Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Multitechs getting stuck



Mark G. Thomas wrote...
> 
> I'm still having this problem where Multitech MT2835BR and MT2834ZDX modems
> get slighly stuck after a no-answer call.  Usually this goes unnoticed
> since faxgetty unwedges things, however sometimes it causes premature
> send fax rejections, if a send attempt hits the modem immediately following
> one of these no-answer fax-send attempts.
> 
> Note the timeout below.  I would be most interested in info from
> any Multitech users with 2834 modems who are not getting these timeouts
> after no-answer calls.

Sorry not to have an answer for this, but I have exactly the same
timeout behavior with my 2834ZDX and never noticed it until I went to
try on mine to see if I could reproduce your problem.  I switched to the
2834 a couple months ago after my trusty old WorldBlazer died.

Please do post if you find a solution.

Larry Lipstone
StoneWare Consulting, Inc.



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services