Re: flexfax: error code A1

[David Woolley <david@djwhome.demon.co.uk>]

> 
> I'm running Hylafax V4.0pl2 on SuSE Linux 5.3 with a USR Sportster Voice 33.6KB.

Have you checked up on the workarounds for the firmware bugs in this modem?

> Everythings quite fine so far. I can send and receive faxes all well. But
> especially with one client, which is using a Fax-Software called 'C3' I get this
> error-message:
> 
> Sep 08 16:55:36.96: [30244]: RECV: send trigger 022
> Sep 08 16:55:36.96: [30244]: <-- data [1]
> Sep 08 16:55:38.01: [30244]: RECV: 0 total lines, 0 bad lines, 0 consecutive bad

The modem or remote system aborted the data phase after about 1 second with
no data transferred (probably it means it was aborted immediately 
carrier was detected).  Looks like a modem or remote system problem to
me.  If there is any Hylafax problem it will be in the negotiated options
that you deleted from the trace.

> lines
> Sep 08 16:55:38.01: [30244]: --> [14:+FPS:1,0,0,0,0]
> Sep 08 16:55:48.37: [30244]: --> [7:+FHS:A1]

This appears not to be a valid code, so may be a locally generated error
message from the modem; you will need technical documentation for the
modem, if that is the case.  (I've only got Class 2 and Class 1 commands,
so I am assuming that this corresponds to a certain value in the Class
2 protocol.)