|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
HELP: COMREC invalid response received
Hello,
my hylafax program works well when sending fax with sendfax
but I can not receive fax.
Note that the faxgetty daemon is running:
ps aux | grep faxgetty
root 15721 0.0 0.5 852 352 p0 S 11:04 0:00 grep faxgetty
uucp 15581 0.0 2.6 2780 1660 p0 S 10:35 0:00 faxgetty modem
I started it from the shell as root:
fagetty modem&
If you have any clue, please drop me a mail:
alex@hq24.newsham.com
Thank you
Alex
Included in this file:
1) the error message root@hq24 received
2) FILE: /usr/share/fax/hfaxd.conf
3) FILE: /var/spool/fax/etc/config.modem
============================================================
Error Message sent to root
============================================================
>From fax@hq24.newsham.com Tue Nov 10 10:09:22 1998
Return-Path: <fax>
Received: (from uucp@localhost)
by hq24.newsham.com (8.8.7/8.8.7) id KAA15288
for FaxMaster; Tue, 10 Nov 1998 10:09:22 -0700
Date: Tue, 10 Nov 1998 10:09:22 -0700
Message-Id: <199811101709.KAA15288@hq24.newsham.com>
To: FaxMaster@hq24.newsham.com
From: The HylaFAX Receive Agent <fax@hq24.newsham.com>
Subject: facsimile not received
An attempt to receive facsimile on modem failed because:
COMREC invalid response received
---- Transcript of session follows ----
Nov 10 10:08:46.47: [11446]: SESSION BEGIN 00000037 17196307698
Nov 10 10:08:46.47: [11446]: <-- [4:ATA\r]
Nov 10 10:08:46.99: [11446]: --> [3:FAX]
Nov 10 10:08:46.99: [11446]: ANSWER: FAX CONNECTION
Nov 10 10:08:46.99: [11446]: RECV FAX: begin
Nov 10 10:08:53.13: [11446]: --> [5:+FCON]
Nov 10 10:08:54.81: [11446]: --> [29:+FTSI: " 719 630 8021"]
Nov 10 10:08:54.81: [11446]: REMOTE TSI "719 630 8021"
Nov 10 10:08:55.22: [11446]: --> [22:+FDCS: 0,3,0,2,1,0,0,0]
Nov 10 10:08:55.22: [11446]: REMOTE wants 9600 bit/s
Nov 10 10:08:55.22: [11446]: REMOTE wants page width 1728 pixels in 215 mm
Nov 10 10:08:55.22: [11446]: REMOTE wants unlimited page length
Nov 10 10:08:55.22: [11446]: REMOTE wants 3.85 line/mm
Nov 10 10:08:55.22: [11446]: REMOTE wants 2-D MR
Nov 10 10:08:55.22: [11446]: --> [2:OK]
Nov 10 10:08:55.22: [11446]: <-- [7:AT+FDR\r]
Nov 10 10:08:56.84: [11446]: --> [5:+FCFR]
Nov 10 10:08:59.14: [11446]: --> [22:+FDCS: 0,3,0,2,1,0,0,0]
Nov 10 10:08:59.14: [11446]: REMOTE wants 9600 bit/s
Nov 10 10:08:59.14: [11446]: REMOTE wants page width 1728 pixels in 215 mm
Nov 10 10:08:59.14: [11446]: REMOTE wants unlimited page length
Nov 10 10:08:59.14: [11446]: REMOTE wants 3.85 line/mm
Nov 10 10:08:59.14: [11446]: REMOTE wants 2-D MR
Nov 10 10:08:59.14: [11446]: --> [7:CONNECT]
Nov 10 10:08:59.14: [11446]: RECV: begin page
Nov 10 10:08:59.14: [11446]: RECV: send trigger 021
Nov 10 10:09:11.39: [11446]: RECV: 83 total lines, 0 bad lines, 0 consecutive bad lines
Nov 10 10:09:11.39: [11446]: --> [17:+FPTS: 2,2219,0,0]
Nov 10 10:09:20.97: [11446]: --> [10:+FHNG: 102]
Nov 10 10:09:20.97: [11446]: REMOTE HANGUP: COMREC invalid response received (code 102)
Nov 10 10:09:21.54: [11446]: --> [2:OK]
Nov 10 10:09:21.54: [11446]: RECV FAX (00000037): recvq/fax00017.tif from 719 630 8021, route to <unspecified>, 0 pages in 0:34
Nov 10 10:09:21.54: [11446]: RECV FAX: COMREC invalid response received
Nov 10 10:09:21.54: [11446]: RECV FAX (00000037): session with 719 630 8021 terminated abnormally: COMREC invalid response received
Nov 10 10:09:21.54: [11446]: RECV FAX: bin/faxrcvd "recvq/fax00017.tif" "modem" "00000037" "COMREC invalid response received"
