|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: {HELP} I cannot receive correct fax
----------
X-Sun-Data-Type: text
X-Sun-Data-Description: text
X-Sun-Data-Name: text
X-Sun-Charset: us-ascii
X-Sun-Content-Lines: 31
I am so sorry for my carelessness to attach so many times FAQ.
I can't find my server trace. Attached is a session log and
a modem configuration file.
Thank you for your help.
Qian Guo Yu
>
> Qian Guo Yu wrote:
>
> I've installed Hylafax successfully. When I send fax, no matter it's
> TIFF image or ASCII text, the receiver only get some of the context.
> (it looks like half page, and some lines are merged together).
>
> Platform: Pentiem PC
> OS: SCO UnixWare 2.1
> Hylafax: V4.0pl1
> Modem: ZyXEL Elite 2864
>
> A tried to find answer from Hylafax FAQ, the question 141 is similar
> to my question, but to no avail.
>
> Any suggestions or comments are really appreciated.
>
> Please provide a server trace and a session log;
> (BTW: No need to include the text of the FAQ 3 times.)
>
> matthias
----------
X-Sun-Data-Type: default
X-Sun-Data-Name: aaa
X-Sun-Charset: us-ascii
X-Sun-Content-Lines: 52
Mar 13 17:25:46.78: [22634]: SESSION BEGIN 00000035 657744998
Mar 13 17:25:46.79: [22634]: SEND FAX: JOB 39 DEST 7744998 COMMID 00000035
Mar 13 17:25:46.82: [22634]: DELAY 2600 ms
Mar 13 17:25:49.42: [22634]: <-- [39:AT&B1&N0&S0*F0S18=4S38.3=1E0V1Q0S0=0H0\r]
Mar 13 17:25:49.62: [22634]: --> [2:OK]
Mar 13 17:25:49.62: [22634]: <-- [21:ATS8=2S7=60&H3&D2&C1\r]
Mar 13 17:25:49.66: [22634]: --> [2:OK]
Mar 13 17:25:49.66: [22634]: <-- [14:AT+FCLASS=2.0\r]
Mar 13 17:25:49.70: [22634]: --> [2:OK]
Mar 13 17:25:49.70: [22634]: <-- [9:AT+FLO=2\r]
Mar 13 17:25:49.74: [22634]: --> [2:OK]
Mar 13 17:25:49.74: [22634]: <-- [9:AT+FPP=0\r]
Mar 13 17:25:49.78: [22634]: --> [2:OK]
Mar 13 17:25:49.78: [22634]: <-- [9:AT+FBO=0\r]
Mar 13 17:25:49.82: [22634]: --> [2:OK]
Mar 13 17:25:49.82: [22634]: <-- [10:AT+FCT=30\r]
Mar 13 17:25:49.86: [22634]: --> [2:OK]
Mar 13 17:25:49.86: [22634]: <-- [15:AT+FNR=1,1,1,1\r]
Mar 13 17:25:49.90: [22634]: --> [2:OK]
Mar 13 17:25:49.90: [22634]: <-- [9:AT+FIE=0\r]
Mar 13 17:25:49.94: [22634]: --> [2:OK]
Mar 13 17:25:49.94: [22634]: <-- [23:AT+FCC=1,5,2,2,1,0,0,0\r]
Mar 13 17:25:49.98: [22634]: --> [2:OK]
Mar 13 17:25:49.98: [22634]: <-- [5:ATM0\r]
Mar 13 17:25:50.02: [22634]: --> [2:OK]
Mar 13 17:25:50.02: [22634]: Unable to set RT scheduling parameters: Invalid argument
Mar 13 17:25:50.03: [22634]: <-- [14:AT+FCLASS=2.0\r]
Mar 13 17:25:50.16: [22634]: --> [2:OK]
Mar 13 17:25:50.16: [22634]: <-- [9:AT+FLO=2\r]
Mar 13 17:25:50.30: [22634]: --> [2:OK]
Mar 13 17:25:50.30: [22634]: <-- [9:AT+FPP=0\r]
Mar 13 17:25:50.44: [22634]: --> [2:OK]
Mar 13 17:25:50.44: [22634]: <-- [9:AT+FBO=0\r]
Mar 13 17:25:50.58: [22634]: --> [2:OK]
Mar 13 17:25:50.58: [22634]: <-- [10:AT+FCT=30\r]
