Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] Hylafax+iaxmodem inbound routing based on DID?
When you dial the iaxmodem, you need to append the DID that is coming in on
the line:
exten => 900,1,Dial(IAX2/iaxmodem0/${DID},10,r)
I set a ${DID} variable because of the way we route calls, but if you are
catching the fax right off of inbound call, you can probably pass ${EXTEN}.
The ${DID} variable gets set as $CALLID4 in Hylafax, where you can then
route in FaxDispatch:
case "$CALLID4" in
8001112222)
SENDTO="joeschmoe@xxxxxxxxxxxxx"
;;
8005551111)
SENDTO="foo@xxxxxxx"
;;
*)
SENDTO="baz@xxxxxxxxxxxx"
;;
esac
Stephen Gerstacker
-----Original Message-----
From: hylafax-users-bounce@xxxxxxxxxxx
[mailto:hylafax-users-bounce@xxxxxxxxxxx] On Behalf Of hylafax@xxxxxxxxxxx
Sent: Thursday, May 25, 2006 14:09
To: hylafax_users
Subject: [hylafax-users] Hylafax+iaxmodem inbound routing based on DID?
Hi list!
I'm using HylaFax with iaxmodem and Asterisk as PBX. The pri has 100
DID's. With Asterisk it is possible to detect fax therefore I would like
to try the possibility to receive faxes on a DID and route them to a
specific user / printer (effectively the DID will work both for phone and
fax).
Is it possible to do routing based on the DID with Hylafax and iaxmodem?
When googling around I found some posts about the subject but not how to
do it.
Thanks!
Remco
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*