Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Waiting for modem to come ready



Alexandre Meissonnier wrote:
    
    I have now re-installed HylaFAX and run some more tests. Recieving =
    incoming faxes works fine, but as soon al I try to send a fax, =
    everything is blocked - both send and recieve.
    
    The source of this problem seems to be the faxgetty process. When =
    faxgetty is running, no other processes (especially faxq) can access the =
    modem.=20
    When i change my inittab entry to 'faxgetty -D tty2A', I get back to a =
    send-only system.
    
    
    -----Original Message-----
    From:	Matthias.Apitz@softcon.de [SMTP:Matthias.Apitz@softcon.de]
    Sent:	Tuesday, April 08, 1997 8:13 AM
    To:	Alexandre Meissonnier
    Cc:	flexfax@sgi.com
    Subject:	Re: Waiting for modem to come ready
    
    Did you run faxsetup(1M) or faxaddmodem(1M) for this modem?
    Why do you *copied* it from the spool/config?
    
    [Alexandre Meissonnier]  As said above, I re-installed everything, and =
    had faxsetup and faxaddmodem do the configuration. The only thing I =
    changed manually is the ModemDialCmd to tell the modem not to wait for a =
    dial tone.
       =20
    
    Please enable the tracing level for the FIFO messages passed
    between the daemons=20
    
    [Alexandre Meissonnier]  How can I do this? I didn't find a config entry =
    for this.

read the man page of config(4F) and look for the parameter
ServerTracing and the value for "FIFO Messages".
    
you have also to configure the syslogd(1M) if not already done;
    
    . Please show your full
    /etc/inittab. Are there "off" lines for the label "fax" or
    other lines for /dev/tty2A or /dev/tty2a?
    
    [Alexandre Meissonnier]  Here are the significant lines. There are no =
    other lines for the label "fax".
    
    Se2A:234:off:/etc/getty -t60 tty2A 9600
    Se2a:234:off:/etc/getty tty2a m

please comment or remove the above two lines and re-start init with
a kill -HUP

    fax:234:respawn:/usr/local/HylaFAX-v4.0/slib/faxgetty tty2A
    
	matthias



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services