Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

FW: whfc (My turn :-) )



I too was having similar problems.  I got it working from home ok, after
fixing the entry in the hosts file, but not at work.  The difference at work
is that my workstation is behind MS Proxy Server.  When I try to establish a
connection, I get a response that the server is ready (the same one you get
if you telnet to the server) and then it times out with an error to the
effect "no route to host"

Also ... I can't seem to get it to logon as admin.  it always says "bad
password".  I've tried setting up the user in the hosts file, but no dice.

Any ideas?

Thanks

-----Original Message-----
From: Jonathan Chen [mailto:jonc@pinnacle.co.nz]
Sent: Sunday, December 06, 1998 8:31 PM
To: Fred Ng
Cc: Hylafax
Subject: Re: flexfax: whfc


On Mon, 7 Dec 1998, Fred Ng wrote:

> I have configured a hylafax server. However when I logon from whfc
(windows
> client application), it keep saying that password is incorrect, no user
can
> login to the server, can anyone confirmed on which part of the server had
> went wrong.

You need to set up the HylaFAX hosts(4f) file to allow access from
your WHFC client. Check out the man page for more details.

Jonathan Chen
----------------------------------------------------------------------
             "A person should be able to do a small bit of everything,
                                        specialisation is for insects"



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services