Re: problem with Motorola ModemSURFR modem

[Jonathan Chen <jonc@pinnacle.co.nz>]

On Tue, 29 Jul 1997, D. Hugh Redelmeier wrote:

> I ended up using 
> 
> 	"AT<flush>Z\n<waitfor:OTHER>AT"
> 
> which seems pretty fishy.  What is the right way to do this?

In normal operation, HylaFAX doesn't usually send a ATZ command down
the line to reset the modem; it does the reset by lowering DTR. Your
modem should be configured to enable this (check ModemSetupDTRCmd).

The initialization string sent to your modem after this reset is
determined by ModemResetCmds, which should read something like:

	ModemResetCmds:         ATB0&G2S11=60

If this doesn't work, you'll have to send the list your config file.
--
Jonathan Chen                          e-mail : jonc@pinnacle.co.nz
  Pinnacle Software Ltd                Voice  : +64.9.415.4460
  Auckland, New Zealand                Fax    : +64.9.415.4250