Re: flexfax: COMREC Error 72

[Francois COURET <francois@a2pc.com>]

the serial port is set at 19200.
I tried to set at 9600. but all faxes sent with another fax product, have the
same COMREC error.
The another fax product considers to be good and i lose the fax.

an 22 17:50:50.42: [  444]: REMOTE TSI "05 34 25 07 08"
Jan 22 17:50:50.42: [  444]: --> [21:+FDCS:1,3,0,0,0,0,0,0]
Jan 22 17:50:50.42: [  444]: REMOTE wants 9600 bit/s
Jan 22 17:50:50.42: [  444]: REMOTE wants page width 1728 pixels in 215 mm
Jan 22 17:50:50.42: [  444]: REMOTE wants A4 page length (297 mm)
Jan 22 17:50:50.42: [  444]: REMOTE wants 7.7 line/mm
Jan 22 17:50:50.42: [  444]: REMOTE wants 1-D MR
Jan 22 17:50:50.78: [  444]: --> [7:CONNECT]
Jan 22 17:50:50.78: [  444]: RECV: begin page
Jan 22 17:50:50.78: [  444]: RECV: send trigger 022
Jan 22 17:51:21.39: [  444]: RECV: 28451 bytes of data, 1933 total lines
Jan 22 17:51:21.39: [  444]: --> [24:+FPTS:2,1933,560,64,3104]
Jan 22 17:51:22.19: [  444]: --> [6:+FET:2]
Jan 22 17:51:22.19: [  444]: RECV recv EOP (no more pages or documents)
Jan 22 17:51:22.19: [  444]: --> [2:OK]
Jan 22 17:51:22.19: [  444]: RECV send RTN (retrain negative)
Jan 22 17:51:22.19: [  444]: <-- [7:AT+FDR\r]
Jan 22 17:51:25.26: [  444]: --> [8:+FHNG:72]
Jan 22 17:51:25.26: [  444]: REMOTE HANGUP: COMREC error (code 72)
Jan 22 17:51:25.26: [  444]: RECV FAX (00000227): recvq/fax00141.tif from 05
34 25 07 08, route to <unspecified>, 0 pages in 0:42
Jan 22 17:51:25.26: [  444]: RECV FAX: COMREC error

David Woolley a écrit:

> > Jan 20 06:36:52.05: [  661]: RECV: 10039 bytes of data, 457 total lines
>
> This is very short.  I wonder if you have the serial port set at 9600?
>
>
> > Jan 20 06:36:53.31: [  661]: RECV send RTN (retrain negative)
>
> This is the real error.  If Hylafax sends RTN, it almost certainly means
> that there are excessive numbers of coding errors in the received data,
> which would be the case for a receive overrun.