Re: flexfax: Re: (Missing Subject)

[Julio C Spinelli <spine001@gold.tc.umn.edu>]

No clue is this has anything to do, but check on the copy quality 
checking response that your modem provides, some modems say that they 
do copy quality checking but they don't. You can always overrule the 
modem response in the config.xxx file. You may also want to set a low 
percentage of good lines and a high number of consecutive bad lines 
as acceptable. And see what happens...

Julio

Note: may be forcing a lower baud rate will help.

> Date:          Wed, 29 Oct 1997 03:08:32 -0600
> To:            David Woolley <david@djwhome.demon.co.uk>
> From:          "Scott R. Keszler" <keszler@rrnet.com>
> Subject:       flexfax: Re: (Missing Subject)
> Cc:            flexfax@sgi.com

> At 08:20 AM 10/28/97 +0000, David Woolley wrote:
> >> Running hylafax-v4.0pl1 on Linux 1.3-3#17 on a Cyrix 6x86L (P166, not MMX)
> >                                   ^^^^^^^^
> 
> Yeouch - I didn't even notice that.  I'm running 2.0.29; I must have
> slipped cutting the string out of the xterm.
> 
> I've been beating my head against the wall on this - from two different
> mfgrs/models of fax machine I get the following:
> 
> Oct 28 16:53:17.36: [ 2890]: --> [17:+FPTS: 1,2219,0,0]
> Oct 28 16:53:18.70: [ 2890]: --> [7:+FET: 2]
> Oct 28 16:53:18.70: [ 2890]: RECV recv EOP (no more pages or documents)
> Oct 28 16:53:18.81: [ 2890]: --> [2:OK]
> Oct 28 16:53:18.81: [ 2890]: RECV send RTN (retrain negative)
> Oct 28 16:53:18.81: [ 2890]: <-- [7:AT+FDR\r]
> Oct 28 16:53:21.53: [ 2890]: --> [8:+FHNG: 0]
> 
> but receiving from a fax modem (motorola class 2 on an AIX box running
> proprietary fax software - imaging system) I get:
> 
> Oct 28 17:52:37.62: [ 2890]: --> [17:+FPTS: 1,2219,0,0]
> Oct 28 17:52:38.84: [ 2890]: --> [7:+FET: 2]
> Oct 28 17:52:38.84: [ 2890]: RECV recv EOP (no more pages or documents)
> Oct 28 17:52:38.84: [ 2890]: --> [2:OK]
> Oct 28 17:52:38.84: [ 2890]: RECV send MCF (message confirmation)
> Oct 28 17:52:38.84: [ 2890]: <-- [7:AT+FDR\r]
> Oct 28 17:52:41.47: [ 2890]: --> [8:+FHNG: 0]
> 
> When receiving from a fax machine, hylaFAX sends a retrain request but
> the fax machine hangs up.  When receiving from a fax modem, hylaFAX
> sends a message confirmation and accepts the page. I've watched as the
> fax arrives from both fax machines - the tif is created in recvq, grows
> to the correct size, then gets deleted when the fax machine hangs up.
> 
> I haven't been able to find any reason why hylaFAX is sending a retrain
> request - no receive errors appear the the log - or why the fax machine
> is ignoring the request.  I've tried adding the config line shown on the
> web page for class 2 modems to no effect. I've set the session tracing
> to 131071 and not seen anything indicating the problem.  I've set the
> fax modem's port speed from 38400 down to 9600.  No matter what I do,
> it sends a retrain request and gets hung up on by the fax machine.
> 
> Ideas?
> 
> 
> 
> -- 
> Dead Hard Drives make great clocks: http://rrnet.com/~keszler/hddclock.html
> 
>