Re: flexfax: Re: Problems with MPS (more pages, same document)

[Andreas Busse <ab@ivm.net>]

On Fri, 10 Oct 1997, Steven Freed wrote:

Hi,

I would also like to know what to do to ignore the NACK. I put in
the Class2DCCQueryCmd line recommended by someone else, but it
doesn't help. Now the remote fax now drops the line. Not better 
at all...

Regards,
Andy

> 
> In your reply to this, you said:
> 
>    This is because a RTN is sent from the receiving side.
>    We have seen this before for some fax machines. Ricoh FAX1700L
>    is one of them. Our work around is to ignore the nack and assume
>    it is ok !
> 
> What did you do to "ignore the nack"? We are having this same problem, we
> have a Zyxel 1496 and it only happens when connecting to a few fax
> machines. I have the lastest firmware from Zyxel, and I am pretty sure it
> is not an ECM problem since we do have the line
> 
>    Class2DCCQueryCmd:     "!(0,1),(0-5),(0-2),(0-2),(0,1),(0),(0),(0-7)"
> 
> in our config file and if I take it out we have bad problems to almost
> every machine we connect to.
> 
> Does anyone out there use a US Robotics Courier V.everything for faxing?
> How well does it work? Better than the Zyxels?
> 
> Thanks,
> Steven.
> 
> 

--
-------------------------------------------------------------- ab@ivm.net ---
  | \    / |\  /|  Gesellschaft fuer   | Andreas Busse
  |  \  /  | \/ |  Internet,           | Im Hufen Boden 16, D-53498 Waldorf
  |   \/   |    |  Vernetzung und      | tel 02636-97690 fax 02636-9769-999
                   Mehrwertdienste mbH | info@ivm.net - http://www.ivm.net/
-----------------------------------------------------------------------------