Re: {HELP} I cannot receive correct fax

[Phil Watkinson <pkw@elgro.co.uk>]

At 15:45 18/03/97 +0800, Qian Guo Yu wrote:
[snip]
>----------
>#
># NB: If you need to prefix phone numbers to get through a PBX,
>#     put it in the ModemDialCmd; e.g. "DT9%s@".
>ModemDialCmd:           ATD9T%s         # no '@' 'cuz then busy not recognized
>NoCarrierRetrys:        3               # retry 3 times on no carrier
>#
[more snips]

Looks like you've misplaced the '9' in the dial command - it should say
'ATDT9%s' - or 'ATDP9%s' if you fancy taking advantage of pulse dialling.

Cheers,
Phil Watkinson,
Bosotn, UK.