flexfax: ppp fails

[Christophe Zwecker <doc@rrz.uni-hamburg.de>]

Hi,
I use hylfax 4.0pl1 on linux 2.0.33
it seems that my faxmodem doesn't switch to data mode. people trying to
log in to data still get the high pitch fax tone.

The mgetty parms are:
GettyArgs:              "-r -s %s %l"

mgetty is configured as direct line, the login.conf is unchanged, before
I used mgetty only and it worked, so it shouldn't be the login.conf.

My modem is an Elsa 28.8 TQV. I get this erorrs with ppp in verbose
mode:

Jan 29 00:25:55 dumbo FaxGetty[482]: ANSWER: DATA CONNECTION
Jan 29 00:25:55 dumbo FaxGetty[482]: GETTY: START "/usr/sbin/mgetty -r
-s 19200 ttyS1", pid 12067
Jan 29 00:26:07 dumbo mgetty[12067]: data dev=ttyS1, pid=12067,
caller=none, conn='DIRECT', name='', cm
d='/usr/sbin/pppd', user='/AutoPPP/'
Jan 29 00:26:07 dumbo kernel: PPP: version 2.2.0 (dynamic channel
allocation)
Jan 29 00:26:07 dumbo kernel: PPP Dynamic channel allocation code
copyright 1995 Caldera, Inc.
Jan 29 00:26:07 dumbo kernel: PPP line discipline registered.
Jan 29 00:26:07 dumbo kernel: registered device ppp0
Jan 29 00:26:07 dumbo syslog: IPX support is not present in the kernel
Jan 29 00:26:07 dumbo pppd[12067]: pppd 2.2.0 started by ppp, uid 0
Jan 29 00:26:07 dumbo pppd[12067]: Using interface ppp0
Jan 29 00:26:07 dumbo pppd[12067]: Connect: ppp0 <--> /dev/ttyS1
Jan 29 00:26:07 dumbo pppd[12067]: sent [LCP ConfReq id=0x1 <mru 1500>
<auth pap> <magic 0xd507248b> <p
comp> <accomp>]
Jan 29 00:26:34 dumbo last message repeated 9 times
Jan 29 00:26:37 dumbo pppd[12067]: LCP: timeout sending Config-Requests
Jan 29 00:26:37 dumbo pppd[12067]: Connection terminated.
Jan 29 00:26:37 dumbo pppd[12067]: Receive serial link is not 8-bit
clean:
Jan 29 00:26:37 dumbo pppd[12067]: Problem: all had bit 7 set to 1
Jan 29 00:26:37 dumbo pppd[12067]: Exit.
Jan 29 00:26:37 dumbo FaxGetty[482]: GETTY: exit status 0

Maybe somethin with the config.ttyS1 ? I don't know most of the
settings.
I would be very greatful for anyone with the same modem and WORKING data
connects to send me their config file, or anyone able to point me to the
right direction.

Thank you very much

bye
-- 
Christophe Zwecker                email: doc@rrz.uni-hamburg.de
Hamburg, Germany                    fax: +49 40 22715433