]
> Apr 30 23:06:33.55: [ 2269]: MODEM set DTR OFF
> Apr 30 23:06:33.55: [ 2269]: SESSION END
>
> To: stefan.swoboda@i Date: 04/30/99 23:14
> Error: No response to MPS repeated 3 times
>
> ---- Transcript of session follows ----
>
> Apr 30 23:14:03.58: [ 2629]: SESSION BEGIN 00000034 49211452776
> Apr 30 23:14:03.58: [ 2629]: SEND FAX: JOB 25 DEST 452776 COMMID 00000034
> Apr 30 23:14:03.58: [ 2629]: MODEM set DTR OFF
> Apr 30 23:14:03.58: [ 2629]: DELAY 2600 ms
> Apr 30 23:14:06.18: [ 2629]: MODEM set DTR ON
> Apr 30 23:14:06.18: [ 2629]: MODEM set baud rate: 19200 baud, input flow
> RTS/CTS, output flow RTS/CTS
> Apr 30 23:14:06.18: [ 2629]: MODEM flush i/o
> Apr 30 23:14:06.18: [ 2629]: <-- [17:ATE0V1Q0X3S0=0H0\r]
> Apr 30 23:14:06.33: [ 2629]: --> [2:OK]
> Apr 30 23:14:06.33: [ 2629]: <-- [32:ATS8=2S7=60&H1&I0&R2S13=0&D2&C1\r]
> Apr 30 23:14:06.48: [ 2629]: --> [2:OK]
> Apr 30 23:14:06.48: [ 2629]: <-- [14:AT+FCLASS=2.0\r]
> Apr 30 23:14:06.62: [ 2629]: --> [2:OK]
> Apr 30 23:14:06.62: [ 2629]: <-- [9:AT+FLO=2\r]
> Apr 30 23:14:06.76: [ 2629]: --> [2:OK]
> Apr 30 23:14:06.76: [ 2629]: <-- [9:AT+FPP=0\r]
> Apr 30 23:14:06.90: [ 2629]: --> [2:OK]
> Apr 30 23:14:06.90: [ 2629]: <-- [9:AT+FBO=0\r]
> Apr 30 23:14:07.04: [ 2629]: --> [2:OK]
> Apr 30 23:14:07.04: [ 2629]: <-- [10:AT+FCT=30\r]
> Apr 30 23:14:07.18: [ 2629]: --> [2:OK]
> Apr 30 23:14:07.18: [ 2629]: <-- [15:AT+FNR=1,1,1,0\r]
> Apr 30 23:14:07.32: [ 2629]: --> [2:OK]
> Apr 30 23:14:07.32: [ 2629]: <-- [9:AT+FIE=0\r]
> Apr 30 23:14:07.46: [ 2629]: --> [2:OK]
> Apr 30 23:14:07.46: [ 2629]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
> Apr 30 23:14:07.61: [ 2629]: --> [2:OK]
> Apr 30 23:14:07.61: [ 2629]: <-- [5:ATM0\r]
> Apr 30 23:14:07.75: [ 2629]: --> [2:OK]
> Apr 30 23:14:07.75: [ 2629]: MODEM input buffering enabled
> Apr 30 23:14:07.75: [ 2629]: <-- [14:AT+FCLASS=2.0\r]
> Apr 30 23:14:07.99: [ 2629]: --> [2:OK]
> Apr 30 23:14:07.99: [ 2629]: <-- [9:AT+FLO=2\r]
> Apr 30 23:14:08.23: [ 2629]: --> [2:OK]
> Apr 30 23:14:08.23: [ 2629]: <-- [9:AT+FPP=0\r]
> Apr 30 23:14:08.47: [ 2629]: --> [2:OK]
> Apr 30 23:14:08.47: [ 2629]: <-- [9:AT+FBO=0\r]
> Apr 30 23:14:08.71: [ 2629]: --> [2:OK]
> Apr 30 23:14:08.71: [ 2629]: <-- [10:AT+FCT=30\r]
> Apr 30 23:14:08.95: [ 2629]: --> [2:OK]
> Apr 30 23:14:08.95: [ 2629]: <-- [15:AT+FNR=1,1,1,0\r]
> Apr 30 23:14:09.19: [ 2629]: --> [2:OK]
> Apr 30 23:14:09.19: [ 2629]: <-- [9:AT+FIE=0\r]
> Apr 30 23:14:09.43: [ 2629]: --> [2:OK]
> Apr 30 23:14:09.43: [ 2629]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
> Apr 30 23:14:09.68: [ 2629]: --> [2:OK]
> Apr 30 23:14:09.68: [ 2629]: <-- [28:AT+FLI="HylaFax@silverwolf"\r]
> Apr 30 23:14:09.93: [ 2629]: --> [2:OK]
> Apr 30 23:14:09.93: [ 2629]: DIAL 452776
> Apr 30 23:14:09.93: [ 2629]: <-- [12:ATDT0452776\r]
> Apr 30 23:14:22.30: [ 2629]: --> [4:+FCO]
> Apr 30 23:14:25.25: [ 2629]: --> [27:+FCI:" +49 211 452776"]
> Apr 30 23:14:25.25: [ 2629]: REMOTE CSI "+49 211 452776"
> Apr 30 23:14:25.25: [ 2629]: --> [20:+FIS:1,3,0,2,0,0,0,4]
> Apr 30 23:14:25.25: [ 2629]: --> [2:OK]
