Re: flexfax: Got disconnected before SEND FILE

[Thidarat Pornkarnchananun <pornkarn@fsl.noaa.gov>]

Hi David,
At that time I sent you this mail, I installed the software from binary version
4.0pl2 and my faxq didn't work quite right. It didn't trig the transmission,
therefore I had to use 'faxsend' command right after 'sendfax' was done. The
result was what I attached to you. Your suggestion was close to what I doubted
before. I did what you said, but it remained the same.
Then I worked another way around trying to make faxq completely work. Later on I
was suggested to install the latest version (4.0pl2-2). The faxq now works OK.
Faxsend is automatically trigged right after sendfax submits the job, if I want
the transmission happen 'now'. (Anyhow, if I try using faxsend command alone to
send an incomplete job, the result still the same. But, what the heck, my faxq
and sendfax are now working  :)   ).
Just would like to let you know how the problem's going on and express my
appreciation about your help. I was stucked by this problem for weeks, and it's
good to get some help from people outside.
Again, thank you so much.
Best regards,
Thidarat
David Woolley wrote:

> > Aug 20 16:25:57.24: [  824]: USE 20 ms, 10 ms/scanline
> > Aug 20 16:25:57.24: [  824]: <-- [5:ATH0\r]
> > Aug 20 16:25:58.86: [  824]: --> [7:+FHNG:2]
> > Aug 20 16:25:58.86: [  824]: REMOTE HANGUP: Call aborted,  from +FK or
> > <CAN> (co
> > de 2)
>
> Hylafax aborted the call during phase B (option negotiation).  The legitimate
> reason for this would be that the last time it called the number the remote
> machine was prepared to accept a more efficient fax coding (possibly because
> it is a modem pool and you got a different modem), an Hylafax has code that
> way be now needs to regenerate the fax data.  If this is the case
> (and the fax will go eventually in that case), use & to lock down the lower
> specification in the info file.



--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Thidarat Pornkarnchananun
pornkarn@fsl.noaa.gov
voice:(303)497-7248 | fax:(303)497-7256
NOAA Forecast System Laboratory
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~