Re: flexfax: Any additions to the TODO List?

[Neil Buckingham <neil@vic.design.telstra.com.au>]

	Here is another item for the todo list.

	hylafax v4.0pl1 IXO/TAP pager protocol not conforming to Australian ( 
Probably international also ) standard.
	When sending a pager message to a invalid pager number, hylafax just drops 
the line and does not go through the correct disconnect procedures. It does do 
the correct disconnect procedures when sending to a valid pager number.

	e.g.
	Here is a trace from a valid pager number

Oct 07 09:20:49.34: [23526]: EXPECT ID (paging central identification)
Oct 07 09:20:51.35: [23526]: MODEM TIMEOUT: reading line from modem
Oct 07 09:20:51.70: [23526]: RECV ID ("ID=")
Oct 07 09:20:51.70: [23526]: SEND device identification/login request
Oct 07 09:20:52.44: [23526]: RECV:  Log-on accepted
Oct 07 09:20:52.44: [23526]: RECV ACK (login successful)
Oct 07 09:20:52.45: [23526]: RECV: Ready for messages
Oct 07 09:20:52.45: [23526]: RECV go-ahead (prologue done)
Oct 07 09:20:52.45: [23526]: SEND message block
Oct 07 09:20:53.13: [23526]: RECV: Send next message
Oct 07 09:20:53.13: [23526]: RECV ACK (message block accepted)
Oct 07 09:20:53.65: [23526]: RECV: Thank you for calling
Oct 07 09:20:53.66: [23526]: RECV EOT (disconnect)
Oct 07 09:20:53.66: [23526]: SEND PAGE: FROM www@zarquon.vic.design.telecom.com