> Apr 30 23:14:25.25: [ 2629]: REMOTE best rate 9600 bit/s
> Apr 30 23:14:25.25: [ 2629]: REMOTE max page width 1728 pixels in 215 mm
> Apr 30 23:14:25.25: [ 2629]: REMOTE max unlimited page length
> Apr 30 23:14:25.25: [ 2629]: REMOTE best vres 7.7 line/mm
> Apr 30 23:14:25.25: [ 2629]: REMOTE best format 1-D MR
> Apr 30 23:14:25.25: [ 2629]: REMOTE best 20 ms, 10 ms/scanline
> Apr 30 23:14:25.25: [ 2629]: USE 9600 bit/s
> Apr 30 23:14:25.25: [ 2629]: USE 20 ms, 10 ms/scanline
> Apr 30 23:14:25.25: [ 2629]: SEND file "docq/doc45.ps;00"
> Apr 30 23:14:25.25: [ 2629]: USE page width 1728 pixels in 215 mm
> Apr 30 23:14:25.25: [ 2629]: USE unlimited page length
> Apr 30 23:14:25.25: [ 2629]: USE 3.85 line/mm
> Apr 30 23:14:25.25: [ 2629]: USE 1-D MR
> Apr 30 23:14:25.25: [ 2629]: <-- [23:AT+FIS=0,3,0,2,0,0,0,4\r]
> Apr 30 23:14:25.50: [ 2629]: --> [2:OK]
> Apr 30 23:14:25.50: [ 2629]: <-- [7:AT+FDT\r]
> Apr 30 23:14:25.78: [ 2629]: --> [20:+FCS:0,3,0,2,0,0,0,4]
> Apr 30 23:14:31.69: [ 2629]: --> [7:CONNECT]
> Apr 30 23:14:31.69: [ 2629]: SEND begin page
> Apr 30 23:14:55.81: [ 2629]: SENT 24438 bytes of data
> Apr 30 23:14:55.81: [ 2629]: SEND 1D RTC
> Apr 30 23:14:55.81: [ 2629]: SEND end page
> Apr 30 23:14:55.81: [ 2629]: SEND send MPS (more pages, same document)
> .05: [ 2629]: --> [7:+FHS:52]
> Apr 30 23:15:18.05: [ 2629]: REMOTE HANGUP: No response to MPS repeated 3
> times (code 52)
> Apr 30 23:15:18.05: [ 2629]: <-- [5:ATH0\r]
> Apr 30 23:15:18.18: [ 2629]: --> [2:OK]
> Apr 30 23:15:18.18: [ 2629]: MODEM set DTR OFF
> Apr 30 23:15:18.18: [ 2629]: SESSION END
>
> Nothing to purge in info directory.
>
> Truncate merged session logs older than 30 days:
>
> Nothing to purge in receive queue.
>
> Nothing to purge in the tmp directory.
>
> Destinations being rejected (added since 04/29/99 23:25):
>
> Regards,
> Stefan Swoboda
> System Engineer
> sswoboda@ford.com
> Ford Motor Company
> Tel.: +49 221 9034806
> International Local Design & Implementation
> Fax: +49 221 9033017
>
> > -----Original Message-----
> > From: Philip Rhoades [SMTP:philr@mail.austasia.net]
> > Sent: 09 May 1999 03:26
> > To: flexfax@sgi.com
> > Subject: flexfax: Is there a solution to the "No response to MPS or
> > EOP" problem?
> >
> > Hi all,
> >
> > I have looked at the archives but I can't find a solution to the problem I
> > get sending to some fax machines ie:
> >
> > "Your facsimile job to 08-8232-2924 failed because:
> > No response to MPS or EOP repeated 3 tries; Giving up after 3 attempts
> > to send same page"
> >
> > I have tried a 3Com US Robotics 56K Voice Faxmodem and a Netcomm 56K
> > Roadster with the same result.
> >
> > I seem to be getting this result about 25% of the time from various fax
> > machines - some are new, some older.
> >
> > I will have to go back to paper faxing (which drives me crazy!) if I can't
> > rely on a computer method.
> >
> > Thanks,
> >
> > Phil.
> >
> > Philip Rhoades
> >
> > Pricom Pty Limited (ACN 003 252 275)
> > GPO Box 3411
> > Sydney NSW 2001
> > Australia
> > Mobile: +61:0411-185-652
> > Fax: +61:2:9959-4909
> > E-mail: philr@mail.austasia.net
> >
> >
