|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
And still problems with rackmounted Zyxel.. :-(
And I still got problems.. I got a tip to change the modem
from class 2.0 to class 2, but even that didn't help.
The only dif was that in class 2 it hangs up with FHNG:20
after the AT+FDIS command instead of with FHS:20 after
the FDT command...
Now here I have TWO session traces.
The first one is from my GOOD (standalone Zyxel 1496e on server 1)
to my faxmachine (a Nucleus) using hylafax 3.0pl1..:
MODEM ZYXEL U1496S/V 6.12 P
Apr 16 12:05:55.35: [ 8779]: SESSION BEGIN
Apr 16 12:05:55.35: [ 8779]: DELAY 2600 ms
Apr 16 12:05:57.97: [ 8779]: <-- [43:AT&B1&N0&S0*F0S18=2S38.3=1S39=0E0V1Q0S0=0H0]
Apr 16 12:05:58.29: [ 8779]: --> [2:OK]
Apr 16 12:05:58.29: [ 8779]: <-- [20:ATS8=2S7=60&H3&D2&C1]
Apr 16 12:05:58.41: [ 8779]: --> [2:OK]
Apr 16 12:05:58.41: [ 8779]: <-- [13:AT+FCLASS=2.0]
Apr 16 12:05:58.64: [ 8779]: --> [2:OK]
Apr 16 12:05:58.64: [ 8779]: <-- [8:AT+FLO=2]
Apr 16 12:05:58.76: [ 8779]: --> [2:OK]
Apr 16 12:05:58.76: [ 8779]: <-- [8:AT+FPP=0]
Apr 16 12:05:58.88: [ 8779]: --> [2:OK]
Apr 16 12:05:58.88: [ 8779]: <-- [8:AT+FBO=0]
Apr 16 12:05:59.00: [ 8779]: --> [2:OK]
Apr 16 12:05:59.01: [ 8779]: <-- [9:AT+FCT=30]
Apr 16 12:05:59.12: [ 8779]: --> [2:OK]
Apr 16 12:05:59.12: [ 8779]: <-- [14:AT+FNR=1,1,1,1]
Apr 16 12:05:59.24: [ 8779]: --> [2:OK]
Apr 16 12:05:59.24: [ 8779]: <-- [8:AT+FIE=0]
Apr 16 12:05:59.36: [ 8779]: --> [2:OK]
Apr 16 12:05:59.37: [ 8779]: <-- [22:AT+FCC=1,5,2,2,1,0,0,0]
Apr 16 12:05:59.48: [ 8779]: --> [2:OK]
Apr 16 12:05:59.48: [ 8779]: <-- [4:ATM0]
Apr 16 12:05:59.60: [ 8779]: --> [2:OK]
Apr 16 12:05:59.61: [ 8779]: <-- [13:AT+FCLASS=2.0]
Apr 16 12:05:59.84: [ 8779]: --> [2:OK]
Apr 16 12:05:59.84: [ 8779]: <-- [8:AT+FLO=2]
Apr 16 12:05:59.96: [ 8779]: --> [2:OK]
Apr 16 12:05:59.96: [ 8779]: <-- [8:AT+FPP=0]
Apr 16 12:06:00.08: [ 8779]: --> [2:OK]
Apr 16 12:06:00.08: [ 8779]: <-- [8:AT+FBO=0]
Apr 16 12:06:00.20: [ 8779]: --> [2:OK]
Apr 16 12:06:00.20: [ 8779]: <-- [9:AT+FCT=30]
Apr 16 12:06:00.32: [ 8779]: --> [2:OK]
Apr 16 12:06:00.32: [ 8779]: <-- [14:AT+FNR=1,1,1,1]
Apr 16 12:06:00.44: [ 8779]: --> [2:OK]
