|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: Problem with modem-configuration
-----BEGIN PGP SIGNED MESSAGE-----
On Mon, 2 Feb 1998, Michael Mvller wrote:
> Hi,
> I've got problems to get a new modem work with HylaFAX.
> It's an ACEEX 2814V. It was a present and it has not a very well
> documentation, but the manual says that it is compatible with
> class 2. So I tested the class2 config file contributed with HylaFAX.
> But it doesn't work :-( I also checked the rc288dpi config file but
> this doesn't work either. I'm not familar with class2 fax setups , so
> is there anybody who got this modem-type to work? Or any hints ?
> I've included the session logs below.
Don't bother. A lot of 28.8 and 33.6 modems have had problems with
Class2, whether it is the modem manufacturer or some HylaFAX subtlety
seems not too vital in the short run. Try it in Class1.
Nico Garcia
Engineer, CIRL
Mass. Eye and Ear Infirmary
raoul@cirl.meei.harvard.edu
-----BEGIN PGP SIGNATURE-----
Version: 2.6.2
iQCVAwUBNNiCSj/+ItycgIJRAQFYtAP+MyJtVC0XmW4VEbJFLEGWGvDkKVLMmjMe
hXFCP7MmsxXiJBvR3/5osA0r5xG6OS3+mNoRP00rpcyTIEkd2uhZhP+pHd1G735g
UYVcx6t7yclO4cki2qwj1hKqjYnfWVbgKTeeHY7a7ObdCyu/sAXbl0SmiAQA1d4m
XKKBCaq/2b4=
=2JgQ
-----END PGP SIGNATURE-----