Mar 13 17:25:50.72: [22634]: --> [2:OK]
Mar 13 17:25:50.72: [22634]: <-- [15:AT+FNR=1,1,1,1\r]
Mar 13 17:25:50.86: [22634]: --> [2:OK]
Mar 13 17:25:50.86: [22634]: <-- [9:AT+FIE=0\r]
Mar 13 17:25:51.00: [22634]: --> [2:OK]
Mar 13 17:25:51.00: [22634]: <-- [23:AT+FCC=1,5,2,2,1,0,0,0\r]
Mar 13 17:25:51.14: [22634]: --> [2:OK]
Mar 13 17:25:51.14: [22634]: <-- [22:AT+FLI="+65-771-5230"\r]
Mar 13 17:25:51.28: [22634]: --> [2:OK]
Mar 13 17:25:51.33: [22634]: DIAL 7744998
Mar 13 17:25:51.33: [22634]: <-- [13:ATD9T7744998\r]
Mar 13 17:26:00.42: [22634]: --> [4:BUSY]
Mar 13 17:26:00.43: [22634]: SEND FAILED: Busy signal detected
Mar 13 17:26:00.43: [22634]: <-- [5:ATH0\r]
Mar 13 17:26:00.70: [22634]: --> [2:OK]
Mar 13 17:26:00.71: [22634]: SESSION END
----------
X-Sun-Data-Type: default
X-Sun-Data-Name: bbb
X-Sun-Charset: us-ascii
X-Sun-Content-Lines: 72
CountryCode: 65
AreaCode: ""
FAXNumber: +65.771.5230
LongDistancePrefix: ""
InternationalPrefix: 001
DialStringRules: etc/dialrules
ServerTracing: 1
SessionTracing: 11
RecvFileMode: 0666
LogFileMode: 0666
DeviceMode: 0666
RingsBeforeAnswer: 1
SpeakerVolume: off
#GettyArgs: "-h %l dx_%s"
LocalIdentifier: +65-771-5230
TagLineFont: etc/lutRS18.pcf
TagLineFormat: "From %%l(ISS FaxServer)|%c|Page %%p of %%t"
#QualifyTSI: etc/tsi
MaxRecvPages: 100
JobReqBusy: 180
JobReqDataConn: 60
JobReqNoAnswer: 60
JobReqNoCarrier: 60
JobReqNoFCon: 60
JobReqOther: 60
MaxConcurrentJobs: 2
NoCarrierRetrys: 2
NotifyCmd: bin/notify
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType: Class2.0 # use class 2.0 interface
ModemRate: 38400 # 38.4 works fine
ModemFlowControl: rtscts # default
#
ModemNoFlowCmd: AT&H0 # disable flow control
ModemHardFlowCmd: AT&H3 # hardware flow control
ModemSoftFlowCmd: AT&H4 # software flow control
ModemSetupDTRCmd: AT&D2 # DTR off causes modem to hang up
ModemSetupDCDCmd: AT&C1 # DCD tracks carrier
#
ModemSetupAACmd: AT+FAA=1 # enable in current class
#
# Additional reset commands:
#
# &B1 DTE-DCE rate is fixed at DTE setting
# &N0 Auto-negotiate highest possible DCE-DCE link rate
# &S0 DSR always on
# *F0 Deny remote configuration
# S18=4 Receive at 38400
# S38.3=1 DCD on/off sequence follows UNIX standard; also
# fix receiving baud rate at S18 value
#
ModemResetCmds: AT&B1&N0&S0*F0S18=4S38.3=1
#
# NB: If you need to prefix phone numbers to get through a PBX,
# put it in the ModemDialCmd; e.g. "DT9%s@".
ModemDialCmd: ATD9T%s # no '@' 'cuz then busy not recognized
NoCarrierRetrys: 3 # retry 3 times on no carrier
#
ModemSetVolumeCmd: "ATM0 ATM1L1 ATM1L3 ATM1L5 ATM1L7"
#
# Caller ID configuration setup.
#
#QualifyCID: etc/cid # CID access control list file
#CIDNumber: "CALLER NUMBER: " # pattern string for phone number info
#CIDName: "CALLER NAME: " # pattern string for identity info
#
# PagerSetupCmds: AT&K0&N15 # use V.22 at 1200 bps (PageNet)