Apr 16 12:06:00.44: [ 8779]: <-- [8:AT+FIE=0]
Apr 16 12:06:00.56: [ 8779]: --> [2:OK]
Apr 16 12:06:00.57: [ 8779]: <-- [22:AT+FCC=1,5,2,2,1,0,0,0]
Apr 16 12:06:00.68: [ 8779]: --> [2:OK]
Apr 16 12:06:00.68: [ 8779]: <-- [19:AT+FLI="+654753273"]
Apr 16 12:06:00.80: [ 8779]: --> [2:OK]
Apr 16 12:06:00.81: [ 8779]: DIAL 4753273@
Apr 16 12:06:00.81: [ 8779]: <-- [12:ATDT4753273@]
Apr 16 12:06:22.96: [ 8779]: --> [4:+FCO]
Apr 16 12:06:22.99: [ 8779]: --> [18:+FNF:BC 53 01 60 ]
Apr 16 12:06:22.99: [ 8779]: REMOTE NSF "BC 53 01 60"
Apr 16 12:06:22.99: [ 8779]: --> [26:+FCI: ]
Apr 16 12:06:23.00: [ 8779]: REMOTE CSI ""
Apr 16 12:06:23.00: [ 8779]: --> [20:+FIS:1,3,0,2,1,0,0,0]
Apr 16 12:06:23.00: [ 8779]: --> [2:OK]
Apr 16 12:06:23.00: [ 8779]: REMOTE best rate 9600 bit/s
Apr 16 12:06:23.01: [ 8779]: REMOTE max page width 1728 pixels in 215 mm
Apr 16 12:06:23.01: [ 8779]: REMOTE max unlimited page length
Apr 16 12:06:23.01: [ 8779]: REMOTE best vres 7.7 line/mm
Apr 16 12:06:23.01: [ 8779]: REMOTE best format 2-D MR
Apr 16 12:06:23.01: [ 8779]: REMOTE best 0 ms/scanline
Apr 16 12:06:23.01: [ 8779]: REMOTE does not support PostScript transfer
Apr 16 12:06:23.02: [ 8779]: USE 9600 bit/s
Apr 16 12:06:23.02: [ 8779]: USE 0 ms/scanline
Apr 16 12:06:23.02: [ 8779]: SEND file "docq/doc11029.cover;00"
Apr 16 12:06:23.03: [ 8779]: USE page width 1728 pixels in 215 mm
Apr 16 12:06:23.03: [ 8779]: USE unlimited page length
Apr 16 12:06:23.04: [ 8779]: USE 3.85 line/mm
Apr 16 12:06:23.04: [ 8779]: USE 1-D MR
Apr 16 12:06:23.04: [ 8779]: <-- [22:AT+FIS=0,3,0,2,0,0,0,0]
Apr 16 12:06:23.16: [ 8779]: --> [2:OK]
Apr 16 12:06:23.16: [ 8779]: <-- [6:AT+FDT]
Apr 16 12:06:28.94: [ 8779]: --> [20:+FCS:0,3,0,2,0,0,0,0]
Apr 16 12:06:28.95: [ 8779]: --> [7:CONNECT]
Apr 16 12:06:28.95: [ 8779]: SEND begin page
Apr 16 12:06:28.97: [ 8779]: <-- data [1025]
Apr 16 12:06:28.98: [ 8779]: <-- data [1033]
Apr 16 12:06:28.98: [ 8779]: <-- data [1042]
Apr 16 12:06:28.99: [ 8779]: <-- data [1037]
Apr 16 12:06:28.99: [ 8779]: <-- data [1025]
Apr 16 12:06:29.99: [ 8779]: <-- data [1026]
Apr 16 12:06:30.00: [ 8779]: <-- data [1024]
