Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: error code A1



David Woolley wrote:
> Have you checked up on the workarounds for the firmware bugs in this modem?
Sorry no. Can You give me the pointer where to find this information?

> carrier was detected).  Looks like a modem or remote system problem to
> me.  If there is any Hylafax problem it will be in the negotiated options
> that you deleted from the trace.
Well here's the complete trace:

Sep 09 14:49:52.32: [30244]: SESSION BEGIN 00000173 499131603299
Sep 09 14:49:52.32: [30244]: <-- [4:ATA\r]
Sep 09 14:49:58.48: [30244]: --> [4:+FCO]
Sep 09 14:49:58.48: [30244]: ANSWER: FAX CONNECTION
Sep 09 14:49:58.48: [30244]: MODEM input buffering enabled
Sep 09 14:49:58.48: [30244]: RECV FAX: begin
Sep 09 14:50:00.49: [30244]: --> [27:+FTI:"    +49 <xxxxxxxxxx>"]
Sep 09 14:50:00.49: [30244]: REMOTE TSI "+49 <xxxxxxxxxx>"
Sep 09 14:50:00.49: [30244]: --> [20:+FCS:0,5,0,2,0,0,0,0]
Sep 09 14:50:00.49: [30244]: REMOTE wants 14400 bit/s
Sep 09 14:50:00.49: [30244]: REMOTE wants page width 1728 pixels in 215 mm
Sep 09 14:50:00.49: [30244]: REMOTE wants unlimited page length
Sep 09 14:50:00.49: [30244]: REMOTE wants 3.85 line/mm
Sep 09 14:50:00.49: [30244]: REMOTE wants 1-D MR
Sep 09 14:50:00.49: [30244]: --> [2:OK]
Sep 09 14:50:00.49: [30244]: <-- [7:AT+FDR\r]
Sep 09 14:50:05.93: [30244]: --> [7:CONNECT]
Sep 09 14:50:05.93: [30244]: RECV: begin page
Sep 09 14:50:05.93: [30244]: RECV: send trigger 022
Sep 09 14:50:05.93: [30244]: <-- data [1]
Sep 09 14:50:06.93: [30244]: RECV: 0 total lines, 0 bad lines, 0 consecutive bad
lines
Sep 09 14:50:06.93: [30244]: --> [14:+FPS:1,0,0,0,0]
Sep 09 14:50:17.33: [30244]: --> [7:+FHS:A1]
Sep 09 14:50:17.33: [30244]: REMOTE HANGUP: RSPREC invalid response received
(code A1)
Sep 09 14:50:17.45: [30244]: --> [2:OK]
Sep 09 14:50:17.45: [30244]: RECV FAX (00000173): recvq/fax00035.tif from +49
<xxxxxxxxxx>, route to <unspecified>, 0 pages in 0:19
Sep 09 14:50:17.45: [30244]: RECV FAX: RSPREC invalid response received
Sep 09 14:50:17.45: [30244]: RECV FAX (00000173): session with +49 <xxxxxxxx>
terminated abnormally: RSPREC invalid response received
Sep 09 14:50:17.45: [30244]: RECV FAX: bin/faxrcvd "recvq/fax00035.tif" "modem"
"00000173" "RSPREC invalid response received"
Sep 09 14:50:21.23: [30244]: RECV FAX: end
Sep 09 14:50:21.23: [30244]: SESSION END 

Does this say something more to anyone?

Thanks again,

Christian



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services