Re: recvq file incomplete ...

[Ricardo Kleemann <ricardo@americasnet.com>]

Hmmm interesting...

The fax was one that I sent myself... and it was a full page.

below is the log, which states 84 lines and states no errors... :(

If anyone can help me out on this one... ;) Thanks!

--------------------------------------------------------------------
Jan 15 07:48:57.27: [  320]: SESSION BEGIN 00000011 17148558041
Jan 15 07:48:57.34: [  320]: <-- [4:ATA\r]
Jan 15 07:48:58.61: [  320]: --> [3:FAX]
Jan 15 07:48:58.64: [  320]: ANSWER: FAX CONNECTION
Jan 15 07:48:58.65: [  320]: RECV FAX: begin
Jan 15 07:49:04.39: [  320]: --> [5:+FCON]
Jan 15 07:49:06.01: [  320]: --> [29:+FTSI: "           183935268"]
Jan 15 07:49:06.01: [  320]: REMOTE TSI "183935268"
Jan 15 07:49:06.42: [  320]: --> [22:+FDCS: 0,5,0,0,1,0,0,0]
Jan 15 07:49:06.46: [  320]: REMOTE wants 14400 bit/s
Jan 15 07:49:06.46: [  320]: REMOTE wants page width 1728 pixels in 215 mm
Jan 15 07:49:06.46: [  320]: REMOTE wants A4 page length (297 mm)
Jan 15 07:49:06.46: [  320]: REMOTE wants 3.85 line/mm
Jan 15 07:49:06.46: [  320]: REMOTE wants 2-D MR
Jan 15 07:49:06.46: [  320]: --> [2:OK]
Jan 15 07:49:06.46: [  320]: <-- [7:AT+FDR\r]
Jan 15 07:49:09.39: [  320]: --> [5:+FCFR]
Jan 15 07:49:11.65: [  320]: --> [22:+FDCS: 0,5,0,0,1,0,0,0]
Jan 15 07:49:11.65: [  320]: REMOTE wants 14400 bit/s
Jan 15 07:49:11.65: [  320]: REMOTE wants page width 1728 pixels in 215 mm
Jan 15 07:49:11.65: [  320]: REMOTE wants A4 page length (297 mm)
Jan 15 07:49:11.65: [  320]: REMOTE wants 3.85 line/mm
Jan 15 07:49:11.65: [  320]: REMOTE wants 2-D MR
Jan 15 07:49:11.65: [  320]: --> [7:CONNECT]
Jan 15 07:49:11.65: [  320]: RECV: begin page
Jan 15 07:49:11.67: [  320]: RECV: send trigger 021
Jan 15 07:49:11.67: [  320]: <-- data [1]
Jan 15 07:49:43.80: [  320]: RECV: 84 total lines, 0 bad lines, 0 consecutive bad lines
Jan 15 07:49:43.80: [  320]: --> [17:+FPTS: 2,2219,0,0]
Jan 15 07:49:44.38: [  320]: --> [7:+FET: 2]
Jan 15 07:49:44.38: [  320]: RECV recv EOP (no more pages or documents)
Jan 15 07:49:44.38: [  320]: --> [2:OK]
Jan 15 07:49:44.39: [  320]: RECV send MCF (message confirmation)
Jan 15 07:49:44.40: [  320]: RECV FAX (00000011): from 183935268, page 1 in 0:38, A4, 3.85 line/mm, 2-D MR
Jan 15 07:49:44.40: [  320]: RECV FAX (00000011): recvq/fax00006.tif from 183935268, route to <unspecified>, 1 pages in 0:46
Jan 15 07:49:44.44: [  320]: <-- [7:AT+FDR\r]
Jan 15 07:49:47.25: [  320]: --> [8:+FHNG: 0]
Jan 15 07:49:47.25: [  320]: REMOTE HANGUP: Normal and proper end of connection (code 0)
Jan 15 07:49:47.25: [  320]: RECV FAX: bin/faxrcvd "recvq/fax00006.tif" "ttyS2" "00000011" ""
Jan 15 07:49:48.61: [  320]: RECV FAX: end
Jan 15 07:49:48.61: [  320]: SESSION END


On Sat, 11 Jan 1997, Ivan Kohler wrote:

> At 03:09 PM 1/15/97 -0800, Ricardo Kleemann wrote:
> >Hi guys,
> >
> >Today I did my first test receiving a fax.
> >The modem picked up and answered properly; the log file tells me
> >everything went ok. No errors shown on the log.
> >
> >It also shows:
> >RECV: 84 total lines, 0 bad lines, 0 consecutive bad lines
> >
> >However, the recvq file, named c00006.tif, is only 1491 bytes. I brought
> >up the image and it looks like it was only the first few
> >"lines", it is basically 8.5" wide and only 1/2" long/tall.
> >
> >Why would the transmission be ok, as reported by the log, but the fax
> >image so small?
> 
> 84 lines *is* a fax only (about) 1/2" long.  Without seeing your logging
> information, I of course can't be sure (and I'm no HylaFax guru), but it
> looks simply like someone sent you a tiny fax (or there was a transmission
> error that somehow aborted the connection).
> 
>