Apr 16 12:06:30.00: [ 8779]: <-- data [1035]
Apr 16 12:06:31.01: [ 8779]: <-- data [1030]
Apr 16 12:06:31.02: [ 8779]: <-- data [1024]
Apr 16 12:06:31.02: [ 8779]: <-- data [870]
Apr 16 12:06:31.03: [ 8779]: SENT 11108 bytes of data
Apr 16 12:06:31.03: [ 8779]: SEND 1D RTC
Apr 16 12:06:31.03: [ 8779]: <-- data [9]
Apr 16 12:06:31.03: [ 8779]: SEND end page
Apr 16 12:06:31.04: [ 8779]: SEND send MPS (more pages, same document)
Apr 16 12:06:31.04: [ 8779]: <-- data [2]
Apr 16 12:06:41.66: [ 8779]: --> [2:OK]
Apr 16 12:06:41.67: [ 8779]: SEND recv MCF (message confirmation)
Apr 16 12:06:41.68: [ 8779]: SEND FAX: FROM root@ixora.singnet.com.sg TO +654753273 (docq/doc11029.cover;00 sent in 0:46)
Apr 16 12:06:41.69: [ 8779]: SEND file "docq/doc11029;00"
Apr 16 12:06:41.70: [ 8779]: USE page width 1728 pixels in 215 mm
Apr 16 12:06:41.71: [ 8779]: USE unlimited page length
Apr 16 12:06:41.71: [ 8779]: USE 3.85 line/mm
Apr 16 12:06:41.71: [ 8779]: USE 1-D MR
Apr 16 12:06:41.71: [ 8779]: <-- [6:AT+FDT]
Apr 16 12:06:41.83: [ 8779]: --> [7:CONNECT]
Apr 16 12:06:41.84: [ 8779]: SEND begin page
Apr 16 12:06:41.85: [ 8779]: <-- data [1026]
Apr 16 12:06:41.86: [ 8779]: <-- data [1024]
Apr 16 12:06:41.86: [ 8779]: <-- data [1024]
Apr 16 12:06:41.87: [ 8779]: <-- data [1024]
Apr 16 12:06:41.87: [ 8779]: <-- data [454]
Apr 16 12:06:42.87: [ 8779]: SENT 4550 bytes of data
Apr 16 12:06:42.88: [ 8779]: SEND 1D RTC
Apr 16 12:06:42.88: [ 8779]: <-- data [9]
Apr 16 12:06:42.88: [ 8779]: SEND end page
Apr 16 12:06:42.88: [ 8779]: SEND send EOP (no more pages or documents)
Apr 16 12:06:42.89: [ 8779]: <-- data [2]
Apr 16 12:06:50.45: [ 8779]: --> [7:+FHS:00]
Apr 16 12:06:50.46: [ 8779]: REMOTE HANGUP: Normal and proper end of connection (code 0)
Apr 16 12:06:50.46: [ 8779]: SEND recv MCF (message confirmation)
Apr 16 12:06:50.47: [ 8779]: SEND FAX: FROM root@ixora.singnet.com.sg TO +654753273 (docq/doc11029;00 sent in 0:09)
Apr 16 12:06:50.48: [ 8779]: <-- [4:ATH0]
Apr 16 12:06:50.49: [ 8779]: --> [2:OK]
Apr 16 12:06:50.49: [ 8779]: SESSION END
and the second one is from my BAD modem on the new server
to the same faxmachine using hylafax 4.0...