============================================================
FILE: /usr/share/fax/hfaxd.conf
============================================================
#
# HylaFAX Client-Server Protocol Configuration.
#
# Consult hfaxd(1M) for information on the contents
# of this file. Note that pathnames specified in
# this file are relative to the root of the spooling
# area because hfaxd uses chroot to confine client
# accesses to the server's filesystem.
#
LogFacility: daemon # syslog facility (want this 1st))
ServerTracing: 0x001 # just server operation
#IdleTimeout: 900 # initial client idle timeout (secs)
#MaxIdleTimeout: 7200 # max client idle timeout (secs)
#MaxLoginAttempts: 5 # max # login attempts before disconnect
#MaxAdminAttempts: 5 # max # admin attempts before disconnect
#MaxConsecutiveBadCmds: 10 # max # invalid cmds before disconnect
#FaxContact: FaxMaster # who gets questions/complaints
#UserAccessFile: "/etc/hosts" # user+host access control file
#ShutdownFile: "/etc/shutdown" # server shutdown control filename
#XferLogFile: "/etc/clientlog" # for logging client file transfers
#FaxQFIFOName: "/FIFO" # FIFO name for talking to faxq process
#
# The default format used to return job status queries.
# Note that clients can override this with JOBFMT.
#
#JobFmt: "%-3j %3i %1a %6.6o %-12.12e %5P %5D %7z %.25s"
#
# The default format used to return recvq status queries.
# Note that clients can override this with RCVFMT.
#
#RcvFmt: "%-7m %4p%1z %-8.8o %14.14s %7t %f"
#
# The default format used to return modem status queries.
# Note that clients can override this with MODEMFMT.
#
#ModemFmt: "Modem %m (%n): %s"
#
# The default format used to return file-oriented
# directory listings.
# Note that clients can override this with FILEFMT.
#
#FileFmt: "%-7p %3l %8o %8s %-12.12m %.48f"
#
# SNPP-specific parameters.
#
#MaxMsgLength: 128 # max pager message length
#PagerIDMapFile: "/etc/pagermap" # file with pager ID mapping rules
#
# The following three items define the mapping from
# SNPP service level to job scheduling priority and
# expiration (kill) time. Each item should have a
# list of 12 values that define the mapping for service
# levels 0 through 11 (first item is level 0, second
# item level 1, ... etc.).
#
#PriorityMap: "63 127 127 127 127 127 127 127 127 127 127 127"
#RetryTimeMap: "30 60 60 180 0 0 0 0 0 0 0 0"
#KillTimeMap: " 5 5 5 15 60 240 720 1440 1440 1440 1440 1440"
============================================================
FILE: /var/spool/fax/etc/config.modem
============================================================
# $Id: rockwell,v 1.2 1996/06/24 02:58:40 sam Rel $
#
# HylaFAX Facsimile Software
#
# Copyright (c) 1990-1996 Sam Leffler
# Copyright (c) 1991-1996 Silicon Graphics, Inc.
# HylaFAX is a trademark of Silicon Graphics, Inc.
#
# Permission to use, copy, modify, distribute, and sell this software and
# its documentation for any purpose is hereby granted without fee, provided
# that (i) the above copyright notices and this permission notice appear in
# all copies of the software and related documentation, and (ii) the names of
# Sam Leffler and Silicon Graphics may not be used in any advertising or
# publicity relating to the software without the specific, prior written
# permission of Sam Leffler and Silicon Graphics.
#
# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND,
# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY
# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
#
# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,
# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF
# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
# OF THIS SOFTWARE.
#
#
# Configuration for a Rockwell-based modem not otherwise handled by
# another prototype configuration file. This file assumes the modem
# is compatible with the Rc144AC, RC96AC or RC144DP.
#
# This configuration file sets up the modem to run at 38.4 with
# RTS/CTS flow control used by default. XON/XOFF is automatically
# enabled for fax recv. Beware of modems that also lock sending
# to 19.2; add ModemSendBeginCmd: "<19200>" if this is required.
# Also beware that the adaptive-answer facility, when supported,
# is often unreliable.
#
#
CountryCode: 1
AreaCode: 719
FAXNumber: 6307698
LongDistancePrefix: 1
InternationalPrefix: 011
DialStringRules: etc/dialrules
ServerTracing: 1
SessionTracing: 11
RecvFileMode: 0600
LogFileMode: 0600
DeviceMode: 0600
RingsBeforeAnswer: 1
SpeakerVolume: off
GettyArgs: "-h %l %s"
LocalIdentifier: "Newsham Hybrids (USA) faxserver hq24"
TagLineFont: etc/lutRS18.pcf
TagLineFormat: "From %%l|%c|Page %%p of %%t"
MaxRecvPages: 25
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType: Class2 # use class 2 interface
ModemRate: 38400
ModemFlowControl: rtscts # default
#
#ModemResetCmds: AT&F2 # what you want for a Supra
ModemNoFlowCmd: AT&K # disable flow control cmd
ModemHardFlowCmd: AT&K3 # hardware flow control cmd
ModemSoftFlowCmd: AT&K4 # software flow control cmd
ModemSetupDTRCmd: AT&D3 # DTR off causes modem to reset
#ModemSetupDTRCmd: AT&D2S25=1S38=0 # Dynalink 1414VE needs this
ModemSetupDCDCmd: AT&C1 # DCD follows carrier
ModemSetupAACmd: AT+FAA=1+FCLASS=0 # enable in current class
#
ModemSendFillOrder: LSB2MSB # as expected
ModemRecvFillOrder: MSB2LSB # opposite of what makes sense
#
ModemAnswerFaxBeginCmd: "<19200><xon>" # modem switches on fax receive
#
# Caller ID configuration setup for Supra.
#
#QualifyCID: etc/cid # CID access control list file
#CIDNumber: "NMBR = " # pattern string for phone number info
#CIDName: "NAME = " # pattern string for identity info
