Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Client does not support document page width, max remote page width 172s
- To: "HylaFAX Mailing List" <flexfax@sgi.com>
- Subject: flexfax: Client does not support document page width, max remote page width 172s
- From: "jm@dewcon.com" <jm@dewcon.com>
- Date: Fri, 6 Feb 98 21:01:04 +0100
Feb 06 09:55:29.27: [24310]: REMOTE best rate 9600 bit/s
Feb 06 09:55:29.27: [24310]: REMOTE max page width 1728 pixels in 215 mm
hi,
very often i receive this error message (usualy a plain paper fax):
---------------------------------------------------------------------------
---------
Feb 06 09:50:26.80: [24304]: <-- [16:ATDT074258055)@\r]
Feb 06 09:50:43.02: [24304]: --> [5:+FCON]
Feb 06 09:50:45.70: [24304]: --> [69:+FNSF:00 00 09 02 08 04 49 74 25 80
55 FF FF FF 43 21 FF FF 02]
Feb 06 09:50:45.70: [24304]: REMOTE NSF "00 00 09 02 08 04 49 74 25 80 55
FF FF FF 43 21 FF FF 02 0"
Feb 06 09:50:45.70: [24304]: --> [28:+FCSI:" 49 7425 8055"]
Feb 06 09:50:45.70: [24304]: REMOTE CSI "49 7425 8055"
Feb 06 09:50:45.70: [24304]: --> [21:+FDIS:1,3,0,2,0,0,0,4]
Feb 06 09:50:45.81: [24304]: --> [2:OK]
Feb 06 09:50:45.81: [24304]: REMOTE best rate 9600 bit/s
Feb 06 09:50:45.81: [24304]: REMOTE max page width 1728 pixels in 215 mm
Feb 06 09:50:45.81: [24304]: REMOTE max unlimited page length
Feb 06 09:50:45.81: [24304]: REMOTE best vres 7.7 line/mm
Feb 06 09:50:45.81: [24304]: REMOTE best format 1-D MR
Feb 06 09:50:45.81: [24304]: REMOTE best 20 ms, 10 ms/scanline
Feb 06 09:50:45.81: [24304]: USE 9600 bit/s
Feb 06 09:50:45.81: [24304]: USE 20 ms, 10 ms/scanline
Feb 06 09:50:45.81: [24304]: SEND file "docq/doc14.ps;01"
Feb 06 09:50:45.81: [24304]: Client does not support document page width,
max remote page width 172s
Feb 06 09:50:45.82: [24304]: <-- [5:ATH0\r]
Feb 06 09:50:47.45: [24304]: --> [7:+FHNG:2]
Feb 06 09:50:47.45: [24304]: REMOTE HANGUP: Call aborted, from +FK or
<CAN> (code 2)
Feb 06 09:50:47.96: [24304]: --> [2:OK]
Feb 06 09:50:47.96: [24304]: SESSION END
---------------------------------------------------------------------------
----------
is there a sendfax parameter i can change to avoid that?
(i am using: sendfax -m -n -s A4 -t10 -d ...)
thank you very much for a reply
jens
------------------------------------------------------------------
Dewcon Instruments Inc. DEWCON - MADE TO MEASURE
Jens Martens
Am Bergheimer Hof 9a
70499 Stuttgart
fone: +49 711 861025
fone: +49 172 7133371
fax: +49 7720 8601741
------------------------------------------------------------------