MODEM ZYXEL U1496R+/V 6.14
Apr 16 15:52:01.01: [19601]: SESSION BEGIN 00000061 654753273
Apr 16 15:52:01.01: [19601]: SEND FAX: JOB 21 DEST 4753273 COMMID 00000061
Apr 16 15:52:01.01: [19601]: MODEM set DTR OFF
Apr 16 15:52:01.01: [19601]: DELAY 2600 ms
Apr 16 15:52:03.62: [19601]: MODEM set DTR ON
Apr 16 15:52:03.62: [19601]: MODEM set baud rate: 38400 baud, input flow RTS/CTS, output flow RTS/CTS
Apr 16 15:52:03.62: [19601]: MODEM flush i/o
Apr 16 15:52:03.62: [19601]: <-- [44:AT&B1&N0&S0*F0S18=2S38.3=1S39=0E0V1Q0S0=0H0\r]
Apr 16 15:52:03.84: [19601]: --> [2:OK]
Apr 16 15:52:03.84: [19601]: <-- [21:ATS8=2S7=60&H3&D2&C1\r]
Apr 16 15:52:03.86: [19601]: --> [2:OK]
Apr 16 15:52:03.86: [19601]: <-- [14:AT+FCLASS=2.0\r]
Apr 16 15:52:03.99: [19601]: --> [2:OK]
Apr 16 15:52:03.99: [19601]: <-- [9:AT+FLO=2\r]
Apr 16 15:52:04.00: [19601]: --> [2:OK]
Apr 16 15:52:04.00: [19601]: <-- [9:AT+FPP=0\r]
Apr 16 15:52:34.00: [19601]: MODEM TIMEOUT: reading line from modem
Apr 16 15:52:34.00: [19601]: MODEM <Timeout>
Apr 16 15:52:34.00: [19601]: <-- [9:AT+FBO=0\r]
Apr 16 15:52:34.01: [19601]: --> [2:OK]
Apr 16 15:52:34.01: [19601]: <-- [10:AT+FCT=30\r]
Apr 16 15:52:34.02: [19601]: --> [2:OK]
Apr 16 15:52:34.02: [19601]: <-- [15:AT+FNR=1,1,1,1\r]
Apr 16 15:52:34.03: [19601]: --> [2:OK]
Apr 16 15:52:34.03: [19601]: <-- [9:AT+FIE=0\r]
Apr 16 15:52:34.04: [19601]: --> [2:OK]
Apr 16 15:52:34.04: [19601]: <-- [9:AT+FBU=1\r]
Apr 16 15:52:34.05: [19601]: --> [2:OK]
Apr 16 15:52:34.05: [19601]: <-- [23:AT+FCC=1,5,2,2,1,0,0,0\r]
Apr 16 15:52:34.07: [19601]: --> [2:OK]
Apr 16 15:52:34.07: [19601]: <-- [7:ATM1L5\r]
Apr 16 15:52:34.08: [19601]: --> [2:OK]
Apr 16 15:52:34.08: [19601]: STATE CHANGE: RUNNING -> SENDING
Apr 16 15:52:34.08: [19601]: MODEM input buffering enabled
Apr 16 15:52:34.08: [19601]: <-- [14:AT+FCLASS=2.0\r]
Apr 16 15:52:34.31: [19601]: --> [2:OK]
Apr 16 15:52:34.31: [19601]: <-- [9:AT+FLO=2\r]
Apr 16 15:52:34.42: [19601]: --> [2:OK]
Apr 16 15:52:34.42: [19601]: <-- [9:AT+FPP=0\r]
Apr 16 15:52:34.53: [19601]: --> [2:OK]
Apr 16 15:52:34.53: [19601]: <-- [9:AT+FBO=0\r]
Apr 16 15:52:34.64: [19601]: --> [2:OK]
Apr 16 15:52:34.64: [19601]: <-- [10:AT+FCT=30\r]
Apr 16 15:52:34.75: [19601]: --> [2:OK]
Apr 16 15:52:34.75: [19601]: <-- [15:AT+FNR=1,1,1,1\r]
Apr 16 15:52:34.86: [19601]: --> [2:OK]
Apr 16 15:52:34.86: [19601]: <-- [9:AT+FIE=0\r]
Apr 16 15:52:34.97: [19601]: --> [2:OK]
Apr 16 15:52:34.97: [19601]: <-- [9:AT+FBU=1\r]
Apr 16 15:52:35.08: [19601]: --> [2:OK]
Apr 16 15:52:35.08: [19601]: <-- [23:AT+FCC=1,5,2,2,1,0,0,0\r]
