Re: USR 33.6 modem

["Ed Saffle" <ed@UU.NET>]

  I've got a sunos box with 4 sportster 28.8 modems that work just
fine.  When one of the modems died I'd accidentally got a 33.6
as a replacement but could never get it to work.  The symptoms
were very much like those you noted below.  Putting another
28.8 in place worked.  The 33.6 did work when I configured it 
as class1 but so that I could have consistant hardware and a
consistant set of configs I went for the 28.8 in the end.

 
Anthony Truscott writes:
> I am running Linux 2.0.0 with HylaFax 4.0pl1 and am having trouble with m=
> y USR modem (which I=20
> understand is common).
> The system receives faxes fine, but outgoing faxes abort after dialing.
> 
> Here's the log file...
> 
> Mar 11 17:38:33.60: [  144]: SESSION BEGIN 00000002 16195351982
> Mar 11 17:38:33.61: [  144]: SEND FAX: JOB 1 DEST 5351982 COMMID 00000002
> Mar 11 17:38:33.61: [  144]: DELAY 2600 ms
> Mar 11 17:38:36.22: [  144]: <-- [17:ATE0V1Q0X4S0=3D0H0\r]
> Mar 11 17:38:36.35: [  144]: --> [2:OK]
> Mar 11 17:38:36.35: [  144]: <-- [32:ATS8=3D2S7=3D60&H1&I0&R2S13=3D1&D2&C=
> 1\r]
> Mar 11 17:38:36.49: [  144]: --> [2:OK]
> Mar 11 17:38:36.49: [  144]: <-- [14:AT+FCLASS=3D2.0\r]
> Mar 11 17:38:36.63: [  144]: --> [2:OK]
> Mar 11 17:38:36.63: [  144]: <-- [9:AT+FLO=3D2\r]
> Mar 11 17:38:36.77: [  144]: --> [2:OK]
> Mar 11 17:38:36.77: [  144]: <-- [9:AT+FPP=3D0\r]
> Mar 11 17:38:36.91: [  144]: --> [2:OK]
> Mar 11 17:38:36.91: [  144]: <-- [9:AT+FBO=3D0\r]
> Mar 11 17:38:37.05: [  144]: --> [2:OK]
> Mar 11 17:38:37.05: [  144]: <-- [10:AT+FCT=3D30\r]
> Mar 11 17:38:37.19: [  144]: --> [2:OK]
> Mar 11 17:38:37.19: [  144]: <-- [15:AT+FNR=3D1,1,1,1\r]
> Mar 11 17:38:37.33: [  144]: --> [2:OK]
> Mar 11 17:38:37.33: [  144]: <-- [9:AT+FIE=3D0\r]
> Mar 11 17:38:37.47: [  144]: --> [2:OK]
> Mar 11 17:38:37.48: [  144]: <-- [23:AT+FCC=3D1,5,2,2,0,0,0,0\r]
> Mar 11 17:38:37.61: [  144]: --> [2:OK]
> Mar 11 17:38:37.61: [  144]: <-- [5:ATM0\r]
> Mar 11 17:38:37.75: [  144]: --> [2:OK]
> Mar 11 17:38:37.76: [  144]: <-- [14:AT+FCLASS=3D2.0\r]
> Mar 11 17:38:37.99: [  144]: --> [2:OK]
> Mar 11 17:38:37.99: [  144]: <-- [9:AT+FLO=3D2\r]
> Mar 11 17:38:38.23: [  144]: --> [2:OK]
> Mar 11 17:38:38.23: [  144]: <-- [9:AT+FPP=3D0\r]
> Mar 11 17:38:38.47: [  144]: --> [2:OK]
> Mar 11 17:38:38.47: [  144]: <-- [9:AT+FBO=3D0\r]
> Mar 11 17:38:38.71: [  144]: --> [2:OK]
> Mar 11 17:38:38.71: [  144]: <-- [10:AT+FCT=3D30\r]
> Mar 11 17:38:38.95: [  144]: --> [2:OK]
> Mar 11 17:38:38.95: [  144]: <-- [15:AT+FNR=3D1,1,1,1\r]
> Mar 11 17:38:39.19: [  144]: --> [2:OK]
> Mar 11 17:38:39.19: [  144]: <-- [9:AT+FIE=3D0\r]
> Mar 11 17:38:39.43: [  144]: --> [2:OK]
> Mar 11 17:38:39.44: [  144]: <-- [23:AT+FCC=3D1,5,2,2,0,0,0,0\r]
> Mar 11 17:38:39.67: [  144]: --> [2:OK]
> Mar 11 17:38:39.67: [  144]: <-- [19:AT+FLI=3D"Linux Fax"\r]
> Mar 11 17:38:39.91: [  144]: --> [2:OK]
> Mar 11 17:38:40.31: [  144]: DIAL 5351982
> Mar 11 17:38:40.32: [  144]: <-- [12:ATDT5351982\r]
> Mar 11 17:38:57.88: [  144]: --> [4:+FCO]
> Mar 11 17:39:00.98: [  144]: --> [38:+FNF:=1B+FCI:"          6194584216"=14=
> +FIS]
> Mar 11 17:39:00.98: [  144]: REMOTE NSF "=1B+FCI:"          6194584216"=14=
> +FIS"
> Mar 11 17:39:00.99: [  144]: --> [57:1,3,0,2,0,0,1,4=B4=9A=F7l=1DU=F7=E9=CA=
> =89=06=94=A0=E6=8C=E9H%=E9=CE=94:=B4=A7-=05gP;jPu=92T=A9=0B=CD)*Y=EAO]
> Mar 11 17:39:00.99: [  144]: --> [42:Y=DA=0B=08=1B=AD=AD=13=9B=D9=F1=ACk=C1=
> 4?=C5=A3=E25=B3=1A=CA$=07=F3=98=9E=B3=95=FA=AF|=81=E14=19u=F4=E5U=8D]
> Mar 11 17:39:40.98: [  144]: REMOTE HANGUP: Unspecified Transmit Phase B =
> error (code 20)
> Mar 11 17:39:40.99: [  144]: SEND FAILED: Unspecified Transmit Phase B er=
> ror
> Mar 11 17:39:40.99: [  144]: <-- [5:ATH0\r]
> Mar 11 17:39:41.22: [  144]: --> [4:ATH0]
> Mar 11 17:39:41.22: [  144]: --> [2:OK]
> Mar 11 17:39:41.23: [  144]: SESSION END
> 
> I understand this is not a new problem, but I have not found a definative=
>  answer or fix (if=20
> there is one).  I have an older Supra modem which works for Class 1 opera=
> tion, but I'd prefer to=20
> use my Sportster 33.6.
> 
> Thanks for any help.
> 
> Tony
> atruscott@ucsd.edu
>