flexfax: fax receive problem

[Randy Kochis <randy@surfnfax.com>]

I am having problems with incoming faxes. There is a bunch of whitespace
before the information appears on the page, effectively cutting off most of
the fax; this is from multiple fax machines.Attached is the ps file
generated. 

Hylafax 4.0pl1, Sparc4, Solaris 2.6

The following is a trace of the receive log. Any help would be greatly
appreciated! 

Feb 07 15:18:17.97: [13845]: SESSION BEGIN 00001071 16196503090
Feb 07 15:18:18.02: [13845]: <-- [4:ATA\r]
Feb 07 15:18:26.05: [13845]: --> [5:+FCON]
Feb 07 15:18:26.05: [13845]: ANSWER: FAX CONNECTION
Feb 07 15:18:26.07: [13845]: RECV FAX: begin
Feb 07 15:18:27.64: [13845]: --> [29:+FTSI: "Surf-n-Fax          "]
Feb 07 15:18:27.64: [13845]: REMOTE TSI "Surf-n-Fax"
Feb 07 15:18:28.18: [13845]: --> [22:+FDCS: 1,5,0,2,1,0,0,0]
Feb 07 15:18:28.18: [13845]: REMOTE wants 14400 bit/s
Feb 07 15:18:28.18: [13845]: REMOTE wants page width 1728 pixels in 215 mm
Feb 07 15:18:28.18: [13845]: REMOTE wants unlimited page length 
Feb 07 15:18:28.18: [13845]: REMOTE wants 7.7 line/mm
Feb 07 15:18:28.18: [13845]: REMOTE wants 2-D MR
Feb 07 15:18:28.18: [13845]: --> [2:OK]
Feb 07 15:18:28.18: [13845]: <-- [7:AT+FDR\r]
Feb 07 15:18:31.32: [13845]: --> [5:+FCFR]
Feb 07 15:18:33.48: [13845]: --> [22:+FDCS: 1,5,0,2,1,0,0,0]
Feb 07 15:18:33.48: [13845]: REMOTE wants 14400 bit/s
Feb 07 15:18:33.48: [13845]: REMOTE wants page width 1728 pixels in 215 mm
Feb 07 15:18:33.50: [13845]: REMOTE wants unlimited page length 
Feb 07 15:18:33.50: [13845]: REMOTE wants 7.7 line/mm
Feb 07 15:18:33.50: [13845]: REMOTE wants 2-D MR
Feb 07 15:18:33.50: [13845]: --> [7:CONNECT]
Feb 07 15:18:33.50: [13845]: RECV: begin page
Feb 07 15:18:33.53: [13845]: RECV: send trigger 021
Feb 07 15:18:33.53: [13845]: <-- data [1]
Feb 07 15:18:58.79: [13845]: RECV: 828 total lines, 0 bad lines, 0
consecutive b
ad lines
Feb 07 15:18:58.83: [13845]: --> [17:+FPTS: 1,2219,0,0]
Feb 07 15:18:59.27: [13845]: --> [7:+FET: 2]
Feb 07 15:18:59.27: [13845]: RECV recv EOP (no more pages or documents)
Feb 07 15:18:59.38: [13845]: --> [2:OK]
Feb 07 15:18:59.40: [13845]: RECV send MCF (message confirmation)
Feb 07 15:18:59.40: [13845]: RECV FAX (00001071): from Surf-n-Fax, page 1
in 0:3
1, INF, 7.7 line/mm, 2-D MR
Feb 07 15:18:59.40: [13845]: RECV FAX (00001071): recvq/fax00019.tif from
Surf-n
-Fax, route to <unspecified>, 1 pages in 0:33
Feb 07 15:18:59.43: [13845]: <-- [7:AT+FDR\r]
Feb 07 15:19:02.22: [13845]: --> [8:+FHNG: 0]
Feb 07 15:19:02.22: [13845]: REMOTE HANGUP: Normal and proper end of
connection 
(code 0)
Feb 07 15:19:02.22: [13845]: RECV FAX: bin/faxrcvd "recvq/fax00019.tif"
"cua_a" 
"00001071" ""
Feb 07 15:19:05.79: [13845]: RECV FAX: end
Feb 07 15:19:05.80: [13845]: SESSION END

Attachment Converted: "C:\PROGRAM FILES\EUDORA\Attach\flexfax fax receive problem.ps"