Apr 16 15:52:35.20: [19601]: --> [2:OK]
Apr 16 15:52:35.20: [19601]: <-- [17:AT+FLI="SingNet"\r]
Apr 16 15:52:35.31: [19601]: --> [2:OK]
Apr 16 15:52:35.31: [19601]: DIAL 4753273
Apr 16 15:52:35.31: [19601]: <-- [12:ATDT4753273\r]
Apr 16 15:52:54.26: [19601]: --> [4:+FCO]
Apr 16 15:52:54.26: [19601]: --> [18:+FNF:BC 53 01 60 ]
Apr 16 15:52:54.26: [19601]: REMOTE NSF "BC 53 01 60"
Apr 16 15:52:54.26: [19601]: --> [26:+FCI: ]
Apr 16 15:52:54.26: [19601]: REMOTE CSI ""
Apr 16 15:52:54.26: [19601]: --> [20:+FIS:1,3,0,2,1,0,0,0]
Apr 16 15:52:54.26: [19601]: --> [2:OK]
Apr 16 15:52:54.26: [19601]: REMOTE best rate 9600 bit/s
Apr 16 15:52:54.26: [19601]: REMOTE max page width 1728 pixels in 215 mm
Apr 16 15:52:54.26: [19601]: REMOTE max unlimited page length
Apr 16 15:52:54.26: [19601]: REMOTE best vres 7.7 line/mm
Apr 16 15:52:54.26: [19601]: REMOTE best format 2-D MR
Apr 16 15:52:54.26: [19601]: REMOTE best 0 ms/scanline
Apr 16 15:52:54.26: [19601]: USE 9600 bit/s
Apr 16 15:52:54.26: [19601]: USE 0 ms/scanline
Apr 16 15:52:54.26: [19601]: SEND file "docq/doc21.cover;30"
Apr 16 15:52:54.26: [19601]: USE page width 1728 pixels in 215 mm
Apr 16 15:52:54.26: [19601]: USE unlimited page length
Apr 16 15:52:54.26: [19601]: USE 3.85 line/mm
Apr 16 15:52:54.26: [19601]: USE 1-D MR
Apr 16 15:52:54.26: [19601]: <-- [23:AT+FIS=0,3,0,2,0,0,0,0\r]
Apr 16 15:53:01.35: [19601]: --> [7:+FHS:20]
Apr 16 15:53:01.38: [19601]: REMOTE HANGUP: Unspecified Transmit Phase B error (code 20)
Apr 16 15:53:01.38: [19601]: --> [2:OK]
Apr 16 15:53:01.38: [19601]: <-- [7:AT+FDT\r]
Apr 16 15:53:01.75: [19601]: --> [10:NO CARRIER]
Apr 16 15:53:01.75: [19601]: MODEM No carrier
Apr 16 15:53:01.75: [19601]: SEND: Unspecified Transmit Phase B error; Giving up after 3 attempts to send same page "docq/doc21.cover;30", dir
num 0
Apr 16 15:53:01.75: [19601]: <-- [5:ATH0\r]
Apr 16 15:53:02.06: [19601]: --> [2:OK]
Apr 16 15:53:02.06: [19601]: MODEM set DTR OFF
Apr 16 15:53:02.06: [19601]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
Apr 16 15:53:02.06: [19601]: SESSION END
Can anyone spot the differemces here that could cause the problem?
Any help is appreciated..
Mathias Koerber | Tel: +65 / 471 9820 | mathias@staff.singnet.com.sg
SingNet NOC | Fax: +65 / 475 3273 | mathias@koerber.org
Q'town Tel. Exch. | PGP: Keyid: 768/25E082BD, finger mathias@singnet.com.sg
2 Stirling Rd | 1A 8B FC D4 93 F1 9A FC BD 98 A3 1A 0E 73 01 65
S'pore 148943 | Disclaimer: I speak only for myself
* Eifersucht ist eine Leidenschaft, die mit Eifer sucht, was Leiden schafft *
