Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: fax receive problem



> 
> I am having problems with incoming faxes. There is a bunch of whitespace
> before the information appears on the page, effectively cutting off most of
> the fax; this is from multiple fax machines.Attached is the ps file
 
> The following is a trace of the receive log. Any help would be greatly
> appreciated! 

No apparent errors here.

> --=====================_886924943==_
> Content-Type: application/postscript; charset="us-ascii"

I'm not sure I agree with posting such attachments anyway, but at least
do it properly.  This was an 8 bit binary; you sent it as seven bit text;
it didn't survive.  In any case, you should have sent the TIFF file if
you suspected a problem in the fax receiver, as the log would have been
irrelevant for any error occuring in the TIFF to ps conversion.

What happens if you use a TIFF viewer?

Note the TIFF file should be a lot smaller than a correctly transmitted
postscript file done in the way that this version of fax2ps did it.



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services