|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Random Modem Timeouts
Hi, I'm using HylaFax 4.0pl1 with a Sun solaris 2.5.1 for send only
environment. All goes fine, but sometimes I get random timeouts.. I've got
a SupraFax modem. Here's one (of the worst) logs:
Jul 11 16:10:42.85: [21216]: SESSION BEGIN 00000056 972972761579
Jul 11 16:10:42.85: [21216]: SEND FAX: JOB 149 DEST 761579 COMMID 00000056
Jul 11 16:10:42.86: [21216]: DELAY 2600 ms
Jul 11 16:10:45.46: [21216]: <-- [22:AT&F2S0=1E0V1Q0S0=0H0\r]
Jul 11 16:10:45.74: [21216]: --> [2:OK]
Jul 11 16:10:45.74: [21216]: <-- [21:ATS8=2S7=60&K3&D3&C1\r]
Jul 11 16:10:45.91: [21216]: --> [2:OK]
Jul 11 16:10:45.91: [21216]: <-- [12:AT+FCLASS=2\r]
Jul 11 16:10:46.08: [21216]: --> [2:OK]
Jul 11 16:10:46.08: [21216]: <-- [10:AT+FTBC=0\r]
Jul 11 16:11:16.09: [21216]: MODEM <Timeout>
Jul 11 16:11:16.09: [21216]: <-- [10:AT+FBOR=0\r]
Jul 11 16:11:46.10: [21216]: MODEM <Timeout>
Jul 11 16:11:46.10: [21216]: <-- [13:AT+FPHCTO=30\r]
Jul 11 16:11:46.26: [21216]: --> [2:OK]
Jul 11 16:11:46.26: [21216]: <-- [24:AT+FDCC=1,5,2,2,1,0,0,0\r]
Jul 11 16:11:46.43: [21216]: --> [2:OK]
Jul 11 16:11:46.43: [21216]: <-- [5:ATM0\r]
Jul 11 16:11:46.59: [21216]: --> [2:OK]
Jul 11 16:11:46.63: [21216]: <-- [12:AT+FCLASS=2\r]
Jul 11 16:12:16.64: [21216]: MODEM <Timeout>
Jul 11 16:12:16.64: [21216]: <-- [10:AT+FTBC=0\r]
Jul 11 16:12:16.91: [21216]: --> [2:OK]
Jul 11 16:12:16.91: [21216]: <-- [10:AT+FBOR=0\r]
Jul 11 16:12:17.17: [21216]: --> [2:OK]
Jul 11 16:12:17.17: [21216]: <-- [13:AT+FPHCTO=30\r]
Jul 11 16:12:17.44: [21216]: --> [2:OK]
Jul 11 16:12:17.44: [21216]: <-- [24:AT+FDCC=1,5,2,2,1,0,0,0\r]
Jul 11 16:12:17.71: [21216]: --> [2:OK]
Jul 11 16:12:17.71: [21216]: <-- [23:AT+FLID="Enplater S.A"\r]
Jul 11 16:12:47.72: [21216]: MODEM <Timeout>
Jul 11 16:12:47.72: [21216]: SEND FAILED: Unable to configure modem for
fax use
Jul 11 16:12:47.72: [21216]: SESSION END
I've also noticed that when one of these errors happen, the job is
unqueued, can I configure HylaFax to don't unqueue the job is this
happens?
